Govee DreamView P1 Light Bars vs T1 TV Light Strip- Which Should You Buy? (H6054 vs H6199)

[@MrTekSuggest]

New DreamView G1 Gaming Light vs T1 Pro TV model: kzbin.info/www/bejne/hpCQq32lep18a5o

[@AlySoSweet]

For anybody recently purchasing the dreamview P1 bars. I just set mine up yesterday and I noticed the same issue with the colors displaying as mostly red and pinks when my screen was actually displaying darker or cooler tones. I mostly fixed this issue by adjusting the white balance setting in the app. Play around with this setting as it will be different for each display. The default setting was set to the warmest setting. I actually had to set mine to the coolest setting. Seemed counter intuitive but it appears to have fixed the issue so far. Hope this helps!

[@Kayoshu999]

Thanks I just bought mines

[@GreeKurdChannelMilan]

Does it have the same problem now? or has there been any update patch to fix it?

[@Hatouchu]

I've been searching for this EXACT video for a week or so. THANK YOU for making this video! Your review style is top-tier and deserves to be recognized. Keep it up!

[@MrTekSuggest]

Much appreciated! I’m glad it was helpful!

[@allenlejeune3303]

@@MrTekSuggest Or you can just cut some pieces of the led strip to make it smaller 😬 😬 😬

[@MrTekSuggest]

Make sure to check out my latest upload of the Strip and Bar combo!

[@Revolutionized]

You are an example of an awesome KZbin creator. Good timing, mixing and plain clear dialogue and explanations made it much better than anything else available on KZbin about this product line. Keep on doing the great job!

[@freeyayo50]

Nice video. What's the show/movie you have playing at 13:42?

[@scoobertdoo4223]

Thank you for the video, I’ve wish they had the strips for smaller tvs but now that I’ve seen this I think the bars should be just fine

[@anthrobug]

Thanks for this fantastic review of these lightbars! I've been looking at different options, and your overview is hands down the best on youtube. You've not only gone into the details of installing them but also went further to provide helpful tips that really actually, well, help. Looking forward to your other videos!

[@304cortez85]

I know this video is old but hopefully I’ll get a response. I just got the Govee backlight lite 3 along with the Govee 15 inch light bars to use with my 75 inch tv what do you think of those being thrown together in dreamview ?

[@imranio7]

Im using t1 with strip at back tv and rgbic light bars in dreamview and WOW collaboration is pretty good took me while to get it right but i think im 90% correct 😅 also make sure to get correct collaboration with bars you mess about AREA SETTINGS

[@JuOSteezy]

Guess I’ll have to give the immersion kit a try, really wish they had a dedicated option for 70”+ TVs. Hopefully the birghtness of the LEDs is enough to give the same effect on larger TVs

[@MrTekSuggest]

It’s definitely worth a shot. They’re a ton but of fun!

[@iceman62509]

They have one now. And I’m doing my research on it.

[@iceman62509]

@@MrTekSuggest question for you . Durability.. you made this video 9 months ago. Is your lights still working perfectly ? I’m thinking about going with the immersion strip kit for my 77 inch oled.

[@fronojo]

Watched this after buying the strip to see if I wanted the bars and your video made me 100% confident in my decision! Keep up the great work bro :)

[@MrTekSuggest]

Awesome, love hearing when my reviews help buying decisions!

[@logicalfa7168]

I use my AmbiVision for two years, and now I can not imagine watching TV without it. I have just bought the second TV and waiting for the new AmbiVision kit. It's awesome 👍 🤩

[@MrTekSuggest]

Nice what iOS are you using for your TV?

[@kakamistrz1990]

@@MrTekSuggest as I know AmbiVision's does not care about OS - it captures screen by fast camera. It is good idea to test it on the channel, as they are with this technology for 3 years already and looks much better than govee.

