How To Fix A Vibration Issue On A Stihl Trimmer Pole

Tired of your hands being shaken to death by vibration from your Stihl trimmer pole well here's How to fix it super simple but make a huge difference. it is also applicable to all Stihl kombi attachments and pole plus most over manufactures of a strimmer, weed eater, weed wakers, line trimmers, grass strimmer and long reach hedge trimmers.
//PRODUCTS MENTIONED:
Muc-Off Bio Degreaser - amzn.to/31jtu1m
WD-40 Original Spray Can 600ml - amzn.to/3kmk51N
WD-40 Specialist, White Lithium Grease - amzn.to/3fB3gwH
//OTHER REVIEWS:
Bosch AXT Rapid 2200W Electric Shredder - • Bosch AXT Rapid 2200W ...
FELCO Model 2 Secateurs - • FELCO 2 FULL REVIEW: T...
Stihl HSA 94 T - • Stihl HSA 94 T First I...
www.stihl.co.u...
//CAMERA GEAR USED:
Main camera - amzn.to/36Pho4w
B-roll camera - amzn.to/2IdwRkO
Lights -
Tripod -
Mic - amzn.to/30OOca6
Don't forget to subscribe for more reviews on gardening tools.
DISCLAIMER: The links included in this description might be affiliate links. If you purchase a product using the links provide I may receive a small commission. There is no additional charge to you. thank you for your support.
#stihl#strimmer#toolrepair

[@robhoffman510]

Worked Great, Thanks!!!

[@ecurrey7723]

Thanks from Mickleton, NJ, USA. You’re great for making these videos

[@MrGardener18]

Glad I could help.

[@dusanboss7749]

"Thanks" from Serbia, but here we don't strive to fix something by spraying WD-40 on it. IMHO usually doesn't work or works for very limited amount of time. Greetings!

[@jurajmanduch7]

I have Stihl FS56. I added soft material on handle today and I will try this tomorrow. I hope it will help.

[@MrGardener18]

I was amazed at the difference it made. I hope it works for you.

[@Sydney-Ghumo]

I have an FS66 too and had excessive vibration this last time I used it. Will try this tomorrow and see if this works.

[@TheCountryCottageGardener]

Super video, very informative. Thanks guys 👍👍 I might do the same on mine just as a cause.

[@MrGardener18]

thanks, I was amazed at the difference it made and I haven't seen any videos or information on it so I thought I share it.

[@sharkshark901]

Mine its new and at first it was OK but now I notice a shake idk if I should put greas or take it to them it's a week used any suggestions

[@y9art]

A very late response to your video, I bought a Stihl 135R string strimmer about 12 months ago, I used the string head without any problems when I noticed the circular scissor head, it looked good and more precise where strimming near delicate items. on the Stihl site it seems to be only suitable for the Combi setup, I made some inquiries with Stihl who were vague when I asked about fitting one to my straight shaft 135, I asked a couple of dealers one in the USA and a UK dealer who assured me it would fit and work, so for being helpful I ordered the item from the UK dealer as a reward for taking the time to help me out with information. I was wondering if you could give me an update regarding the vibration cure, as is it still vibration free ? my first lengthy session resulted in a severe cramping/vibration in my left arm, I first thought I was having one of those old age problems ! happily not :-) I gave it a good greasing and subsequent sessions have not caused the issue.

[@MrGardener18]

I can't say I've had any experience with using the tool mentioned. But it certainly shouldn't be shaking you to pieces.

[@archangeloftampa7]

Thank You!

[@fujinoyamicchan]

Thank you for your information, my FS 26rc it's same as FS94R but no greasing bolt, I change inner shaft grease to new STIHL heavy duty grease and stop vibration. Also I use small cheep syringe inject into 4CC from shaft hole of gear head and no noise now.

[@MrGardener18]

nice idea thanks for sharing it.

[@fujinoyamicchan]

@@MrGardener18 please make upload youtube when you greasing gear head from inner shaft hole.

[@kevinsitzes711]

Great video and info keep them coming! Thanks

[@MrGardener18]

glad it was helpful atb.

[@uklawncare8505]

Nice job mate.

[@HoopersGardenMaintenance]

Great video👍🏼

[@jakeknelsen2318]

My engine shakes..

[@sharkshark901]

What was the Problem?

[@alexmayers4583]

I have a fs131 lately getting vibrations in the shaft and the machine is making a ringing sound like a bell

[@MrGardener18]

If the ringing noise is coming from the engine end of the shaft it's most likely coming from where the shaft meets the engine unite. there is a metal disc that can make a ringing noise. it not normally a problem but might be worth checking that the shaft and disc are spinning true.

[@dennisibias8004]

is it a stihl fc75? can you please share the.piston thickness?

[@MrGardener18]

the strimmer head in the video is the Stihl KM-FS strimmer head for the kombie system. I hops this helps.

[@hernandez660r]

cool thx

[@paulstubbs7933]

Mine has a whining noise that goes away when full throttle but anything less than half throttle it whines rather loud(to me). Anyone know a solution for that?

[@MrGardener18]

it hard to say. it could be the strimmer head or shaft are not greased enough or over greased. over greased gearboxes can make a whining noise.

[@jasongardener3425]

👌👍

[@zingodingo2816]

Actually re-greasing it is good. WD-40 isn't grease...it's barely a lubricant.

[@MrGardener18]

yes, standard WD-40 isn't grease. that's why I used WD-40 lithium grease which is lighter than conventional grease but still offers good lubrication. I hope that clears it up for you.

[@1CharlieEcho]

A greased like is quite irresistible. I see you were struggling not to touch it. 😊😵‍💫

[@edwardgrit3074]

The background music distracts more than adds to this. Great video otherwise.

[@MrGardener18]

thanks for the feedback im glad you found it useful.

[@Mr26464]

Agreed, the music was really irritating. But the info was very useful. Glad I suffered thru the music lol

[@petercleary1000]

Loose the music

[@sharkshark901]

I'm totally disappointed with sthil because I shouldn't bring dealing with this .. its new and there no need for me to put my hands in ..im just gonna take back to the dealer and see what they recommend

[@alexmayers4583]

When im running machine its losing power as well and shutting down

[@MrGardener18]

It could be a number of things but the most likey is the carb. The first thing i would do is give the carb a clean with carb cleaner that sometime dose the job if not you may have to replace it. its also worth checking the spark arrester on the exshust which can get blocked and stop it running properly. i hope these suggestion help.

[@alexmayers4583]

Thank you were i live in barbados these parts are expensive so im hoping this works

[@zingodingo2816]

The simplest thing to try is remove the spark arrestor and clean it well...maybe soak it in some kind of solvent overnight (gas/petrol might do it). Then take a wire brush to it....open up that screen.

[@BakioBlack]

Why add such stupid background music?

[@ArnodJ]

The best tip is buy a husqvarna 😂✌🏻

[@MrGardener18]

It still applies to husquvarna