How To Build A Table Saw Using Circular Saw || DIY Table Saw

[@mikashadewa]

Mantap meja potongnya 👍🏼👍🏼👍🏼

[@karya_mandar99]

keren kawan insfiratif kereatif the best

[@MrHWoodworking]

Thank you!

[@jayempress4203]

It's a complicated build,, but it's a full fledged contractor's saw!

[@manuelsantamarialamborena9208]

Excelente trabajo, por primera vez veo muntar sistema de seguridad anti pinzamiento o latigazoz. Felicidades por tu excelente trabajo

[@rayhughes8240]

Great design. I have the same model saw so I followed your build but I'm not sure how you lock the motor to change the blade. I have thought about a 3mm hole from the rear to push a rod through to engage the lock. how do you lock the motor, please?

[@didd.project5731]

For a good diy table saw,we must have a good table saw.

[@francisco-kb7mv]

It is Nice.

[@2sumu]

17:09

[@jagabriel1958]

Como chama aquela peça laranjada que aparece na ponta da furadeira/parafusadeira ?

[@peteraponte6420]

Great job! What diameter is the threaded rod and flange you used for tilting?

[@MrHWoodworking]

I use m12 threaded rod sir. Thank you for watching!

[@peteraponte6420]

@@MrHWoodworking Thank you for responding! 🙂

[@koendebelie197]

Very interesting build! What is the name of the tool you used at the 5:04 mark to raise and lower the blade?

[@MrHWoodworking]

It's a navigation tool for hand drill. Thanks you for watching!

[@anynomous2024]

The blade looks bigger than 7 1/4. What size is the blade you have?

[@MrHWoodworking]

I use a 10" blade. It's a bit bigger than usual, hope it's fine. Thank you for your attention!

[@jasonjefferson6596]

That orange shape catcher thing is so cool. What’s it called?..also what liquid are you squirting on the hinges and wood area? 🍻

[@MrHWoodworking]

It's called a copy tool, I bought it online. And the other liquid is a quick-drying glue. Thanks for watching!

[@flxjay8985]

A nice exercise but I think the cost of parts and time spent do not justify the effort. Not to say that you used quality tools, even a table saw (?😊) to build this.

[@lokalbredstudios]

man im from the tropics Trinidad to be exact, where im i gonna get those parts?

[@waltermedinasalas6409]

¿Qué ue calibre tiene ese playwood?

[@MrHWoodworking]

I used 1.5 and 1.8 cm plywood. Thank you for watching!

[@waltermedinasalas6409]

@@MrHWoodworking Gracias, gran trabajo.

[@Xyntax]

may i ask what makita model circular you used to this build?

[@MrHWoodworking]

I use makita N5900B 230mm circular saw,power 2000W,speed 4100 rpm and replace it with a 250 mm blade Thanks for watching!

[@phamdung2129]

Gỗ ép bác mua chỗ nào vậy

[@MrHWoodworking]

Một số cửa hàng vật liệu đều có bán...

[@marsali8965]

wats that crack?

[@PunkR0ckz09]

Please give credit to the original maker of this tablesaw. You have the same exact features as him, the same type of bearing at the same place, the same 90 degree drill adapter concept, etc.

[@PunkR0ckz09]

and yes, I'm talking about Cosmos, the green and red tablesaw.

[@TrayDyer38]

Holy shit I’m totally into it, but my ADHD says that this is way over my pay grade to try to make… too many steps

[@damianjaime8087]

super preligroso. Un asco.

[@HabibMail-t7q]

Tidak boleh di contoh banyak yang mahu di buat