18 Inch 2 Bass Subwoofer Design - Extremely Powerful Sound For The Stage

Thanks for watching, subscribe & share!
18 Inch 2 Bass Subwoofer Design - Extremely Powerful Sound For The Stage
► Subscribe to channel:

[@OtherMike5000]

I love to watch *The Bass Master* at work.

[@hasanuddinlalot4363]

Alatnya sangat canggih, semoga sehat dan sukses tentunya 👍👍 🇮🇩🇮🇩🇮🇩🇮🇩✋✋✋

[@garyjonah22]

The sawdust and grit blown up from the floor into the paint during spraying adds great individuality to each cabinet.

[@weareallbeingwatched4602]

And grip

[@thefoambone]

These remind me of the CV Earthquake speakers. Most people have no idea how much time and money go into these builds. They look great!

[@tobyreid4800]

Exactly what I was thinking! Tho, the CV Earthquake bins were each made with 2 sheets - top and bottom - of 4'x8' plywood or MDF, and used 4x 18" CV drivers. Long ago, in Toronto, there was a club which had a pair of them, driven by Sansui and SAE P500 amps. 😎

[@joeinline4443]

Vary well done for the purpose that this enclosure was intended for loud ass outdoor type stuff or large indoor areas great job!

[@ankhuong208]

Ban đầu còn ngờ ngợ! Sau nhìn thấy anh thợ ngồi chồm hổm là biết xưởng ở VN! Vậy mà ko ai biết hết! Chúc kênh càng ngày lớn mạnh nhé! :)

[@lukove671]

this video is literally gold for me as a speaker builder and creator. So many tips and so much to learn from this video and its fun and relaxing to watch!!! Thank you so much xoxoxo 😎

[@glengatt3941]

You are right learning I was thinking of making my own subwoofers but at the same time I realized that I need tools that I don't have

[@charlescort2781]

I like the box but it,s weight am afraid of do you have measurement for the parts of this box

[@Scott924m]

itemized bill , labor 100.00 wood 150.00 electronics 200.00 STAPLES 1450.99

[@jefftiffin7675]

The build itself was really cool.

[@joseclidiomosquerasanchez5758]

Maravilloso los estilos de bafles que fabrican me gustaría que dieran las medidas

[@joseclidiomosquerasanchez5758]

Mis Respeto para estos maestros. Me gustaria que mostraran el ESKEMA para ver las medidas de los subwoofer de 18" dobles

[@rolandominayacusi7126]

Excelente maestro saludos desde lima Perú

[@jaydeebishop2345]

So THAT'S the great RCF audio factory! ;D

[@brianfretwell3886]

Sounds like The Chipmonks were doing some other work elsewhere in the shop with that speeded up audio. Also the look like the bass bins used in a local cinema in the days they had just a 10 watt amplifier when it was first converted to sound. They had renewed them but not actually got rid of the bin when it was demolished.

[@amarlubai]

wow amazing... a blend of imagination and hand skills that produce beauty.

[@RAVIKUMAR-uh2sk]

No more words .. Exhalent work ..🙏🙏🙏🙏🙏

[@adryoud6890]

Excellent travail👍

[@bennettshapiro7711]

These are cabinets without drivers or wiring. Where are the drivers? What kind of drivers are they getting? Who’s cabinet design is this? What are the end specs?

[@jeterplaysshort]

A wicked one with 18s bet it pounds like a jack hammer

[@philipellis4530]

You should be using birch ply with many more screws and corner reinforcing braces, otherwise the cabinet will fall apart or start buzzing.

[@JT-od7wq]

MADE IN CHINA

[@macrotech6507]

philip ellis, you are correct! Absolute dogshit cabinet.. Cheap knock off. Great comment!

[@ThPappas]

The thickness of the board,which takes the drivers is not enough for 18”s.

[@DjJerryofficialChannel1]

Eyeblink! You’re right, only we professionals notice the details that are missing.

[@luccallebaut4375]

100%sure..

