124mph!! Fastest RTR boat in the Universe! TFL Zonda! 😲 Props by Dasboata 🚀

[@MrMad2424]

Buy this boat here www.banggood.com/custlink/KGv3Uw385I Buy the Black version here www.banggood.com/custlink/KmGKkuIFAd

[@marshallday538]

Bang good wont deliver the boat to uk due to our problems with lack of truck drivers since we left the EU. Not possible to buy right now. Great price with your discount added also, when they will deliver i will buy 😁👍

[@MrMad2424]

That sucks! You'll get one soon and have a blast with it.

[@peterpyzer]

Hey mrmad after your tipps i got 104 mp/h Thanks Mate m.kzbin.info/www/bejne/pme7g3qkf8ifo8U

[@waymanlittrel9028]

i seen the boat flip and i was like "aww my my boy gonna have to swim out and get it" then i seen him pull out that tug boat with the fabricated corralling attachment my mind was blown. i enjoyed the video my friend.

[@MrMad2424]

Appreciate that Bro! Yea gotta have my rescue rig. Lol!

[@8kigana]

that was sick, the man knows how to take care of his boats with other boats!

[@EmilWilkensRC]

Looking forward to that clean 120+ run! Great job non the less 🥳 Keep it real and dont get distracted by the competition bro! Glad to see you back with the zonda. Cheers

[@MrMad2424]

It will do it. No reason for it not to. If you watch the Datalogger it clearly shows the boat hitting top speed way before I hit the limb that broke the nylon rudder screw that caused it to roll. No spikes in speeds it was all consistent and if you watch closely you will notice that I had already let out of the throttle and was starting to slow when it rolled. Going by the slow reading it's still an achievement that has never been done before with a zonda or any RTR boat before.

[@christophercurry7410]

Dear Mark, I had some bad luck with the carbon Zonda I just got. One of the carbon battery trays popped loose when I was trial fitting a battery. I don’t even have it assembled yet. It looks like the factory glue didn’t stick to the shiny smooth carbon trays. What can I do? Thanks.

[@MrMad2424]

Use JB WELD original. I put it on all of mine before i even run them normally.

[@christophercurry7410]

@@MrMad2424 Thanks, I did what you said and JB Welded the loose one. That stuff is the best. How do you normally get the trays loose?

[@MrMad2424]

I dermel the old epoxy off or on some I put the JB weld over the factory epoxy overlapping onto the tray. Hardly ever have any issues after I do that.

[@christophercurry7410]

@@MrMad2424 Yeah, thanks. Some of the little under tray tabs stuck to the hull and some to the tray itself. I roughed the surfaces up and applied the JB. So far, so good. PS- I put some .6mm sticky backed neoprene pads on the trays and got some good rubber coated battery straps. They don’t budge in there.

[@MrMad2424]

@@christophercurry7410 Very Nice!

[@kingtriton7202]

Just stumbled on this and I have to say what a genius idea. I was thinking about a way to retrieve my catamaran if it flips and I was thinking use my spare boat but wasn’t sure how. Thank you for this. 120 is crazy fast btw. Excellent work

[@MrMad2424]

Thanks!

[@JohnWong-t2o]

As usual you achieve other peoples dream. Still trying to achieve my bucket list of 100 mph, dont know because I just turned 76 years old. I just keep stroking. God bless!!!!!!!!!

[@MrMad2424]

The retired cook? How you been doing buddy? Thanks for stopping by. Hope you are doing well!

[@bushcrafter6416]

The best Zonda run I have seen on UTube, Great location, Perfect day. Nice recovery, Thanks for posting...

[@MrMad2424]

Thanks Bro! Appreciate that!

[@mtctookie25]

Yesss sir, the Zonda was screaming, congratulations on that P.B. One Luv! 👍🏾🚀

[@MrMad2424]

Appreciate that Bro!

[@ebermorse9394]

You just upped the ante once again. What an Amazing run !!!! Congratulations!!!!

[@MrMad2424]

Thanks Bro!

[@tjwrongwaymead8374]

I want to make my ZELOS break 💯.. that was awesome. And I have to say your retrieval rig is super cool too. Nice . Cheers !