[@ufrl0216]

you think govee would just make a universal system that can connect to one camera and use several lighting elements dynamically depending on positioning. Wonder if thats just a software upgrade away

[@TheGranstaff]

I'm a little burnt out on watching videos and doing research the past two days, so I apologize if I'm asking a question you've already answered. I currently have a LGb7a 65" model and the back panel has a raised section -- a hump, if you will -- and due to that fact, I'm leaning more towards these Flow Pro Bars since I don't think the strip lights will be easily applied. Of course, it seems like the bars are better suited for a smaller model TVs and should probably figure out a way to implement the strip lights. What's your suggestion?

[@MrTekSuggest]

Hey man, no problem at all. I would really try to get the strips to work first because I really think that you would be much happier with the experience for your screen size. For a 65" TV, you will not be able to install the strips right to the edges anyway. What model TV do you have specifically?

[@rickylah69]

Hi, just want to ask if you can try using just one camera, split the USB output to 2 USB? Then connect each USB to both the flow pro and immersive device.

[@MrTekSuggest]

Unfortunately a splitter will not work for this particular model. But stay tuned I have a feeling you’ll be interested in some new products coming down the pipeline

[@theheavenlywaffle9140]

Yeah they sell a flow pro plus strips with one camera now

[@RememberingEverything90s]

I didn't know they had light bars!! Ordering them now! Going to have both on my tv for the ultimate experience

[@MrTekSuggest]

Haha, very nice!

[@MrTekSuggest]

@sw3d3r 2 cams are unfortunately required for the dual set up. Tutorial here: kzbin.info/www/bejne/h4rQdoN5dpepnbM

[@RememberingEverything90s]

You don't even notice them. To be honest. I love the Govee lights. I have them on all my tvs!!

[@RememberingEverything90s]

@sw3d3r yup. One for the immersion and one for the flow bars. I love it. Getting flow bars for the bedroom tv next. I love that the whole wall lights up now

[@Gamer1Tom]

I’ve got a 49 inch curved tv and thinking about getting one of the light packages for gaming. Do you know if the curved aspect causes any problems with placing the camera onto the screen?

[@michall1949]

15:15 - they show same colour instead two different (left orange/red, right blue) because they both sync to middle of TV where mostly blue is present.

[@MrTekSuggest]

The bars have actually received an update that helps their performance since upload of this video kzbin.info/www/bejne/h5q9ZaWlm5KrnZY

[@patrickyeary]

Glad I decided to rewatch this! Just got the flow pro and I already have the immersion, definitely need to recalibrate. Thank you for the tips!

[@MrTekSuggest]

You bet!

[@patrickyeary]

@@MrTekSuggest can I ask you something? What do you keep your brightness/saturation levels at for either product?

[@MrTekSuggest]

@@patrickyeary strip brightness=70/saturation about 15%. Bar brightness I keep below 20% when using with the strips so they don’t wash them out. Saturation about 15% as well

[@patrickyeary]

@@MrTekSuggest thank you! That’s close to how I had mine set up

[@Web-Slinger42]

How thick are the bars? My concern is how bulky they are to mount on the back of the TV.

[@shield400]

Will using a USB Y splitter allow you to connect both the Immersion & Bars to one control box?

[@MrTekSuggest]

It will not unfortunately. It is not recommended, and I have actually tried using a hub splitter. To no avail a dedicated camera is required for each

[@windshear5229]

Would like to see you comparing govee bars and phillips bars. Nice one cheers

[@MrTekSuggest]

Hey there, if I get my hands on the play bars, that it the very first thing I will do!

[@dmo848]

Wouldn't even bother. Phillips is way better but costs so much more. Only the strips are worth it. Govee that is

[@mikrikbell]

Don't bother, nothing commercially available even comes close to the Hue Sync box. The only setup to even get close is the Raspberry Pi with pass through HDMI, setup with the right programs.

[@compabuzzy]

@@mikrikbell i have a raspberry pi i need some more info on this please

[@eclecticlight.design]

Try WLED with a diy setup!

[@mikepierce4903]

Do you absolutely have to mount the camera on the TV? could you mount it to the tv stand instead for a more natural camera tracking position?

