You do a really good job of articulating how to setup a model using flaperons on Ethos. Thanks for this. This is what I needed after being used to opentx to see what it takes for Ethos.
@MrD2 жыл бұрын
Thanks Adam. I’m glad the video was helpful.
@kolbyblaine81447 ай бұрын
Thank you for these videos man, I appreciate it!
@mikekelly67742 жыл бұрын
Great tutorial. I've been watching tons of videos trying to choose a transmitter and I keep coming back to the X20S-blue. It looks like such a beauty. It's probably good that no one has them in stock or I would be much poorer by now.
@MrD2 жыл бұрын
They do feel great in the hands to 🤣 With each new update to ETHOS they keep getting better too. A nice thing I found the other day. If you’re plugged in to your computer, like to use an RC simulator. The transmitter will charge at the same time. I’d always recommend getting one in your hands if you can, no matter which transmitters you’re thinking of getting. Make sure they feel comfortable to you. We all have different physicalities after all.
@FANIS19502 жыл бұрын
Hello Mr.D thanks once again for your creating help . Yours tutorial are extremely. Belive me I feel realy sure that whatever problem I will face in the future ,concernig my X20S TX, you will be my instructor and for this I feel thankful . Now I know how to use the ail. as flp ,flaperon, to my spor plane. To have a nice week.
@MrD2 жыл бұрын
Thank you Fanis. I’m glad the videos help 🙂
@fastrack59 Жыл бұрын
Just purchased the blue Tandem X20 with TD R10 package from Horus. Stoked!
@MrD Жыл бұрын
Have fun with that transmitter :)
@daviddavis90619 ай бұрын
When I set up flaps I put them on 2 different channels and then assigned a 3 position switch. I put the switch in the first position with the servo arm off. I put the servo arm on with the switch in the first position so it would only move down when I went in the other 2 positions. This seems to work for standard flaps.
@typxxilps3 жыл бұрын
good job - even though I am not in the ethos world, but good to know that there is an alternative that seems to work and is achieving progress.
@MrD3 жыл бұрын
It is certainly getting better with each release Wolf. The touch screen keyboard is just great. Hopefully the EdgeTX guys will get something like that for touchscreen OpenTX radios. A lot of the traditional flying stuff is pretty straight forward.
@jgm911t2 жыл бұрын
Great video, exactly what I needed, thanks so much.
@MrD2 жыл бұрын
I'm glad it helped :)
@sheraazsuliman122211 ай бұрын
Extremely helpful as always, much appreciated Darren! recently moved to x20s from IX20 (my "Signal Holds" king) so I'll be watching many more of your vids. Luv your demo plane -any chance you can share a link to a file so i can have one cut pls? tia
@ereintsful Жыл бұрын
Thanks!
@MrD Жыл бұрын
Thank you Ed 👍🏻
@philiproyffe80223 жыл бұрын
Hi Darren, was a great help thanks so much 😁
@MrD3 жыл бұрын
Thank you Philip. I'm glad the video is helpful.
@bohan99573 жыл бұрын
Very, very nice tutorial, thank you!
@MrD3 жыл бұрын
You're welcome Bo, I'm glad it helped.
@UncleFesterUK3 жыл бұрын
Excellent vid, new radio coming on Monday, so will be in regularly for assist :) transferring images will be the same as the Horus 12 i imagine.
@MrD3 жыл бұрын
Its a great radio Cain. I’m sure you’ll enjoy it. Yes, the model images should be the same. All that I copied over from my X10S Express worked without issues. Places like Sky Racoon also have X20 images now too. By the way. Thank you for becoming a Patreon supporter. It means a great deal.
@victoriolepora5092 Жыл бұрын
Muy claro el video, gracias a el pude configurar flaperones
@MrD Жыл бұрын
Thanks, I’m glad the video was helpful 👍🏻
@hoyvintagecycles2936 Жыл бұрын
Phank you for the video!!!!!
