Amazing Steam Engine Pop Pop

[@nilosaldana5874]

Tengo 70 años y cuando tenia unos 9 o 10 años me habian regalado un barquito a vapor como este u nos pasabamos horas en los charcos de agua del barrio jugando con ellos, una infancia creativa que teniamos en aquellos tiempos !!!!

[@kayysean99]

Nice job. I’ve seen a small steam boat as a kid which moves using this engine. So basically this same engine is mounted inside a ship “body “ which is designed to go in a circle as long as the fire is on. Was a fun toy! 😁

[@MrGamb]

Nice! thanks for the comment!

[@arsenijearsen3041]

​@@MrGamb did you put water in pipes and if you do how much water "half or more or less". Sorry for my english.

[@peteheymes259]

every second you show is delicious 'engineering' it is crowned with the proof of opping sound-in water at the End (happy end😅) Thank You

[@alargao]

I've seen several videos of hand made pop pop boats and yours si the most beatiful one 👍🏻

[@MrGamb]

Thank you very much!

[@shannshannist]

Now I can make the cute boat from Ponyo!!!

[@ahmadmubasyir5853]

❤❤ pencetnya berapaan mesinnya❤❤

[@1islam1]

​@@ahmadmubasyir5853⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

[@1islam1]

​@@ahmadmubasyir5853⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran

[@PedroMoralesRuerte]

Parabéns 👏👏👏isso fez lembrar quando eu era criança , tinha um barquinho desse era vendidos em lojas, usava algodão humedecido em álcool quando aquecia a água criava vapor e começava a andar muito bacana esse vídeo, vou fazer um para p meu neto.

[@vivianepoczenek119]

Good job! Congratulations on your dedication and commitment!

[@MrGamb]

Thank you very much!

[@davidbwa]

The paint can bottom for the dome is a good idea.

[@nelqui7685]

Uma engenharia Simples mais altamente criativa . Até o barulhinho lembra um motor a diesel de um barquinho 😅 cheguei aqui pelo outro vídeo do barquinho de sardinha 😊 Congratulations keep up the good work .👌🇧🇷

[@MrGamb]

valeu irmão!

[@orlandoherrera2526]

Increíble. Lo felicito. Saludos desde la Patagonia Argentina.

[@Jeff-jg7jh]

The vice pipe bender was a veryh clever idea and one will use.

[@suryapatnaik5720]

I thought we put water through copper pipes into that round container, which we heat with candle to produce steam, which runs the boat.

[@valterleao2798]

Simplesmente…, fascinante, nem sei mais o que falar 😮 Abraço aqui do Brasil 🇧🇷

[@eduardo7-7-7]

O mano do vídeo é brasa

[@MrGamb]

Obrigado Amigo! abraço...rs idem

[@victoryfirst2878]

I like your ideas Mr. Gamb.

[@DaJhowwik]

Give this guy a freaking oscar

[@draganjovanovic7104]

Absolutamente Genijal 😃

[@williamokrasinski9840]

Mr.Gamb. I hope you might reply. I think of all the videos on pop pop boilers, this is the best. I've watched many but no one is talking about the angle of the boiler. How did you arrive at the tipped up design rather than flat. One other thing no one mentions is metal prep to remove varnish. I've encountered this and takes awhile. I also thought of soldering the disc inside the boiler as yours, but am going to attempt to solder it on the flat edge of the can first. Sorry for length of post. It looks like you're using 5/16" tubing, does diameter matter ?

[@MrGamb]

the inclination of the boiler has to do with the accumulation of steam in the highest part! and also to facilitate the release of excess heat from the flame, which in my case could melt the solder on the tube, tin is not a good option for this! but if you don't leave a very strong flame it works! I used 5/16"! For the size of the boiler, I think it's the most appropriate measure! I don't have much knowledge on the subject... I hope I helped! Thanks for the comment! Hugs...

[@williamokrasinski9840]

@@MrGamb Thanks for the reply. My experiment only worked briefly until the solder blew out near the flame. Plus the .006" (.1524 mm) thick lid wasn't flexible enough to pop. I'm trying to figure some way to lock in a soda can Aluminum top inside the ring of the boiler. It's becoming somewhat harder to construct this design than many videos show. I haven't tried Silver solder, but heat required may deform everything. Still trying. Thanks again.