[@MrTekSuggest]

You don’t! Check this out: kzbin.info/www/bejne/foXRgqWJpbasbKM

[@koonm7774]

Thank you for info on a gift I purchased for my friend. Helped him install today. Just sent your vids for the best settings. Waiting for night time to see the results since his tv is by a glass door LOL

[@johnq6123]

Would 2 sets of regular light bars be best (brightest) kit for the buck?? Not looking at camera version bc I run 2 55" 4k tvees as monitors for my workstation. TIA!!!

[@melle3463]

Awesome review! The previous immersion kit I had from Govee I returned, because white was shown as pink and blue as purple. How do you find the color reproduction on these? Is it accurate?

[@MrTekSuggest]

The color reproduction is significantly improved on the 2.0 immersion. Have you check out my previous Govee video? kzbin.info/www/bejne/fpi4fmt6n7Vlq9E

[@backfandangoX]

my govee light bar seems to lean towards pinkish purple constantly during most scenes, any idea why it does that?

[@MrTekSuggest]

Hey! Try bringing the saturation all the way down to 1%, and make sure that there aren’t any other rgb nearby lights that the camera may be picking up. If the issue persist, move the camera to the opposite position you have it (either top or bottom) and test again. If no luck I’d do a rapid replacement with Govee!

[@Lbaez85]

You think I can get away with the strip lights on a 75inch tv? Or as I was thinking maybe waiting on a kit for a bigger screen

[@marcusm5127]

Yes the big kit is large enough for a 75 but you can't mount them on the edges.

[@Lbaez85]

@@marcusm5127 that kinda sucks then hides the colors a bit more I think I’ll wait for them to possibly make a bigger kit. Great Vod tho! I’ve shared it already many times.

[@luke50469]

In theory, can you use a USB C male to 2 USB C female adapter splitter cable to the control box to connect the light strips and the light bars to 1 camera and control box?

[@dmo848]

Take it off game mode and only use movie mode. Game mode flickers if u look closely. I thought with games it would be distracting but it's really not. Just extra color pop is all which is a plus in my book

[@akkansua]

Hi Sir, in my country I can only get a pair of second hand flow bars however my TV is 65 inch. What would be the downside of using these if I mount them at the rear?

[@MrTekSuggest]

Hey there, you’ll lose a bit of coverage using the bars versus the strips for your screen size. The strips are also able to leverage multiple zones during video sync mode. Whereas the bars can only track a single color for each side of the screen. You may find this video helpful, check it out kzbin.info/www/bejne/h5q9ZaWlm5KrnZY

[@akkansua]

@@MrTekSuggest thank you very much.

[@Crewson1]

Have you tried maybe using a USB hub to connect both light kits to one camera

[@MrTekSuggest]

I finally got around to trying this. And it was an unsuccessful project :(. The two cameras are required for the dual set up

[@Crewson1]

@@MrTekSuggest well that sucks

[@MrTekSuggest]

@@Crewson1 Agree!

[@jaybee1158]

Out of every one your a G bout yours homie. Nobody was good enough to explain the right way. Not everyone will understand tech talk and that’s what these fools be doing so it makes it harder to understand.. but the problem with these lights is most people like myself has the tv hanging so the bars are a lot lower. So I had to build either a wall mount or an adjustable speaker stand.. I know this is an old video but gots to appreciate it regardless.. I have the T1 version of this. And it didn’t have the option to stick these on the back of my tv. Soo I just used my Mexican ingenuity lol and made them stick a certain way bcuz mine are rounded unfortunately and I have my ps5 behind my tv I wanted it to look in the front as ghosted as possible.. I’ll tell you what homie it makes a bigger difference bcuz it adds on to the already strip of lights .. so those colors you mentioned at the end of this video I have not had that off color. It takes time to figure out and adjust the lights but the bars over power sometimes the led’s , so if one side is green and red bcuz I followed your style it’s pretty much on point. At first I wasn’t going to put the bars on but after watching videos and seeing yours and I ended up calling govee customer support and asked bunch questions.. there the ones that actually laid it down bout why the bars sometimes don’t catch that right light. So now everything spot on .. I know with certain games or things that are very fast the lights 90% stick with the games for most part. Nothing is gonna be spot on and I’m really hard on everything to be just right or spot on but in reality it’s not.. anyways much respect homie..

