Variable Programming with ShopMill & ProgramGUIDE SINUMERIK 840D sl and 828D

[@x-prime8589]

Great video. English is not my main language, but I understood everything what you have done:) Now i know how to use this variables:) 👍🏻

[@MrCNC]

thanks for the feedback!

[@hariangadala8058]

👏👏👏 excellent sir it,s very useful subject thnk q sir.

[@MrCNC]

Thank you!

[@hariangadala8058]

Sir i requesting Plz Do The LUD Custom Cycle Creation

[@eng.raslan]

Great video as usual , many thanks for the continuous efforts

[@MrCNC]

Thank you for the feedback. Its great to hear that these videos are worth the effort.

[@hayatchauhan6590]

Nice sessions

[@MrCNC]

Thank you for the feeback! 👍

[@patrykkuniczak2516]

Good tutorial, thanks :)

[@MrCNC]

Glad it was helpful!

[@ammaskp5063]

Thanks lot. Sir🙏

[@MrCNC]

Most welcome

[@faroukmastercam4395]

What about broaching on lathe with siemens 828d is it possible 🤔

[@MrCNC]

yes this can be done on lathe

[@aghilpnair]

Hi How you can use special characters as a variable for engraving cycle for ex i want to use 160(0%) as a variable and i want to use that variable in engraving program

[@MrCNC]

yes this can be done

[@pozalujstapodpishus3062]

hello, do you now, how to change a level to parameter MD13200 $MN_MEAS_PROBE_LOW_ACTIVE[0] by command REDEF in mode 4(between servise level)? in manual do not write in whitch file do this and how its activated... so we need that this parameter will changed in level mode 4 (red key to 3 position), because $MN_MEAS_PROBE_LOW_ACTIVE=1 use for touch probe and $MN_MEAS_PROBE_LOW_ACTIVE=0 - to laser blum... so how to change APW 4 only for this parameter?

[@MrCNC]

are you able to manufacture password in? I would be surprised if the issues has anything to do with the access level. It may have more to do with the activation mode (e.g. CF , NC reset , PO reset, etc.)

[@chaosink7950]

hello sir can i know the steps to define oszi cycle on and off cycle for sinumerik data..for spindle speed variation..

[@MrCNC]

refer to this application guide. www.industry.siemens.com/topics/global/en/cnc4you/tips_and_tricks/Pages/vibration-control-turning-workpieces-with-sinumerik.aspx

[@jonnis240]

On cube machining. How do people write this on a Siemens 840d? 🙂 G54M98Q1000 G55M98Q1000 G56M98Q1000 M30 N1000(MILL SOMETHING) G1... M99

[@MrCNC]

If you want to call up a sub-program in the Sinumerik it is as simple as entering the name of the file. for example if you wanted to call up a program called cube.mpf it would look like this. When the system sees the name in will automatically look for a file with that same name. N1 G54N2 CUBEN3 G55N4 CUBE