@MrD Жыл бұрын
You’re welcome 👍🏻
@comtzu502 жыл бұрын
Thank you for the intro to flaps video!! Q: How do we adjust servo arm throws? Cheers!!
@MrD2 жыл бұрын
Throws are adjusted using the different holes on the servo arm and control horn. Closer to the servo is less throw. Closer to the control surface is more throw. This video is for iNav. But the physical throw parts are the same kzbin.info/www/bejne/qni1dY2wlsqlhac
@MrPumpkin363 ай бұрын
Hi Darren, great videos, keep ‘em coming! One question, having set up elevons with my x20s I have a question, the elevator trim is reversed even though the stick movement is correct. How can I rectify the elevator trim direction? Thanks, Peter
@Didi-dd7xt3 жыл бұрын
Great info. Would you show how to set flaperon with elevator mix as well.
@MrD3 жыл бұрын
Thanks Didi. I'll make a follow-up.
@TIC543212 жыл бұрын
Wondering if you could walk us through a full butterfly mix with elevator curve compensation that follows deployment... Thank for your videos, really helps us noobs
@MrD2 жыл бұрын
Hi Darrell. I'll add it to the list. To be honest, on my planes, I've not used elevator compensation with crow, as I find that with my setup, the flap and aileron are pretty balanced. But I can appreciate that this won't be the case on all models.
@TheGalifrey2 жыл бұрын
Great Video thanks
@MrD2 жыл бұрын
Thanks, glad you enjoyed it
@leobot4024 Жыл бұрын
How do you program Ailerons, elevator with different up and down turns? As an example 15 mm up and 7 mm down. The examples assume the same values up and down
@2.4g-rc Жыл бұрын
Nice tutorial. Looking for a little help. Looking to setup full spain ailerons, and crow/butterfly on a plane. Have you done this in any of your videos? Thanks!
@maverikmustang15692 жыл бұрын
Molto belli i tuoi video... complimenti. Ma volendo aggiungere all'abbassamento dei flap anche un po di picchiata al timone orizzontale? Cone bisogna fare?
@MrD2 жыл бұрын
È possibile aggiungere l'interruttore del deflettore al canale dell'elevatore e ridurre il peso per compensare solo la quantità necessaria. Con le percentuali di peso in ciascuna direzione, puoi farlo muovere solo in un modo.
@rafa0905812 жыл бұрын
Great video as usual, thanks…what about using a 3 position switch like no flaps-tkof flaps-landing flaps rather than a slide switch ?
@MrD2 жыл бұрын
Thanks Raphael. Yes, the 3 position switch will work just fine. You can add a curve to the switch to get the right level of flap required. Also there is the slow feature, so that the flaps extend and retract gradually.
@Maxradiocontrol6 ай бұрын
Hey I have a problem with my carnards they move opposite to the elevators 😊
@salvadorsordo5032 Жыл бұрын
Thank you so much for the flaperon video. I have a question , I did bind an ACCST S8R receiver to an ETHOS Tandem X20 HD Transmitter. Everything work OK , stabilization, Hover, Knife flight, but the Aileron servos acted weird, they rotate 45degrees to one direction and only approx. 22.degrees. to check this glitch I bound the S8R to a Taranis QX7 and had the same issue. Do you believe it could be a Firmware issue? Some recomendatios? Thanks Salsordo
@MrD Жыл бұрын
To be honest, it is hard to say. From my experience, the control surfaces have moved pretty evenly. My first though would be the control linkage geometry has got a lot of differential present. When neutral, is the control rod at 90 degrees to the servo horn? If you disable stabilisation, how do the surfaces act?
@reemaszero Жыл бұрын
When setting up flaperons and assigning the same channel as the ailerons, what happens if you hit “Yes” when prompted to “swap settings” at 7:04 ?
@MrD Жыл бұрын
It will swap the 2 channels over. Not something you want to do in this situation. But can be useful other times.