[@rogerlemagnifique7415]

@@MrGamb I built it many years ago, but now I realize why mine didn't sound, I'll try one more time, thank you Mr.

[@rasvan55]

@@MrGamb - ”the inclination of the boiler has to do with the accumulation of steam in the highest part”, but the protruding ends of the pipes should be there too, otherwise the water would be thrown out also, hence the inclination of the boiler should be the opposite way. Nice idea, anyway! What about using lighter pipes and with nozzles, to increase the speed of the steam, the inner pressure, the temperature of the steam and the energy of the jet?

[@rasvan55]

You can hammer the outer ends of pipes around a needle to get nozzles, then you can load water with a syringe.

[@tomaszwilgosiewicz1885]

Great idea !!!👍

[@clovismarquesdossantos9227]

Todas crianças dos anos 60 já tinham estes bar os vendidos pela Estrela,isto só é uma lembrança não é novidade .somente que na época usava algodão em álcool.vela é mais seguro.

[@JoseAugusto-bj1sf]

NOS ANOS 1958, NOS MEUS 13 ANOS, CONSTRUI DESSES BARQUINHOS DE BRINQUEDO, NA EPOCA, TUDO FIXADO POR DOBRAS E REBITAGEM, NÃO TINHA A FACILIDADE DAS SOLDAS, DIA DESTES, MEU MANO NASCIDO EM 19951, LEMBRAVA DESSES MEUS BRINQUEDOS FUNCIONANDO A FOGO, COM RUIDO DE MOTOR DE POPA, MUITO BONS TEMPOS, CONSTRUI MUITOS BRINQUEDOS.

[@JoseAugusto-bj1sf]

MANO NASCIDO EM 1951.

[@AlejandroMartinez-fb8tt]

Super engine!

[@theadventuresofmyhamster8465]

Good Job my dear friend!!!!! Awesome!!!!

[@MrGamb]

Thank you very much!

[@reynaldoquirozquiroga5900]

Pregunta. Cuando se suelda con estaño no se derrite la soldadura con el calor de la llama de la vela.

[@MrGamb]

¡Hola amigo! si el calor es muy intenso se derrite si!

[@wekshin]

Шедеврально!!!

[@DanRyan-pq2ov]

Cool. Thanks : )

[@josecarlospoggian149]

Spectacular Thanks a lot 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

[@MrGamb]

👍

[@stargazer279]

well done!

[@mayasmith3332]

Incredible 🙀

[@MrGamb]

Thank you very much!!

[@kenzmatt221]

Nice. How about if we use 2 set of motor? Does it sound like a harley davidson?

[@MrGamb]

Great idea! I will think about it. 😉

[@kenzmatt221]

@@MrGamb Thanks. I should subscribe for your next videos 👍

[@robatlarge3478]

Yeah with no exhaust. Seriously a Harley with no exhaust is loud and almost bubbly sounding.

[@jerrodlopes186]

Thank you!

[@kaeiid3852]

Can this method actually work if one is trying to build a realistic pop pop boat that can fit 2 people?

[@MrGamb]

Hi! I don't know if this can be replicated on a larger scale! Would have to try!

[@arnoldtm31]

you can't. The thermal efficiency is very low. The heat on a larger scale will have to be extreme for it to work. Even if you manage the heat somehow, the cost of fuel will be prohibitive.

[@kaeiid3852]

@@arnoldtm31 oh, alright. Thank you for the info.

[@ayahtiri2293]

Nice Sir 😁👍🏻

[@elielgoncalveslouro9684]

Agora sim ficou bem mais top com o motor feito

[@AstRoKiD_]

Nah , Amazing work .

[@estelapechefist8652]

Дуже креативно, вітаю! 👏👏👏👏🤩🤩🤩🤩

[@MrGamb]

Велике спасибі!

[@mnlightsnow]

Ponyo and Sosuke joined the chat...

[@orangmiskin9768]

indonesia 1992 here :V i calling boat klotok klotok

[@richardCudden]

Amazing gonna do this. What is the Diameter of the copper pipe?

[@joel6221]

what kind of stand is that for the Dremel tool?

[@RyszardSiem17zw]

Czy to robi się z puszki z materiału fe czy Al?

[@MrGamb]

fe

[@mariaivetep.tondello9180]

👏👏👏🔝

[@mohammedwreikat2568]

Can blades be installed in the holes for thrust after that explanation?