[@MrMad2424]

Thanks! 👍

[@pedromonteiro2941]

There you go ...... ! SUPER COOL speed ... ! Raising the bar once again ! I am REALLY enjoying the competition between you too .... Lots of fun for me ( and lots of work in minor details for you both ) Happy boating ! P.S. Waiting to see your latest 2 Proboat boats going really fast with new setup and props

[@MrMad2424]

Thanks Pedro! The others will be rolling soon. Been busy.

[@pilotg222]

Which Battery are you running ??

[@MrMad2424]

I run some Turnigy, Tattu/GensAce, and Revolectrix mostly. Nothing special.

[@pilotg222]

@@MrMad2424 4s or 6s , 6000mah 50c or 100c

[@MrMad2424]

@@pilotg222 4-3s lipos in series to make 6s to each esc. I like to run 5,000-6,000mAh 100c work best but at least 60c minimum

[@pilotg222]

@@MrMad2424 why are you doing 2-3 so in serie and not just 1 -6s ??? What is the difference are the effect

[@MrMad2424]

@@pilotg222 Yes in this run. I have ran both ways not much difference that I can see in speed passes. 1 lipo in theory is less resistance because less wires and adapters but not much performance difference from my test.

[@scottmitrano3950]

What brand and model tug boat is that? I want to get one of those if they are still available.

[@christophercurry7410]

Dear Mark, I am going to be running CHNL 6S 70C G+ batteries in whichever Zonda that I end up with, as backorders are prevalent. Do you think I should go with the 5000mAh, (886g) or the heavier 6000’s (1075g)? Thanks for your time.

[@MrMad2424]

Dont think 6,000 will fit. better go 5,000mah.

[@DronemanJoeRc]

Hey bud whats up that was a great run. Ive been running boats with my bud naveda08 here in the north and i really admire your speed and love for the hobby. Thanks for sharing bud!! Great job!!👍👍👍

[@MrMad2424]

Thanks man! Appreciate that. Boats are addicting for sure.

[@stevebeltra5472]

Hello sir. Great your videos, thank you. Do you prefer this one or the Miss Geicko?🙂

[@MrMad2424]

This one is better for straights and geico is better for turns. I like the Zonda better cause it's faster. 😀

[@OhOhORiley]

Very nice…!!! What remote and servo are your running…?

[@MrMad2424]

futaba 3PM and an amazon 25kg servo.

[@philclark1688]

Ran Dumas back in the day, 40% nitro never got close or dreamed of theses speeds. Much has changed, no 500hp in a street rod is considered weak and back then you had the baddest car in town. Gotta say you have a great place to run a boat. Enjoyed the video!

[@paulscrivener4307]

Absolutely amazing bro, You keep doing your thing Love it 👌👌🇬🇧 Subbed your channel 👍

[@MrMad2424]

Thanks bro!

[@christophercurry7410]

Dear Mark, I am considering getting a Zonda. Do you know if CNHL 6S 5000mAh 70C G+ packs (60x50x146mm) will fit in the boat? Thanks, Chris Curry.

[@MrMad2424]

I haven't tried those 6s packs in the boat.

[@jmoe2060]

Awesome! Congratulations man!

[@MrMad2424]

Thanks!

[@christophercurry7410]

Dear Mark, what props should I ask Chris Hoffman for on my 3674 2075KV 180A Zonda for fast sport running on my 700ft pond? Also what is your opinion about the larger 4092 2140KV SSS motors? Are they too much? Does Chris have a prop setup for them as well? Thanks for your time, Sir.

[@MrMad2424]

Super Zonda props if you want one or two passes for max speed. 1717 props for through the pack fun around 90+mph depending on your setup.

[@christophercurry7410]

Yeah, I want it to be fast, but be able to run a 6S 5000 through it. Good to hear from you! Boy, those 70C G+5000’s just fit. 0* timing is what that motor likes? Thank You Mark.

[@MrMad2424]

@@christophercurry7410 yes correct

[@Mykicksaresick718]

What type of 6s battery are you using?

[@MrMad2424]

Normally CNHL 70C G PLUS or Turnigy Panther graphene packs. 5000mah 3s

[@tiffanynicole7260]

Damn that beast is in the wind. You got the perfect place to do it though you need it too as a whole different ballgame from 70 on my pursuit wow!

[@MrMad2424]

Thanks!