@swissfreek3 жыл бұрын
Man, Ethos looks pretty nice. It’s clearly the same OpenTX interface, but just spending a few minutes making it “pretty” seems to make a world of difference. Plus a touch-screen that actually looks responsive (ever tried an iX12? *gah*)…
@MrD3 жыл бұрын
It’s not quite the same. The main coder is the same guy who wrote OpenTX, so there are a lot of similarities. But also quite a few differences. Someone used to OpenTX would be caught out by a couple of things if they tried to do everything the same. But it would also be familiar enough to catch on pretty quickly. For new pilots, it is more friendly. The touch screen is nice. Probably better than it looks on the video, due to the angle I have the transmitter to record. I can’t see where I’m supposed to be touching so well. They keyboard part is awesome too. I’ve not tried an IX 12, but by that reaction I guess I wouldn’t want to 🤣
@anthonyjayakody33562 жыл бұрын
Hi Darren, I keep coming back to your vids when setting up. Really useful so thank you! How do you change the deploy speed of the flaps in the flap settings? Successfully set up flaperons on a freewing F16 and flown 10 flights with the new Frsky x20, thanks to your help. Ant
@MrD2 жыл бұрын
Hi Ant. I'm glad the video has been helpful. To change the deployment speeds, you can change the Slow Up and Slow Down parameters in the mixer or the outputs.
@anthonyjayakody33562 жыл бұрын
@@MrD thanks a lot I’m going to give this a go!
@anthonyjayakody33562 жыл бұрын
@@MrD I’m having a slight issue. As I have flaperons, Aileron 1 is in to Ch1 and Aileron 2 is in Ch7. When I change the slow down speed in the outputs menu settings, it also has an effect on the ailerons due to both flaps and ailerons functioning off Ch1 and Ch7. I can’t seem to find an option for slow down speed in the mixer menu on my flap mix. Any ideas? Thanks-Ant
@MrD2 жыл бұрын
It is a pain that not all options are in some mixes that will benefit from them. If you use a free mix, as opposed to the flaps mix. The slow should be there.
@MrD2 жыл бұрын
Sorry Anthony, your other reply seems to have been removed. Of you use a free mix for the flaperons. You can set the slow in there and is has no effect on the ailerons. I’ve just tested it and it works fine. It will only effect both controls if the slow is performed in the outputs.
@_F5X3 жыл бұрын
👍
@fastrack59 Жыл бұрын
Is there a function where expo and rates can be set? I can’t seem to locate it. Thanks.
@MrD Жыл бұрын
Rates and expo are set up in the mixes kzbin.info/www/bejne/ooe8eXaYjaZ3Z5o
@tavila722 жыл бұрын
Was wondering if you may be able to help me out? I'm running a Flysky FS-IA6B receiver with a TX16s transmitter. My FMS T28 has the ailerons and flaps wired with Y cables. How do I get my flaps to go in the same direction? It works for my ailerons but obviously not for my flaps. I will watch the video again, but any help would be appreciated. Also, I can't flip or install the servo any other way without doing some modification.
@MrD2 жыл бұрын
Hi Tomas. It depends on the servos on the plane. If they are facing the same direction (not mirrored), they should be ok with a Y lead. If not, you would need to either wire the flaps separately, use a servo reverser on one of the flaps, or open up one of the flap servos and swap some wires. I've not done the last one myself. I usually use separate connections for all 4 wing control surfaces.
@mikebell95362 жыл бұрын
Hi Darren great video how do I do flaperons with r4 receiver please
@MrD2 жыл бұрын
You can’t unfortunately, unless you don’t have a rudder. You need to use 2 channels for the ailerons.
@mikebell95362 жыл бұрын
@@MrD I’ve got ch 1 and 2 on ailerons 3 elevator 4 on rudder Darren I have a DLG glider thank you for your reply I’m on my own as the local club don’t want to know DLGs
@MrD2 жыл бұрын
@@mikebell9536 that will work then. Just follow the video and the flaperons section, using your channels 1 and 2.