[@johnhess351]

Excellent cabinet making skills! The materials, C&C machine time and carpentry is just a matter of spending a little money. The real world sweet spot result to calculate volume for the driver you have arrived at from experience in putting in a bunch of different club systems is requested. What are exact dimensions and what model # drivers were used?

[@cutmasterbelly]

Do you make custom turntable & mixer consoles?

[@SAJSOUND]

what are the patty ang the primer used in the paint? very nice

[@christophercarson4310]

Are these for a large venue PA system? Can you share some specs of the venue and the drivers/amps? Cheers,

[@user-sm4mp7rg1h]

สุดยอด

[@shreepadhavallabha4371]

Great work all the best

[@joselb6720]

Excellent...

[@TobyIKanoby]

Very nice build

[@hollywooddjs1]

I THINK YOU GUYS ROCK.. THE BOX IS BAD AZZ .

[@michaelrobinson9643]

I like that 45 degree jig on the saw

[@JM-im1iu]

I have a pair of 18" Lanzar Infinite Baffle Subwoofers just laying around. Could i use these in a box like this?

[@joebrooklyn5865]

Wonderful design I wish you can sell them on line . Just like the 5 foot w. Boxes.

[@marcelod.tallon9438]

Excelente!!! Gracias

[@lembunai2675]

Mantap.... 👍👍👍

[@matthewstringfield8924]

It would have been nice to see the subs wired and installed at the end.

[@mockmorrison9949]

Waitin for it too

[@rehantegar5609]

@@mockmorrison9949 oop

[@commonsense3505]

Aaaaaaww, Cant fit the speakers thru opening to mount........

[@mr.prashanth324]

Good and clear work 🇱🇰

[@gongtevi]

awesome!

[@markodimic7871]

Mantap mas bro

[@sddiymakeitworthit7512]

REALLY NICE

[@ibrahimkiama3045]

Great job, what paint do you use

[@yadhukrishna2008]

That build was epic😍

[@HimmlerAJean]

Lo mejor que hay en el mundo entero

[@eddiefernando643]

So many high tech skills and equipment also

[@JohnSmith-qi6co]

Really cool build! Now do you have any frequency response measurements to show us?

[@bilmarutha]

Geometrical design is pretty good, however the assembly work is not so much. The walls are so slim and fragile bonds between walls. I would like to make a try with solid wood and natural finishing. In short, great idea guys!

[@stevepoythress4678]

Wicked One

[@user-mo5ft1il2n]

делал саб, на двух 2А-9, КИНАПовских головках, любой корпус разрывало...крепил на болтах М8 и металлический уголок внутри, вырывало болты сквозь фанеру...

[@FebriyDiscjokey]

always success 😁

[@box0bang]

I liked the way it was routed out to be put together, but wasn't clamped very tightly before throwing those braid nails in😬

[@jimgardner5129]

Love the rooster!!

[@viniciusraubach148]

Fantástico as caixas. Mais pobre de quem vai carregar..

[@ahorayovoy]

Felicidades por este montaje, me gustaría saber que pegamento usan para cuando han echado serrin en los huecos de los tornillos y le aplican un pegamento que parece agua, me huele que puede ser cianoacrilato, pero me ha extrañado por que el ciano necesita presión o humedad para fraguar, tengo esa duda, de momento.

[@AudioElectronicsChicago]

excellent

[@saschaschulze7442]

Very good work! Greetings from Germany

[@jefftiffin7675]

I was amused by the dichotomy of a cnc and the diy track saw

[@anatolynord7781]

Отличная вещь,палец вверх и удачи.

[@thewizard7099]

Very beautiful. Very powerful.

[@erwinsoundsumedang8079]

Keren👌👍👍👍

[@toddpeggs1445]

Hello, is there a way to get the complete blueprints for DIY building this sub? Blueprints for the DIY box and hardware? Please!!! Thank you !

[@endykubes1041]

Hello , what is that liquid and black thing you use for covering the holes? Thank you.