[@MrGamb]

I don't understand friend!

[@m_a_c_n_i_c8309]

great video, but what material did you use to weld? Is it just tin??

[@MrGamb]

Yes!

[@cavecavecavecave5295]

That's how the USS Enterprise was made.

[@MrGamb]

🤣🤣🤣

[@mrBDeye]

Captain Kirk: Engines at full speed. Scotty: We can’t go any faster. Spock: Interesting indeed.

[@willdiesel3909]

Excelente.

[@normanwray1341]

You can kill time with that great.

[@hexdude24]

The fire might be hot enough to melt the solder. What is your experience with that?

[@MrGamb]

Hi! The water vapor doesn't get too hot! But if the fire is excessive this can be a problem! I had this problem!

[@rogerlemagnifique7415]

@@MrGamb No if you use the solder that plumbers use 50 or 90, it is easier to weld with the torch.

[@Ataim_]

What is the the flat circle made of?

[@MrGamb]

I used a piece of lubricant spray can

[@jasonbrown7258]

I thought about making one out of the bottom of a propane tank and the top of a 55 gallon drum and put it on a small fishing boat and ride it around.

[@MrGamb]

dude...try it, I hope it works!👍

[@boomstick4054]

Maybe add a sound damper to the top. Definitely will be loud.

[@747_m5]

What glue do your recommend using? I don’t have a metal welding machine.

[@MrGamb]

epoxy glue

[@diegosilang4823]

There is no machine involved. You can buy a cheap soldering iron for $30 or a better model from Hakko for $75. You need flux and soldering tin and they are fairly cheap to buy.

[@Cheez-Itz_Christ]

@@diegosilang4823 I made one out of a pencil once, and it worked surprisingly well

[@senatorjosephmccarthy2720]

@@MrGamb , heat releases most types of glue. Epoxy might or might not hold during heating from the candle. Thank you for the instructions.

[@pulpfiction6207]

🙏👌👍👍

[@ВиталийХодырев-щ1х]

Такой двигатель в старом журнале юный техник видел

[@our_Petersburg]

Как он работает ? Ведь система замкнутая, откуда двигатель берет воздух?

[@Endrus_]

@@our_Petersburg Там нет воздуха, он работает на воде - сначала в установку заливается вода, потом её нагревают.. Вода при нагреве расширяется, - и выходит через край трубки, а с другой трубки соответственно засасывается холодная вода, объём уменьшается и так по кругу...

[@vrvvrv848]

Muito bons teus vídeos. Vi que os rótulos são brasileiros. De onde você é, amigo?

[@MrGamb]

Obrigado! sou do PR

[@sergiomp95]

Hola. disculpe, ¿cuál es el diámtro del tubo de cobre que utilizas? saludos

[@MrGamb]

¡Hola! ¡lo siento por el retraso en la respuesta! usé el de 6mm

[@MrGamb]

1/4 de pulgada!

[@sergiomp95]

@@MrGamb gracias amigo, las latas son de acero verdad ?

[@diycementdesign9111]

spectacular...

[@MrGamb]

Thank you very much!

[@arturoivangarciarojas4469]

what kind of tin did you use???

[@MrGamb]

regular spray can

[@shesolohe2043]

Will the lead melt when we heat for long time??

[@Yash-yd3wm]

Yes bro because of it is soldering wire it will be melted if used for long time

[@MrGamb]

if the flame is strong it can happen!

[@sapto683]

Amazing steam engine for put put boat

[@guillermocortes7854]

Alguien sabe por que la soldadura de estaño no se funde con la mecha de parafina?

[@rogerlemagnifique7415]

Por el agua y porque el calor no es suficiente, aparte aun sin agua necesitaria un poco de pasta para soldar, intenta soldar sin pasta y veras.

[@guillermocortes7854]

@@rogerlemagnifique7415 gracias por tu aportación, bendiciones

[@carlosalbertodalbem2755]

Por estar em contato com a agua

[@guillermocortes7854]

@@carlosalbertodalbem2755 bien gracias y bendiciones

[@alexleon619]

👍👍👍

[@TROY-ms9gz]

Is it necessary to use copper pipe only ?

[@stclairstclair]

It's cheap and easy to solder, but you can use brass(hard to bend) or aluminum (hard to solder) or steel brake line(too heavy)

[@MrGamb]

Hi! As the friend said, it is the best material to use!

