DIY French knitting machine | Yarn knitting machine

[@kevinavillain4616]

When I was about five I got an Erector Set similar to able to build many projects not quite as complicated as that. Absolutely my favorite toy if I may use that word. If I would have had a 3D printer 60 years ago oh my god look out world. I am so glad to see youth (under 65) using all the creative freedom they have now. Figure out a sales angle and make $1000000 selling friendship bracelets custom-made with the other person's hair in the center or something like that?

[@tubarne]

Hi mr inn nicely worked, but it looks like the green yarn is spun the other way towards the red, so the red one gets more twisted and the green looser in the process. And if you look in slow mo, the green is a little looser at the needles So try with two reds and see what happens.

[@hamjudo]

That is a cool design. Suggestion: Whenever the yarn gets too loose, too tight, or when one strand is significantly looser than the other, the yarn will get tangled. Add adjustable mechanisms to individually control the tension of each strand of yarn. The coil springs that guide the yarn into the needles probably influence the tension, but they don't appear to be easily adjustable. Note that I have no experience with yarn or string tension. My only experience is with a DIY mechanism that controls the tension of 8mm rope using a 5kg counterweight. That took many tries to get working consistently.

[@MrInnovative]

thanks for the suggestions...

[@janetmorris6792]

You need to run the yarn through a resistance pad to add tension while knitting ( on the Feed side) and add a coiler drum underneath so that will add tension on the outgoing and to the needles whilst knitting, Just study how a hand knitting machine works and you will see how tension is achieved, if you saw one of the little hand crank machine used to produce this item you will see they add a weight to the outgoing, Hope this helps

[@wanglydiaplt]

This is really wonderful!! What a great school project too! Maybe you could do a braiding machine next, with more spindles?

[@diyathomevn]

*_Better and much more beautiful than new!! Good job_*

[@metamud8686]

0:36 dangling (loose?) rubber band bottom left. Something broke / sprung loose?

[@alexxustube]

Your inventions are incredible! Respect! 👍👍👍

[@fra2025]

Wow. Are u a mechanical eng?

[@MuhammadyusufK]

can you modify the machine to insulate cables from heat like in irons?

[@marknahabedian1803]

This is really cool. It looks like there's a problem with the yarn slacking up as it comes off the cone spools. The yarn that is currently on top going across the top of the machine will temporarily be pulled tighter and the one across the bottom temporarily looser. The simplest thing to try would be to cross them in the middle so the one on top at the spool end is on the bottom at the knitting end. I don't know if that will be enough, but it is easy to try. Does the distance that the needles move match the distance between the two feed holes in the wheel above the needles. That could affect tension. Sewing machines are pretty clever about making sure that the path of the thread stats about the same length as the needle moves up and down. There are some pretty good videos about how a sewing machine works. I'd expect knitted cird to be much more stretchy than woven or braided cord. There's a Japanese braided form called kumihimo. There's a lot of good instruction about how that's done.

[@prathameshraikar5428]

This is just unbelievable😍 😱...... Great job!!!!!!

[@homemadetools]

Beautiful little knitting machine. We shared this video on our homemade tools forum this week 😎

[@Runescope]

OoOOoOOoooo it makes a string! How wonderous!

[@metamud8686]

Love what it does .. but .. what you you do with the 'turd' that comes out? A long piece of intertwined yarn .. but what is the use? Rope?

[@mjtunstall1976]

cool, try making fly wheel to help reel the knitting cord onto the driveshaft?

[@thefortnitebros2281]

What types of things can be created with the knit after it is done being created? I've never seen one of these before, so I am curious as to what can be done. Maybe hoodie strings or an accent to an outfit?

[@Wyld1one]

Could be simplified. Remove top axle, and thread holder. Top ring (above needles) - add plate with two holes and two pins on top(for bobbins) rotate this entire plate. So it goes bobbin to hole straight down to needle area. Vastly simplfies treading too.

