17PW26 No Pfc Repair

[@brianjames6890]

Thank you for your time and effort uploading the video I found it most interesting to say the least. Regards, Brian 👋👌👋👌👋

[@walker55able]

Thank you for this as i have exactly the same fault stuck in standby with the other power supply you show and your video maybe the way forward thank you

[@MrReeceyburger123]

Ahh awesome mate, glad to help. Let’s keep them out the bin 😇

[@gabrielmmendie9436]

Hi buddy, you're good. I really enjoyed your explanation. It really helped to troubleshoot mine. I'm hitting the bell, as well subscribing. Many thanks to you.

[@MKcooksmamoonakausar38]

Hi i had power fluctuation in home and after that tv wont turn on any idea why

[@RepairAllTV]

it has blocked. It was done as a wire. or as a fuse.

[@MrReeceyburger123]

What is blocked ?

[@RepairAllTV]

yes

[@patrickdurees3025]

have got same tv and when i switch it on i get two thin lines across middle of screen about 6 inches apart then screen goes dark,backlight is still lit but i still get sound any ideas would be welcome

[@slobodanjankovic5569]

MrReeceyburger123 Hi friend I have big problem,blinking light on/off... ( Have Video on my chanel ) I have Replace all Cap only standby 2700uf I didn't I forgot to order... even replace c881 with new one. uf5402 diode constantly church,this evening I replaced c881 with new one and and put uf5404 TV working almost 15 minutes and again uf5402 diode church ??? Thanks in advance for advice on what to try

[@cdahlin6531]

Have a problem with my tv with the same specs and cards. Just wont start. No standby light. Dont know what the problem is. Worked just the other day. I have measuerd with a "powerpen" and I have power all the way to the card.

[@bobsoft]

I have a Samsung power supply board that has blown a surface mount diode. I can't find a schematic for that board. Is there any way to figure out what to replace it with?

[@MrReeceyburger123]

Cant help sorry replacement board might be best.

[@uK8cvPAq]

Can you find any similar looking diodes on the board?

[@thehitman5007]

My head is spinning with the board flipping so close 😆😆😆

[@MrReeceyburger123]

Sorry I didn’t really have a good camera at the time and didn’t really consider what I was doing when filing lol doh

[@thehitman5007]

@@MrReeceyburger123 hahaha. Its alright. Gotta start from somewhere. Good informative video though. Subbed 😊

[@dennisk8930]

To much Red Bull?

[@saarike]

Nice vid!

[@uK8cvPAq]

Interesting, viperfrank had one of those little ceramic caps fail short in a recent repair too. Maybe its a low quality batch that all the cheapo manufacturers like Vestel bought up.

[@MrReeceyburger123]

Cheers also yeah just acrappy design causes em to fail.

[@DonkeyLearningIT]

Haah, I'm using the same board to produce a video series on SMPS repair. Now that coincidence is funny, especially when it shows how small KZbin is in fact, despite zillions of videos, just clicked on yours by pure coincidence, without YT search. Regarding the ceramic cap, the design is awful. There is a high voltage trace running right below the cap, and the cap sits less than a milimeter above it. This trace is not connected to any of the two leads. Such design is destined to fail... Good repair though.

[@MrReeceyburger123]

Hey man cheers just watched a few of your videos sorry I didn’t reply sooner 👍