[@wahyuddin.thosarana9401]

Hadir bang

[@HarmonicResearch]

The 18" drivers will probably go down to 20Hz, but the port lengths are too short to reinforce anything below 60? Hz. You will get 2 very loud bumps in the frequency response curve with this design due to the 2 different short port lengths. They will be where most of the low frequency music is from 60 to 120 Hz, but will have a hard time with the lowest notes. That's probably good for a large music reinforcement hall where you could bring down a building and over stress an amplifier with the lowest notes from such a large system.

[@svensplooge9961]

Should have just put 1 18 in a 4th order and the other 18 in a 6th order bandpass and call it good

[@HarmonicResearch]

@@svensplooge9961 That could get you some good bumps in the response!

[@svensplooge9961]

@@HarmonicResearch I agree lol. I made a 4th order for my 15 inch Rockford Fosgate p3 and it hammered the lows like no other flexed my doors and bumper lol. I made it so the port was adjustable too so u could push it a big further in for those ultra lows. I wanted to make 1 for my 18 inch skar zvx but it would have been over 7.5 cubes n would have been a bit ridiculous it already shattered my drivers side window so I had to sell it it pissed me off so bad lol I regret it now so ill b buying 2 18s next time with 2 rp1500.1dm skar marine amps.

[@damon20r]

If you look at the specs on the speaker terminal plate it says 300watt RMS and a frequency response of 65hz to 20khz.

[@eustahijelifetips]

Those are woofers, not subwoofers, classic 6th order but tuned higher, and they will cover a large frequency range but not a low one, they have their uses, pair that box with two monitors that will cover the higher frequencies and it should get pretty loud

[@jimgardner5129]

So is this the piece of equipment that every woodworker needs now? You'd have to build a second shop just to house it.

[@kiddx2]

How in the world does that single baffle design support a quality 18 inch sub? This does not look like it would support 2 good speakers for very long.

[@ILHAMELEKTRONIK]

madura nyimak lagi

[@rickjames8943]

You guys must use smaller 18 because a single wall 3/4 won’t hold a real 18 we normally do three layers and they still destroy the box that and ours 18 subs weigh about 200 lbs or 90 kilograms

[@TIMEtoRIDE900]

Yeah - and particle board laying around with no air conditioning in sweltering jungle conditions . . . . DISSOLVE !!

[@uhuburu4515]

Come on guys, these giys come from India......paint it and they're done ;-)

[@wonderors]

This box isn't made for your inefficient sub.

[@Theworldofsound.]

Good job

[@joseluismirandagenis105]

felicidades se ve genial la construcción de esa caja, seria bueno que subieran algún vídeo para ver que tal suena su acústica!! SALUDOS DESDE ATLIXCO PUEBLA MEXICO

[@marcelogastonmanulak5075]

Increíble!!! Medidas por favor???

[@AmitKumar-xu2jd]

S

[@adecjrchanel4802]

Mantap bagus aq suka bossqu👍👍👍

[@ElGunsulecianjurpakidulan]

Amaezink.

[@shimronnetia]

there was a Rooster crowing in the background.. 😂 exceptional work

[@hyphen2612]

Looks like they've been custom building cabs for a while. Do they have contact info or something? I might have a project for them.

[@djrupya9670]

Make A Video with same cabinet but also speakers loaded please...❤️

[@WisisiDjPartyJ_one1041]

Best design 😍😍❤💪🏽

[@12savagess]

verry good work...

[@denniaudio6688]

Box nya keren

[@chrsity9760]

cuando tenia 14 años , fabricaba cajas acusticas , podrias decirme que parlantes pondras , su resonancia , presion sonora , cantidad de litros de aire?

[@Kostya_rigalovich]

Oooooowwww) Wow !!! ))) Well almost great FUNKTION-ONE 😅🤭😊

[@senriti_Dear]

nice .. good assambeling with a lot of knowledge about wood ..painting in 2 stps very good thinking love this job . strong housings everything nice and useful. not enough for european market but let us talk about little changeins other effective housings line arrays an a few things . if prices can be comared to everything we should get buissnes parners

[@darminlsp2284]

Salam kenal boss. Saya Darmin rental sound dari Indonesia Mau tanya apa saya bisa beli panel dudukan spikon yg sudah ada merk RCF atau produk NEXO.