[@Wyld1one]

Oops.treading should threading.

[@melody3741]

@@Wyld1one you can edit comments by pressing the three dots button

[@melody3741]

Also this is a really smart idea but i think that is maybe for slack or tension.

[@jorgerobles628]

Excellent DYI video!!! Do you think you can do a circular knitting machine? Or a small flat panel machine!!!! That would be AWESOME!!!!!

[@decimaldelimiter587]

Thank you for some interesting solutions. But, if I understand right, yoiu use at the moment only the half of your electronics. Why is the purpose of the rest of?

[@hamjudo]

It is a simple DC motor speed control for up to two motors. Since this device only uses one motor, the other half isn't needed. Any speed controller that can handle the motor would work.

[@MrInnovative]

I always design PCB for broad applications so no need to design new PCB for every next project.

[@mcufuk6799]

şerit şeklindeki metali ipliğe saran makine üzernde de bir çalişma var mı sizin?

[@HansBaier]

This is so amazing. I just got a 3D printer. How do you plan and design such a machine?

[@papalevies]

Where do they sell these hosiery needles? there are many types of them

[@oybekumarov9221]

Magic!

[@felsinferguson1125]

Neat mechanism, but I'm trying to figure out what point there is, unless you're looking for oversized shoelaces?

[@dd07871]

Are those ICs 555s?

[@rainerbischoff9407]

Respekt sehr gute Arbeit 👍👍👍

[@masumgazi80]

Hi Boss,, Where i get this plastic wheel...? Its get difficult

[@sami_2119]

You are different. Great work.

[@rafaelmontserrat4443]

What kind of profiles did he use for the frame?

[@MrInnovative]

its 15mm din rail

[@AbdulSattar-m4p]

​@@MrInnovativewhere are you from and you can send me your watts app number

[@endrymargam7863]

Hopefully more thoughts on cotton fabric recycling machines etc

[@AdjustinThings]

square shafts is genious. I'm using round stock like an idiot.

[@ramonfl5295]

Congratulations! Great work!

[@bertspeggly4428]

This is most ingenious, similar to the ones that are made from Meccano, but I don't see why you need all that electronics just for a variable speed motor?

[@mr.mohammadhameed3509]

Excellent👍👍👍👏👏👏💯 thanks a lot Could you please list the material and equipment used for this model..

[@tenlittleindians]

What is this knitted cord used for?

[@carolinefromspeakinstitche8888]

look up icord projects, it's how you shoe laces are made too

[@marknahabedian1803]

I think the shoe laces I've seen have been woven or braided rather than knit. I'd expect knitted laces to be too stretchy.

[@partsprovider902]

Nice job so nice brother

[@violettracey]

That is amazing!

[@electronic7979]

Excellent 👏

[@ryanbergman5137]

Can we purchase compleated machine kit?

[@terapode]

That´s very clever.

[@gaminglegend5535]

Plz make a automatic chaff cutting machine

[@DarshanRayate1]

U can try 4 color thread or more

[@vigneshkumar127]

Where we can get the design

[@مؤيدكريمدجلة]

تحية طيبة وشكرا لكم على العمل الجديد

[@joaowagner5852]

Magnífico 👏👏👏🇧🇷🇧🇷🇧🇷

[@pif_el_kien8254]

Une machine à tricotin ? Génial !... Elle est pas belle, la vie ? On inventera bientôt une machine à jouer aux cartes ou à regarder la télévision à notre place. Il ne nous restera plus qu'à strictement rien foutre ... et déprimer. Ceci dit, bravo pour la performance technique !

[@xhancexd]

From winding Wires to winding yarns..... LMAO I wonder if you can also build a swing maching which are fully electrically/Compuuter controlled? Keep up the good work

[@abervalg8004]

This machine could be made from a smaller number of parts. Hooks could be placed directly under white platform with threads.