[@CalicoShellz]

Can I use this with a 100inch VAVA short throw laser projector or a 46in Ultra Wide Monitor?

[@MrTekSuggest]

Hey, I think the 46 inch monitor is much more realistic for these to get the best coverage

[@md20120]

Glad I watched this as I was just about to purchase the bars but didn't realise they did split the colours on video mode. Maybe a software update will fix it... Thanks for a great review

[@higashi6969]

personally i would never add the bars to the strips at the same time, they just fight each other with the colors and lights and mess up the immersion. If you go with the bars, pull them away from the wall just a bit so they are not face first into the wall, you want the light to spread out. i have the immersion 2.0 strips for my 65" and they work perfectly, soo glad i got them cause they work way better than i thought they would.

[@MrTekSuggest]

Thanks for the comment. I actually do position the bars slightly further back in normal use. But I wanted things to be a bit more discernible on camera. Because of some of the bars shortcomings described in the video, the bars do counter the strips in some situations when it really should be more fluid. The dual kits working as one is definitely not for every piece of content.

[@higashi6969]

@@MrTekSuggestunderstandable, that makes sense.

[@mousqy]

the bar cant display diff color ...i read somewhere they are coming with an update ..... i have both the led for my tv and the bar for my monitor

[@MrTekSuggest]

Agree, really hoping a software update can correct this!

[@RomboutVersluijs]

Yeah kinda weird because some of the scenes do allow it. But im not sure how that will look. THe lights are pretty close to each other

[@LosDoyerss]

Is it possible to mount a light bar at the rear top and rear bottom of the tv? I would rather have more color projected from the top and bottom.

[@clairoux.matthew]

can you use a USB C splitter to the control box if you want to run both the bars and strips off the same camera to make sure they are getting the same info?

[@babblebabble]

Still not sure... I have a 27" monitor. Strips or bars? Or both? I play games, watch things, simply do everything on pc.

[@Lylestyle-DIY]

Is there an Emersion Strip for a 32" or is the smallest 55" ??? Ordered the light bars for my gaming monitor, but after seeing this, i think the strips might be better, i dunno... Any Advice would be greatly appreciated please Folks !!

[@VexX_DreaD]

What if you use a USB splitter. Have the two products feed off of one camera. Extra cables but one less camera. Thats the first thing I would try when I get the flow pro bars.

[@MrTekSuggest]

Hey there, I actually considered this at the onset. And someone else actually asked about this a few days ago. Govee advises against this, and I worry that the excess power load could cause damage to the control box

[@VexX_DreaD]

@@MrTekSuggest I see but if each control box has its own power source then it should be okay. Only damage I can see is maybe the camera, by feeding two control units light data. Even then if nothing happens I could see maybe colour accuracy and response go down by possibly light info getting lost. BUT Shouldn't a splitter duplicate the info and send it down two paths? If that's the case, it's a possibility it may work without a problem.

[@MrTekSuggest]

@@VexX_DreaD Ah, I was thinking along the lines of eliminating the second control box all together, and feeding both power and data through 1 control unit. This is something that, as time goes on, I'll probably get brave enough to try. But as you mentioned, the control box that uses the splitter may become overloaded with data and cause latency, to not only the added bars, but now to the strips as well. Bringing the whole ship down.

[@VexX_DreaD]

@@MrTekSuggest Oh okay I see what you're saying. Well I plan on getting the bars and the upgraded tv lights so i will try it and let you know how it goes. If it works no problem you can try it yourself and share it with your subscribers.

[@MrTekSuggest]

@@VexX_DreaD Sounds good!

[@RomboutVersluijs]

Thats a pretty sick voice over! nice vieo man! Just got my Flow Pro today, it had a valentine deal. Had been checking Philips Bars but for simply "try and see if i like it" i found that way to expensive. So far i think the flow pro is nice. Im gonna try to use Velcro so i can switch between laptop setup and tv setup

[@RomboutVersluijs]

One thing i do hope they change or update, is the power output. it looks like its exponential. At 50% you almost at 100 already. there is hardly any difference. 1% feels like 10 already. I also hope they make a desktop app

[@RomboutVersluijs]

ONe other thing i dislike. The wire comes out at the bottom, in all their images they retouch out that wire. I wont push them down completely since that will stress the cable. They should putten a cut in the stands so the wire could pass through and wire it out from the back of the lights.