[@johnwong5529]

Your still at it. Congratulation for a job well done. from the old retired cook

[@MrMad2424]

Yes sir, still playing with toy boats when I have time.

[@spol46]

Hey I have the miss gieco 36 and wonder what props I should use and where I can buy them thanks

[@MrMad2424]

for a couple of speed passes the super geico props from dasboata can get over 100mph with a good setup. best to email him at [e-mail]

[@gewglesux]

love that GPS UNIT! Man fast boat!

[@MrMad2424]

Thanks! I really like it as well.

[@chuchumad]

My cousin use to be the throttle man on the JBS racing Mystic turbine boat, where did you get the graphics?

[@MrMad2424]

Cool! The graphics come already installed on the boat.

[@eltorocal]

120mph tape?

[@MrMad2424]

Yes sir.

[@michaelblackburn4952]

In your honest opinion, is the carbon version better than the fiberglass? Is it a must for stability?

[@MrMad2424]

Only stronger. No more stable.

[@inspireonex]

Im as impressed by the recovery rig as the fast boat.

[@MrMad2424]

Thanks!

[@francoisk2008]

Hi what servo and batteries (volts, amps, c, brand) are you using ?

[@MrMad2424]

amazon 20kg servo, 6 s lipo 22.2v 60c Turnigy HD

[@DroningaboutNW]

Absolutely awesome watching you put these things well over 100 mph.

[@MrMad2424]

Appreciate that! Thanks!

[@maximpodolskiy4015]

Gosh, this is awesome)) How much time can you run the boat in such fast running mode? Till batteries discharged? Or the equipment get hot and cut you off?))

[@MrMad2424]

Thanks! This is a couple passes only. The prop is very aggressive and can heat the electronics up quickly.

[@maximpodolskiy4015]

This worth it))

[@kenricknelson310]

Great Video Bro!!!💯💯💯 I like how u casually did everything in a timely manner(in a sense)ONLY CERTAIN PEOPLE know what I mean😁😁😁👍👍👍💯💯💯

[@MrMad2424]

Thanks! Appreciate that. 👊

[@chuckingram5966]

You have amazing eyesight I couldn't see that far away to save my life.

[@MrMad2424]

Lol! Thanks!

[@frankiecoleman5466]

What kind of props did you use to achieve that speed??? And where can I buy them?

[@MrMad2424]

custom abc props from dasboata best to email him at [e-mail]

[@tombarry3193]

That is an amazing accomplishment! Love watching you send it. Congratulations!

[@MrMad2424]

Thanks man. Appreciate that.

[@JasonC1981]

Hell yeah! Glad you got it back in to shore!

[@MrMad2424]

Thanks Bro!

[@WHEELZ710]

where do you find that wide Renfrew tape at?

[@MrMad2424]

www.offshoreelectrics.com/proddetail.php?prod=fab-tape-15

[@mildtowildrc7343]

That water is so smooth and again amazing run on this boat and your setup👍❤️

[@MrMad2424]

Thanks! Appreciate the support. I got a 118mph pass on here also.

[@erichulsey30]

are you running 4 batteries? I see some wires coming from the front of the boat.

[@MrMad2424]

Yes 2-3s lipos on each side.

[@erichulsey30]

@@MrMad2424 i currently run 2 6s, thought about switching to 4 3s LiHVs. awesome runs though for sure, keep it up.

[@hunternoel5378]

What prop and batteries are you running

[@MrMad2424]

dasbaota props

[@joshchatwin8569]

What set up you using here

[@MrMad2424]

All stock electronics with props by dasboata

[@petergoodwin2465]

What a beast , fastest boat I've seen. Great video mate and thanks for the video.

[@MrMad2424]

Thanks man! More to come! Boat is in perfect condition.

[@petergoodwin2465]

@@MrMad2424 I thought something would be cracked or broken. What a blast to watch , our comunist traitors have us in lockdown in Australia so I'm building a few Arrmas and Tamiyas, then heaps of work on the wife's 67 impala and my old Australian built Chrysler regal se. Sometimes the commie barsteds do us a favour. Great video mate, really thought the boat was wrecked.

[@MrMad2424]

Thanks! All good with it. .That sucks you are on lock down. Better days to come for sure.