[@gorunmezbiri4176]

eski bir atasözü der ki çizimler insanı eli yüzü düzgün bir aileye götürür.götürmediği de olabiliyor bazen bu durumlar talihsiz bir anlar olarak üzgünlük yaratır hep hatırlandığında mekanik çalışımlar ise hızlandıkça verdiği yorgunluk sesi de aşınmalar gibi artar yavaşladıkca baygınlık verebilir aradaki o ince çizgiyi bulmak gerekir. bu eski atasözlerini hatırladıkca sanki ne biliyim işte normal bir insanım tabi bende.

[@seoexpertshohel]

Good idea❤️❤️❤️❤️❤️

[@rajendergarg6816]

Nice price this project from India

[@ogodogobogo]

I'll give you a free tip. Just replace the blue yarn with white, then sell this as "мартеница" in Bulgaria and make a fortune!

[@credair]

Sooo where's the 3D part files u used, what are the other parts list needed for this ???

[@foxprojects247]

This is awesome!

[@abmahmdalasry1776]

جميل جدن قمة الأبداع

[@САМВЕЛБАБАЯН-э6и]

hello to you please if you can refill the thread to the needles show the rosary in more detail thank you

[@ahmetizmir1081]

Congratulations. Very nice :)

[@dr.xx1]

great video, i like your channel!

[@fuzertv2479]

Do i get 3d print files?

[@weirdsciencetv4999]

Pretty ingenious

[@bouaslamourad3737]

Good jobe

[@yusaapaydn2399]

How can I access the 3D files of this machine?

[@rokrest09]

Теперь версию для вязания носков и шапочек. Ааа и трубы платья.

[@AhmedSalah-er7wk]

nice work

[@Vancha112]

Wow that's awesome :o

[@erdemoludeniz7551]

VERY GOOD ( !!! PLEASE DO NOT ADD BACKGROUND MUSİC )

[@manologomez3207]

excelente trabajajo tienes los archivos files?

[@EvgenyZakharov]

Похоже на шнурки, только толстые, надо с натягом сделать чтобы тоньше было

[@3dinovo2]

Excelente!!!!!

[@Miniatures-And-More]

Superb !

[@yourfactstory]

Cool!

[@John_Daw]

Шнурки можно плести для ботинок.

[@noorwafa3710]

Thanks

[@jayantilalnavik948]

Brilannt. Friend

[@aladinmovies]

Amazing

[@gopalgoud1926]

Muje ek winding machine banake chahiy

[@nagesh007]

Super 😍

[@aquibhameed721]

Plz make a Arduino based alloy circular saw cuttersharpening machine bro

[@dpoleev]

а нельзя было расположить горизонтально систему плетения тем самым выкинув часть механизма?

[@John_Daw]

Я думаю, это упрощённая копия промышленного станка.

[@midsbrothers]

Nice

[@sskyfashion]

Can you give me the parts used in this machine

[@elsayedabdala]

كيف يمكن ان اشترى مثل هذه الماكينه

[@abdraheem2171]

I love so much you 💓

[@republicoftutorials6068]

wonderful

[@srmstm1077]

super 🔥

[@paulhamacher773]

very cool! :D

[@kurmaraokurma4941]

Super machanism

[@EasyOne]

wow!

[@HistoryandFacts]

awsome

[@elarcadenoah9000]

where is tutorial how to print all pieces?

[@hctseng8668]

Inquiry specific 3d printer model number

[@infinitychromeful]

cool

[@antongyrt4814]

Вау, подшипники, это все равно что поставить подшипники в рулон туалетной бумаги)

[@DarshanRayate1]

👌👍

[@ШакировНаиль]

Супер!

[@subhashkucheriya3472]

Muje AP se bat krni

[@a96status44]

Why don't you sale these.. Make a business

[@Makkah.Laboratoire]

👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@davey2k12]

Bro make a rug 🤣🤣🤣

[@manoranjanrana2371]

Hi