@davidpenfound Жыл бұрын
how do you mix the elevator to the flaps
@MrD Жыл бұрын
I will make a video on this soon 👍🏻
@vaughnentwistle6342 жыл бұрын
Hey Mr. D.I just bought a Tandem X20 and your videos have been a God-send at the manual leaves much to be desired. However, I was wondering if you plan on showing a setup for a typical six servo glider. I've been able to figure out most things but Flight Modes/Butterfly and other glider-centric settings still have me baffled. I'm sure there are many more glider pilots in the same position as me as the radio is fairly new. Any chance of helping out us pure glider guys? REPLY
@MrD2 жыл бұрын
Hi Vaughn, glad the videos help. I've not used and don't have a 6 surface wing glider unfortunately. So it would be difficult for me to do this at the moment. For regular 4 servo wing gliders, the E-Soar transmitter models are excellent. They have calibration modes that work so well the gliders hardly ever need trim. rc-soar.com/ethos/
@stinkyfive2 жыл бұрын
@@MrD thanks for your tutorials, they’re really helping me go from OTX (which I’d half mastered) to Ethos - I do have one question though. When using a flap mix to drive ailerons up and flaps down, I run out of mixers (4) when it comes to adding elevator comp, any ideas? Cheers, Elliot.
@EnriqueIvanHoward2 жыл бұрын
Hi Darren a question in regard to Flap => Ele mix, I have a 2 second delay to deploy each postion of flaps, going up and down. How could I make the Elevators in the Flap=> Ele mix move with the same 2 second delay? I cannot find an option.
@MrD2 жыл бұрын
It looks like that mixer doesn't have the slow up or down. I would just use a Free Mix, set the source to the flaps and the output channel to the Elevator. If you set the up and down weight to 10%, it will be the same as the default for the Flap => Ele mix. I'll add a request to get slow added to Flap => Ele.
@EnriqueIvanHoward2 жыл бұрын
@@MrD Thanks. In the Flap => Ele mix I set source to flaps and it slowed down the elevator. I had a 3 point curve to set values for the elevator compensation triggered by the same switch as the flaps but when I selected the Flap as trigger source, the three point curve would not work. I changed it to a two point curve, that I think is doing the same , as if I change the curve for the weight option you describe. It would be easier if they include the delay option in the mix.
@MrD2 жыл бұрын
Yes it would definitely be easier if the speed was included in the mix. I don’t know why the curve would stop working. You would definitely want to have different movement for the different stages of the flap compensation.
@stevewood32123 жыл бұрын
I am looking to set up a throttle rudder mix. Would it be similar to this video? If not, it would be great if you could do one please?
@MrD3 жыл бұрын
There is a mix in ETHOS for Thr => Rud. This should do what you want straight away.
@stevewood32122 жыл бұрын
@@MrD Thank you. That's done the trick
@fastrack59 Жыл бұрын
ok so because of your video I was able to set up my x20 and acquired connection between the radio and receiver. All control surfaces respond but the flaps. I followed your step by step procedure and assigned flaps to switch G. Checked the output and is in fact working. Everything on the radio works fine. But flaps on my plane don't respond when I flip switch G. Connection to channel 5 is ok coz when I plug in the flaps servo the flaps move down. What do you think is the issue? Thanks.
@MrD Жыл бұрын
What receiver are you using?
@fastrack59 Жыл бұрын
@@MrD TD R10.
@MrD Жыл бұрын
That receiver can have configurable ports. It's worth checking that port 5 is outputting the signal from channel 5. I don't have one of those receivers here to test, or see what it's set to by default unfortunately. There is a section in the manual called "How to configure channel ports" which shows where to see if the Ch 5 is being output. www.frsky-rc.com/wp-content/uploads/Downloads/Manual/TD%20R10/TD%20R10%20Manual.pdf
@fastrack59 Жыл бұрын
@@MrD I’ve actually figured it out. Flaps working now. Even mixed it with elevator. Thanks so much for your usual helpful replies! 👍👍👍
@philiproyffe80222 жыл бұрын
Hi Darren , do you know if you can add retracts or a electronic ignition switch into the transmitter, I've tried has me stumped to where it is, there doesn't seem to be a channel set aside for these, thanks Philip
@MrD2 жыл бұрын
Yes, they should only need a free mix as both those things are just switches. I’m going through the ignition part myself at the moment; setting up a model for my Wots Wot XL. That doesn’t have the retracts. But does have ignition and choke.