[@brianbouman661]

You are a sick man! Well done! I'm very happy for you!

[@MrMad2424]

Thanks Bro!

[@terachartthayakorn5175]

Wow nice run, however did any hull crack after flipped?

[@MrMad2424]

Thanks! No damages at all.

[@adamj3579]

So your running 1 6s battery per esc?

[@MrMad2424]

yes

[@mildtowildrc7343]

Not sure how I missed this video,but dam that was freaking fast👀I need a prop for my M34 I just finished up from these guys❤️

[@MrMad2424]

Thanks Bro! The M34 is a good looking boat.

[@scottg429]

How much work are these boats to maintain compared to rc cars?

[@MrMad2424]

Only have to grease the flex shafts after every 3 or 4 runs and that's it as long as you run in fresh water and not salt water. Much easier boat maintenance than car maintenance.

[@nolacross704]

What batteries and how many s on each esc

[@MrMad2424]

2-6s to each esc. All name brands are pretty close. Just make sure the c rating is at least 50c or higher. Turnigy, Gens Ace/Tattu, and CNHL brands are all some good ones. I like to run 4-3s packs in the 5-6,000mAh range myself.

[@nolacross704]

@@MrMad2424 how do you like turnigy i have some i have ran with my spektrum batteries and the turnigys are puffed a ting bit while others are solid granted there way more expensive than turnigy

[@MrMad2424]

@@nolacross704 Never had any puffing with the Turnigy HD packs. The Nano tech's are crap. They puff if you look at them wrong.

[@smz5]

That’s insane speed for a stock electronic set up 👍👍👍👏👏👏 can share what’s the size and type of Dasboata props you using? Thanks in advance and looking forward more 💪💪💪 speed run videos from you 🙌😍

[@MrMad2424]

Thanks! These props are totally custom from dasboata. if you want a set it's best to email him at [e-mail]

[@marcandreasson87]

Great speed pass 😮 ❤ Your rescue tug was unbelievable and amazing. Tks for sharing.

[@MrMad2424]

Thanks for watching!

[@mildtowildrc7343]

Man I love the spot you are running,freaking glass in the morning❤️👍Hitting anything bigger than a stick at 100mph is bad news!Another fast pass and great video🏁👍

[@MrMad2424]

Thanks! Yes very true on the sticks and over 100mph.

[@steveburns3225-l2s]

Fantastic Mr M, you are the man, still on the same props ??

[@MrMad2424]

Thanks! Dasboata props.

[@Letsroll000]

Great job! Considering this in the near future. I know its apples and oranges but how does it compare to the Veles as far as build quality handling? Does this one require you to be on the throttle in the turns?

[@MrMad2424]

Both are built great. The Zonda has a carbon Kevlar inlay from the factory. No you can float this one in the turns because its so much larger than the veles. Zonda is larger so it's definitely going to handle better and take rougher water easier than the smaller veles.

[@Letsroll000]

@@MrMad2424 awesome thank you!

[@Letsroll000]

@@MrMad2424 What is the outer hull made from?

[@MrMad2424]

@@Letsroll000 fiberglass

[@Letsroll000]

@@MrMad2424 What props were you running from Chris or recommend? The Dasboata prop I got from him for my Veles worked great, just struggle keeping the nose down at times. Was going to flatten the bottom but thinking about parting ways with it and playing with this Zonda for awhile. Too many hobbies or I would keep both.

[@paulmisino8725]

Well done mate. I put an old fpvcamera in my rescue tug works wonders for accurate recovery. Love your attempswith various boats, battery specs would be great to assist your boating brothers. Many thanks for yourattempts and investment,both in equip, time and videography.

[@MrMad2424]

Thanks! I appreciate that.

[@MargPagee]

Great concept little more power on the push boat

[@MrMad2424]

Thanks!

[@marshallday538]

NEW STICKER NEEDED 120mph club… Wicked and crazy… Wish I bought 1 when I had chance in lockdown, won’t deliver to uk 🇬🇧 at the moment Well done sensai 👏

[@MrMad2424]

LOL! Thanks Bro!

[@Qwik86z]

It went by you like a rocket! Great Job!!

[@MrMad2424]

Thanks! It was moving pretty good.