[@RomboutVersluijs]

One other thing i would suggest to them is lower the angle of the camera. With a lower angle it will capture more of the display. Currently it just grabs about 1/3 if your lucky. If its tilted down it will see the top corners better. At least i think. First time i saw these i could not understand why it could only be placed at the top. At the bottom its less distracting. Gladly they made that possible now. BUt i guess it doesnt really matter. I think the older version will work upside down

[@MrTekSuggest]

That’s a great idea!

[@RomboutVersluijs]

@@MrTekSuggest Well i need to clean the velcro on one side of all vibers. Even i do got 3M tape it wont hold properly. Went tking them off the tape doesnt hold. But i found another easier method. Because they are angled i put them side by side at the top of my monintor mount. I got a dell with a vertical stand. Then i use a hair rubber band to hold them together and the band goes over the top of the monitor stand. The bars rest on the cables which come through the hole. And because the are 45deg angle they glow outwords. It works perfectly !!! Its was even easier vs the Velcro setup :)

[@blargd]

So out of interest there's tips for larger displays, but what about smaller displays, I'd love to get something like this running with my 48" but the strips never work overly nicely because of being too long so it doesn't work out as nicely as it could, any tips for dealing with that?

[@DusselYorkCityStudios]

Could you put these behind you? Do they have to be near the computer? Reason being I would like to use them as back lighting during my streams.

[@foolofdestruction]

Can i use these horizontal taped to the back of the tv cabinet??

[@sebastiannavarretegonzalez6461]

Should the flow pro have a software update to have independent light for each light bar? @GOVEE contact support govee?

[@MrTekSuggest]

Check it out: kzbin.info/www/bejne/h5q9ZaWlm5KrnZY

[@sebastiannavarretegonzalez6461]

@@MrTekSuggest THZ!

[@anwarallie]

Do both cameras have to be mounted next to each other or can you mount one on top and the other at the bottom?

[@rychuu24]

Is it possible to use just one camera for LEDs and bars?

[@MrTekSuggest]

Sadly, they were not designed to be bridged together to allow for a single cam. Check out my previous Govee vids final verdict

[@rychuu24]

@@MrTekSuggest thanks

[@timgalletas3856]

Do you know if Govee sells additional mounts for the bars? Mine are attached behind my pc monitor and would like to be able to switch them back and forth for the tv or other rooms. Thanks.

[@MrTekSuggest]

You know, that’s a great question. I don’t believe so, but try shooting Govee a message via the App just to be sure.

[@RomboutVersluijs]

Im gonna use velcro and 2-sided tape. That way i can switch. For now i taped it hahaha just got the 2-sided tape and already have the velcro.

[@timgalletas3856]

@@RomboutVersluijs thats a great idea. I contacted Govee and unfortunately they don’t sell the adhesive mounts separately, so velcro will do the trick.

[@RomboutVersluijs]

@@timgalletas3856 I got 3M tape but when sticking it to the fabric part it won't hold great. I'm gonna try to burn the fibers away so the plastic is left. Hope thopds better. You could also make the stand yourself. I think small piece of would or something out a screw in it and it will also slide in that light bar

[@RomboutVersluijs]

@@timgalletas3856 I just tried a new approach. I got a del monitor with a stand. I know use a hair elastic band to hold them together, because of they are angled they glow outwards. That band goes ove the top of the stand and they rest on the cable. Works super nice and even simpler to use. Then I can stick those other stands on the back of the TV. So that's another approach 😎

[@azgard8914]

What’s the difference between the 2 light bars in both kits?????

[@chrispham8271]

Have you find a way to set up the immersion for Tv 43’’? Thank you

[@MrTekSuggest]

Hey there, 43” is a real stretch for this particular immersion kit, but nothing is impossible if you are determined to make it work. You’ll have a good deal of excess strip to “snake” behind the TV.