[@jzjzjzj]

No but copper is soft and pliable and easy to bend you can use other pipe if you can bend itt

[@silliestduffer]

I'm trying to build on of these, and for the life of me I cannot get the aluminum and copper to solder. The solder just floats on top and never sticks, no matter how hot I get the metal. Can anyone offer any advice?

[@MrGamb]

You need to use a soldering flux and the correct materials.

[@валерийзубров-ш8л]

Класс.

[@armaky4962]

Uma calderinha ou alguma coisa parecida com o motores stirlings ? Pequena no meu ver ! poderia dar mais detalhes do funcionamento não é ?

[@MrGamb]

não tenho muitos conhecimentos em fisíca, mas creio que quando a água aquece forma vapor, empurrando um pequeno fluxo pra fora, nesse momento forma - se uma pequena pressão negativa, puxando água para seu interior que vai aquecer gerar pressão positiva! Isso vai se alternado onde o fluxo de expulsão é um pouco maior que o de admissão, o empurrando para frente. Espero ter ajudado!

[@darrinmowrey4055]

Bro has a whole engine dyno for a steam engine lol

[@Фунт-й1н]

👌

[@montanatony-tl5ic]

Amazin....

[@shashidharmurthy2226]

But the heat of the candle will melt down the solderings & the steam leaks😅

[@chaitanyak9626]

Supper sir ur video

[@ichacha1546]

Sound like a honda

[@alvarocine]

Que es lo que pone en el pincel antes de soldar con estaño?

[@MrGamb]

pasta de soldadura de estaño

[@FUNKBOOGIE1]

Mr. Game ? I like to see if a human can ride a larger size steam pop pop engine boat using the bottom part of a 42 gallon barrel, big copper pipes, automotive sheet metal with a small fishing boat for 2-4 people.

[@MrGamb]

I imagine it would be pretty cool!👍

[@stclairstclair]

LQQK up a propane powered Pulse-jet, It is the progression of this idea.

[@yams5240]

funciona com lata de coca cola?

[@MrGamb]

Sim! Mas teria que usar algum tipo de cola! O estanho não adere no alumínio!

[@pratikbhagat1731]

which metal for welding

[@MrGamb]

I used tin!

[@senatorjosephmccarthy2720]

That is not welding. It is soldering.

[@pratikbhagat1731]

@@senatorjosephmccarthy2720 ok.

[@amarillosantero5586]

Claro que si..🚤

[@thealchemist9025]

you better hope those are not your mom's sewing scissors

[@MrGamb]

😁

[@blackmetal2847]

Ho provato e seguito le istruzioni, ma non funziona :-(

[@tsabitkaindra3946]

Anda terlalu niat bambang

[@ahmadmubasyir5853]

Yang mesinnya berapaan

[@ChristainYirchott]

Ponyoooooo!!!

[@stclairstclair]

You really need to put an explosion warning over the part where you cut open a can with propellant with a grinding wheel cutter!

[@stclairstclair]

Ha Ha, @ 0:35 you can see the explosion warning label on the can!!!!!!!

[@Mark017m]

Yeah, I noticed that too.

[@AstRoKiD_]

Yu call that a weld ?!

[@RichardForster-gu1ww]

Dont forget to use mom's dressmaking scissors, she will be so happy to help out.

[@JCGible]

🙂

[@BURZUMY3ah]

Indonesians:OTOK OTOK. ASHIAPP

[@porsche944ct]

Song at end plz

[@arkanaraizell7805]

Perahu otok otok versi luar negeri

[@pakchoiri783]

Pop Pop Steam Engine ..it call java Children ,Tok Kotok...name

[@jagdish2480]

sanjay

[@fourfortyroadrunner6701]

By the way this is NOT proper solder technique

[@genaroazcatlizcua3508]

Q pegamento le hechas

[@MrGamb]

estaño

[@ziyodbekturonov7704]

Нима у узи

[@amarillosantero5586]

🚤

[@जयगुरुदेव-य3ख]

DON'T FORCE VIEWERS TO WATCH YOUR SLOW MOTION @ 2X SPEED

[@alejanseicientos456]

Como siempre: es imposible de hacer en la realidad y además no funciona.

[@norbertharenz]

👍👍