[@Qwik86z]

@@MrMad2424 Absolutely, after watching the SAW videos it’s crazy to see an off the shelf boat running that fast.

[@pablonosnothing.1952]

I bought a big RC coast guard cutter years ago, never used it, till now. After seeing people using boats to retrieve there flipped boats, I took a lot of the crap off and got some foam attached to both sides to make it more stable, i used pool noodles, and like you made a catcher, but I attach mine to the boat, so it wont come off till i take it off. congratulations and keep having fun.

[@MrMad2424]

Nice! Thanks for watching!

[@ifly65]

What tug is that? Im still in shock at the Horizon prices (I shouldnt be) on their tugs. Ive flown a hotliner 179mph Sunracer 3 is the model. You would think a boat flipping at that speed would shred it into pieces.

[@MrMad2424]

AquaCraft Fire Rescue boat. Its been discontinued for years.

[@Joe_Gervasio]

It's all about patience.. Awsome run!!!

[@MrMad2424]

Thanks!

[@jonathankey1226]

Damm 123.6 good Lord great run my friend this is the year for boats and onroad cars that was 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@MrMad2424]

Appreciate that Bro!

[@jonathankey1226]

@@MrMad2424 ya man MAD props to ya must say one hell of a run. WOW

[@MrMad2424]

@@jonathankey1226 Appreciate that again.

[@markrusk2870]

Will never get the 3 minutes back of you tapping the hatch shut

[@MrMad2424]

Sorry I'll try to be faster next time. Thanks for the support.

[@markrusk2870]

@@MrMad2424 you are a good man, love your video. Sorry about the spelling I’m not that smart. I could just hardly wait to see the good stuff like the 120mph

[@MrMad2424]

@@markrusk2870 All good bro. Thanks for watching!

[@RCDUDE81]

WOW bro what a pass!! I honestly never thought that hull could reach those speeds! Might be a good SAW boat for them German boys!🤣Congrats on another huge achievement!😎🤘🤘

[@MrMad2424]

Thanks Bro! Appreciate that! Still running some year old packs. But not too bad.

[@FLSharkdiver]

Wow, what a rip, brother.🚀🚀 .. It looks like one of your Seaking 180 ESC must have Overloaded since I still hear the beeping sound??

[@MrMad2424]

Thanks Bro! Those were the stock Seaking 120's . The beeping was because it lost radio contact when the antenna was under water. I turned the transmitter off cause I figured it would be a long rescue. Lol!

[@craiglafler5581]

where can I get a white one now?

[@MrMad2424]

Try offshoreelectrics.com

[@rcmodman403]

Freakin awesome Mr. What is the app you use for telemetry ? also what props did you end up going with from das ? I have a tunnel with same motor set up its crazy lol

[@MrMad2424]

Thanks! That was the fit file from the gps logger. I use the Sky RC GSM020 sometimes it's a great app based speed meter. These prop specs haven't been released yet.

[@rcmodman403]

@@MrMad2424 Cool , was thinking about getting a SkyRc Gsm didn't they just release a new one ? Also do you prep your hull?

[@MrMad2424]

GSM020 has been out for a while. I haven't done anything but put some two part foam on the side seams.

[@rcmodman403]

@@MrMad2424 on outside of my hulls I use XPEL - R1390 originally bought for my Mini cooper but works great on the hulls kinda like soaping sled runners in the snow lol

[@MrMad2424]

Thanks for the tip.

[@atomos319]

Any hull damage?

[@MrMad2424]

Nothing at all.

[@brandonwilkie2927]

Skip to 5:45 for the first run

[@MrMad2424]

Thanks! Yeah got to make sure the haters don't say my speeds are made up. Unedited run keeps the haters in check.

[@DwightPerkins-i7t]

The boat definitely moves. I know you will get all the bugs ironed out and go even faster!

[@MrMad2424]

Thanks!

[@raptorscott49]

Looking to buy ASAP. Are there any active coupon codes ??

[@MrMad2424]

Not that I know of

[@raptorscott49]

@@MrMad2424 oh well. Worth a shot. 🤷. Thanks for the quick reply. Correct me if I'm wrong but From what it looks like it comes with out props??

[@MrMad2424]

@@raptorscott49 comes with props and will do around 55-60mph with them. You only need radio, receiver, and servo.