@philiproyffe80222 жыл бұрын
@@MrD I'm sorting out a lysander and a skybolt, it's been a mission 😂😂😂😂
@MrD2 жыл бұрын
I bet. I can make a video for retracts. Its a shame I don’t have any models with separate gear servos or doors. As that could have been good for sequencing. I can also make a video on the ignition, though I’d have to demo it with a servo. I guess that part doesn’t matter so much, as you’d just see an LED anyway. I have mine so that it can be turned on independent of throttle cut. But when you cut, it kills the ignition too.
@philiproyffe80222 жыл бұрын
@@MrD I've been using a aftermarket switch hooked into the reciver, flick a switch and it kills the power to the module, works great if I can work out transmitter I've done so with a futarba transmitter, easy as
@MrD2 жыл бұрын
Sounds like a good idea. I just have a regular switch for the ignition on the plane. Power on one side, ignition on the other. But you still have to control the ignition from the transmitter. Just checked out my model again. For the ignition, I use the momentary button on the rear left of the transmitter. Pressing it turns the ignition on. Pressing again will turn it off. Switching on the throttle cut will also turn off the ignition if it is on.
@rjmonroe2 жыл бұрын
I am configuring a Tandem X20 (Ethos) with an SR10 Pro for a P-51 Mustang. The aircraft has inner gear doors for the main retracts. When the gear is lowered the doors open first, the main gear extends and the doors close. When the gear is retracted the doors open the gear comes up and the doors close. I suspect this can be done with logic and function but I don't know where to start. Can you help?
@MrD2 жыл бұрын
Hi RJ, thanks for reaching out. Sorry about the delay, but work is pretty hectic for me at the moment. To be honest with you, I've not looked in to this too much. I know there was talk of implementing a gear door sequencer on the GitHub. But, I've not seen much on this yet. I'm sure that it can be done with logic. The crazy thing is I'm sure I've seen an example on the GitHub, but couldn't find it when I had a quick look. Maybe drop me an email (via my web site) or join my Discord server (I'll put the link in the video description), and we can look further. Though please appreciate that I'm pretty pushed for time for the next few weeks.
@Thrall123RealID2 жыл бұрын
“RC gear door sequencer” might work for your P-51.
@frank-vq4mx2 жыл бұрын
Is this mix permitted when a 3 axis gyro is installed ?
@MrD2 жыл бұрын
The mix its self shouldn’t be a problem. The only times you may end up with issues is if you are using a self levelling mode. If you are too slow and stall, a self levelling mode will tend to do all the wrong things. Though this is also true without any of the flap/flaperons/spoilerons mixes. If you’re just using basic stabilisation, there shouldn’t be a problem.
@frank-vq4mx2 жыл бұрын
@@MrD Thanks So Much .1 I'm a new user to this Brand and have much to learn. Although your tutorials certainly make it much easier !!!
@umbertolindgren89803 жыл бұрын
How can i useVirtual Keyboard -in X20S/X20 .
@MrD3 жыл бұрын
It was added with firmware version 1.0.10
@MrRherzog2 жыл бұрын
yes. install a recent version in your transmitter. It has a virtual keyboard and looks and feels very nice.
@bobfin42913 жыл бұрын
THAT TX
@miksterr3 жыл бұрын
You like? I have the same (new to me) and am finding it very nice. Programming flexibility and ease with Ethos, touch & wheel interface is excellent.
@MrKenwillis2 жыл бұрын
Your videos are good but you go too fast!
@MrD2 жыл бұрын
Sorry about that Ken. It is hard to find a balance. Though I can see that one is a bit fast.