[@jackravan3242]

Looks like a decware wicked one. Or a derivative thereof?

[@iisreallughtkingsun4360]

REAL good work's bro ✌✌👍👍

[@selectorerwin1don12]

Hey guys what's the name of the metal fitting that is being placed where the speaker box handle will be

[@joshuaghiotto9688]

what is the benefit of this box vs a regular bass reflex box. is there a significant gain

[@arsnlin]

Nothing. Also with improper dimensions, you will get peaks and dips in the frequency response. In short, unless you use proper design, this is just a fancy box.

[@cozmic2498]

Theres gonna be some serious I's and V's coming outta the bass at the next quinceanera. lol

[@ademiltoncordeiro1867]

Perfeito 👏👏👏👏👌

[@rviadstv4930]

sir, can i have a plan of your angle cutting jig..

[@jimgardner5129]

Yeah that angle jig is smart.

[@cabrant6096]

Why the table saw and routing? The cnc would have done all of that before you took it off the table. Doesn't make sense

[@user-qr9jy3ge1w]

I just love it

[@ChandanaprageethRathnaya-er6cs]

Good job brother. Congratulations. Please how to make this black paint.and make a new video how to make paint. Please.

[@luckystriker7489]

I like it, but I have to tell you, if I had made this in high school my woodwork teacher would have failed me. No joints, sloppy glue and nail work. He would have given me an F for sure

[@TravisTy2cMe]

unless you built one for his truck also... then you would have the golden ticket so to speak... lol

[@RandoManFPV]

What is the advantage of flaring the end of the port like that? It obviously isn't about port noise chuffing, is it about widening the soundstage? How do you think this would work with a car audio enclosure in a car? Bad idea?

[@mikuidavid407]

Good

[@sascha5668]

Cooles Teil. Nur wie ihr mir den Werkzeug umgeht teilweise ist jenseits von gut und böse. Kaufen sich eine cnc Fräse aber nutzen die billigste oberfräse und jagen die durchs holz ohne anzuhalten wenn der Motor kaum noch dreht. Mit Gefühl. Dann reißen die Kanten nicht so sehr aus und ihr müsst weniger Spachteln.

[@laebdangrs4274]

Where is the old man ?! I no longer see him on this channel ... !!! Did anything happen to him ?!

[@katunogmhandyparagua97]

Nice design..,❤️❤️❤️

[@artysanmobile]

No way a 3/4” baffle for any 18” driver I’m aware of. I went with 1.5” and I’m fairly certain I’ve heard those baffles get loose. Your man is an ace with the nail gun.

[@matthemberry]

Pro audio. These drivers don't have the excursion a car audio woofer would. It's also heavily braced.

[@luisar4888]

It can be, I have this kind using 3/4 and still working since 5 years ago until now,,

[@ehinostroza]

Your designs are clever. Also, you are very good at finishes and building. I'm not a fan of using nails, specially on a box that large. Screws and corner reinforcements would help. Some clamps would be good too in order to assure that the joints are properly seated with no leaks, and the walls seem too thin for such a driver/power handling, even with the reinforcements. For a parallel bandpass, the box volume and the port lenght in relation to the port area seem to short for low bass on an 18 inch driver, so yo can expect a very narrow bandwidth and high frequencies. I would expect around 80 to 120 hertz on the lower response and maybe aroud 300 on the higher, depending on the driver. If you are planning to install the driver on the back of the wall, check for leaks.

[@jasonwhite8722]

wood glue Yes.. Brqd nails Maybe a few to support the work .. But id use Drywallscrews .. if used with a screw gun thell go in fast with out over sinking and hold the wood much tighter with out spliting it .. which will futher strengthen the glue bond \

[@jasonwhite8722]

also fpr the filler just ,mix the saw dust with wood glue run it over the screws with a putty knife