[@raptorscott49]

@@MrMad2424 Gotcha. Thank you. Are there aftermarkets you would recommend to achieve the 100+ speeds? Sorry, don't mean to disrespect. I know you've put in a ton of time to receive those results.

[@MrMad2424]

@@raptorscott49 Super Zonda props from Chris Hoffmann Best to email him at [e-mail]

[@peterpyzer]

I have the same boat and props from your Buddy (im from Germany) but my max is 100mph even after bigger engines Dont know what props he gave you what Timing you Drive how much you turn your props down or high and so on but its great really

[@MrMad2424]

Sounds like your boat is running wet. Raise the struts and move batteries back. Should get 110mph+ very easily. Stock timing is what I use 7.5°

[@peterpyzer]

@@MrMad2424 wow thanks for your answer... yes i took the batterie as front as possible in the boot nearly to his edge under the front hull. Because i often flip at Higher speeds....but 100% i will try it. My props and the shafts are exactly parallel to my down boat. Timing i testet max so i think 27.5 than 15...no difference If you have any more tip to my Setup please tell me im getting down from all testing

[@peterpyzer]

@@MrMad2424 maybe i can make you a short video on KZbin and send you the link by here on comment and i Show you my boat and you can take a Look and answer there for Tipps ? Would be awesome

[@MrMad2424]

Need good batteries. Turnigy or CNHL graphene packs. The cheap no name packs on amazon won't get you there.

[@CoachD386]

Yessssir let’s gooooo 💪🏾💯🔥

[@MrMad2424]

Appreciate that Big Bro!

[@caseytaylor2653]

Need a a Dasboata on the tug lol..work on making the fastest tug boat out there 💪

[@MrMad2424]

Yes sir. 😆

[@Welshrobb]

Wow.... left a thumbs up 👍

[@MrMad2424]

Thanks! Appreciate that!

[@6-Iron]

I think the worlds fastest boat deserves some proper hatch locks. All of the engineering that goes into these boats and have to tape the top on like a cheap Walmart toy? Love your retriever rig. 👍🏼

[@MrMad2424]

Hatch locks would definitely be nice. They can be installed if one wants them. Thanks bro!

[@mildtowildrc7343]

That’s more weight and every gram counts trying to get top speeds😂

[@pagstv06]

@@MrMad2424 hi sir can you share what the secret?propeller size and c rate of your batteries?

[@TimmerleonRC]

What a great run!

[@MrMad2424]

Thanks bro!

[@joshchatwin8569]

Wow how did you do this Kev’s wouldn’t go this fast can you or have you shown how to get it this fast

[@MrMad2424]

Thanks. I responded on Your other comment.

[@BigDaddy-rt9bg]

Good too see you back out throwing down numbers!!I was beginning to think you didn't care no mo.nice to rile up the haters again huh.hope nobody gets too butthurt.next video#fastest in the galaxy 🏁🏁🏁🚀📬✌

[@MrMad2424]

Thanks Big D! Appreciate that! I been around just been too hot for boats not to mention busy to do much boating. Yea it's hater season again for sure.😂 Hopefully there is enough Hateraid to go around for all of them. 😅

[@bongofury3176]

rescue is half the fun with these boats. great sense of relief when you get them back...

[@scable-eq7bp]

Were these runs done with the stock props or custom speed props? Be curious to see what kind of speeds it reached on the stock props. Pretty impressive runs....

[@MrMad2424]

Thanks! This was with speed props. Stock props go around 60mph. Video is on my channel of all stock.

[@Sbach342Guy]

@@MrMad2424 Custom props double the speed? What else is done?

[@MrMad2424]

@@Sbach342Guy That's all just props and tuning only. I show everything in the boats on my boat to prove its stock motors and esc's.

[@Sbach342Guy]

@@MrMad2424 by tuning I assume you mean adjust the angle of the prop? I know that made a huge difference in speed on my full size bow rider. Are you running the stock flex cable?

[@MrMad2424]

@@Sbach342Guy Yes tuning meaning adjusting the prop angle, and cog of the boat. I am running dasboata cables in this run. I ran the stock ones to around 113mph or so. A lot of R&D in the props and didn't want to risk loosing them.

[@Heyitsme2025-me]

You can hear the morning traffic as everyone is headed to work and this guy is playing with his dinghy.

[@MrMad2424]

You crazy..... the sun's about to set boy. Pay attention. Thanks for the view though it really helps.

[@treyrahman]

INSANE speeds brother ! The fact that the boat held up under a crash at those speeds says a lot about the duribility of the boat 🤙🏼 how did you go about water proofing your reciever ? CHEERS brother

[@MrMad2424]

Thanks! I spray "corrosion X" on the receiver internals and all good.

[@tjwrongwaymead8374]

I have to bring my inflatable raft. I'm too paranoid ill lose it 😂

[@MrMad2424]

For sure!

[@asiringoringo1]

Is 9500mah 6s from cnhl will fit in this boat ?

[@MrMad2424]

I have never tired but I from the specs given they should.

[@asiringoringo1]

@@MrMad2424 do you know , the larger spec will fit in to the boat ?

[@MrMad2424]

@@asiringoringo1 I don't own those batteries to try.

[@kevinsimonsen2190]

Crazy speed 😲 Congratulations 👏🏼🙂

[@MrMad2424]

Thanks!

[@mikehagquist5198]

He has the best props. Have a couple

[@MrMad2424]

Yes for sure! Thanks for the support!

[@wally6629]

Say MAD, what's that RECUSE boat you got there? Nice spot to run. The ZONDA is differently cooking!!

[@MrMad2424]

Thanks1 It is the AquaCraft Rescue 17. It has been discontinued for a couple of years now. Horizon has a rescue tug dedicated for rescuing if you want to check it out. www.horizonhobby.com/product/horizon-harbor-30-inch-tug-boat--rtr/PRB08036.html?campaignid=19027537130&network=x&device=c&gclid=CjwKCAjwkLCkBhA9EiwAka9QRpPVAUD_utWA2f9vEqiNqh6wZI_vxo4OS7S2EC0B3YSeUDAIPNcePhoCrJUQAvD_BwE&ifnotmobile%3A%5Bvalue%5D=%5Bvalue%5D&random=1482644815639317395&merchant_id=1209399&product_channel=online&

[@lamph6970]

Incredible speed!! Congratulations. Don’t suppose for us hopefuls out there that you could show us a few pointers on things like how to set up strut angles etc? I know it would be giving away trade secrets but in South Australia and on KZbin I can’t seem to find anyone that can help us out. BTW its always a pleasure to keep watching someone that has a great passion for the boats that we use!

[@MrMad2424]

Thanks! Strut angle depends on props and cog of the boat. I'll make a video sometime. The h-gang keeps throwing mud and slurs towards me on this boat so it's kind of hard to help give much info publicly.

[@lamph6970]

@@MrMad2424 It’s all jealousy! Love your passion and dedication.

[@MrMad2424]

@@lamph6970 Thanks!

[@LosDoyerss]

1,500 dollar boat and you gotta use tape to secure the hatch!?

[@MrMad2424]

$1500.00 boat??? This boat only cost like $600.00/ But yes in RTR form you will need to secure the hatch or use tape for waterproofing it.

[@sonnydayz2118]

Insane. That's how fast Bigfot humps!

[@MrMad2424]

Lol!

[@norcalrc]

Damn . 120 mph in a rtr? Frickin amazing

[@MrMad2424]

Thanks Bro! Appreciate that.

[@scaleworksRC]

🤡"The FASTEST name in radio control" Zonda: Hold my boat 🚤💨

[@MrMad2424]

LOL! Thanks bro!

[@1984BigP]

I can’t believe how smooth your water is. I need to find a spot like that.

[@MrMad2424]

Thanks! It's not like that all the time.

[@jayhuang9495]

wow super fast!

[@MrMad2424]

Thanks!

[@boknott9440]

BEAUTIFUL PASS!!! BUT WHY WAS IT SINKING SO FAST?

[@MrMad2424]

Thanks! I I hit a limb and it rolled and the hatch came off causing water to enter the boat.

[@boknott9440]

Ok.. thanks for responding. I want to buy one soon

[@MrMad2424]

No problem!

[@alainbellemare2168]

But does it run

[@MrMad2424]

Thanks!

[@michaelblackburn4952]

Congratulations that’s flying.!

[@MrMad2424]

Thanks!