[@d.g1598]

Great review. I have 49 inch TV does the Immersion TV Light Kit gonna work?

[@maydaygoingdown5602]

I'm noticing on the tv light kit in your video that it doesn't produce yellow. And it doesn't track and place the other colours on the wall apart from BLUE.

[@jadonfyeet2271]

My tv is 43 inch Somoene know if it's possible to cut the strips? Because it says only 55-70 inch (Thank you)

[@BaRt175]

Could I use these lightbars on lg oled c1 instead sticking leds to the back of tv

[@raulrojas2576]

could you combine 2 sets of the pro flow bars or sync another non camera bars that are longer for the top and bottom for smaller tvs

[@TonyStark-fr3ns]

Hi again my man, so I have a question if I hook up two govee cameras do I need both set of light on back of the tv or can I just you use one strip ?

[@MrTekSuggest]

Hey man, if you RV is between 55-65, definitely go with the combo new model which only required a single cam for bars and strip. Review here: kzbin.info/www/bejne/o4rCinZjidmBp5o

[@TonyStark-fr3ns]

@@MrTekSuggest ok cool but I have the old govee and new one with bars so would it make a big deal visual wise to use 2 cameras or no? Thanks again for responding

[@Wootts007]

I wonder if there is anyway of splitting the signal from the camera so you would only need one of them???

[@MrTekSuggest]

Unfortunately that will not work

[@elijahhero3685]

What was the show at 13:50?

[@Automatizame]

The one color has benn coreected ? Were the two light has the dame color

[@MrTekSuggest]

Correct! Full video on the update here: kzbin.info/www/bejne/h5q9ZaWlm5KrnZY

[@Old_Wizard_Minis]

Where do you get all of the graphic demos that are running on your oled? Those are pretty sharp. Thanks

[@MrTekSuggest]

I couldn’t direct you to a single source fore everything unfortunately, but here’s a good one kzbin.info/www/bejne/gGXTfHRjip2jbMk

[@Old_Wizard_Minis]

@@MrTekSuggest Thank you kindly

[@apev4524]

If I am not using a sound bar beneath the tv like yours, do you recommend the camera for either light to be on top or bottom of the tv?

[@MrTekSuggest]

Hey there, I actually saw very similar perforce with the top or bottom mounted setup, as long as the TV was perfectly flush against the wall. However, when tilting the TV slightly downward (I have low seating), the colors performed better with a bottom mount, sound bar or not. Hope that helps!

[@CutTheTech]

What is the show playing at 13:41?

[@angelinemae6564]

I have a 59 inch TV. Is the flow pro a better choice?

[@r.q.8761]

Only bar for tv samsung 55 " ? Good or bad idea? Thanks.

[@MrTekSuggest]

I would go with strips for a 55. Install each section as far out to the edge as possible,

[@TonyStark-fr3ns]

So the bars don’t synce with tv like immmersion 2.0?

[@AdamMckeithan]

Got my bars setup the other day. Notice they doing same color on both sides. Was messing around and seen a update was out for the bars. Now they actually show correct colors on the tv like the leds strips.

[@MrTekSuggest]

kzbin.info/www/bejne/h5q9ZaWlm5KrnZY

[@RomboutVersluijs]

Yeah good point about splitting that color signal. We can manually do it, wish the video modes had it as well. Perhaps it doesnt have the power to it live?

[@KnowerofThings]

Hi Can you tell me where did you get those videos to test the lights? i think they look awsome

[@CodenameHawk1225]

Did I hear you say that you mounted the light strips on a 75 in TV? How did you do that when one kit only does a 45-55 inch tv?

[@MrTekSuggest]

Hey, I did not actually., I mentioned that a theory if your have a 75 or larger, is to install the strips much further away from the edges and to mount the bars on the sides to help with low brightness. Though I have not tested this is yet!

[@omegared04]

I have a question would the light bar be best for a 32 inch monitor

[@TheArmouryHD0]

Your voice reminds me of Greg Eagles (voice actor, metal gear solid and others) which is a great thing kept me engaged and nothing was too much or not enough. Great review

[@MrTekSuggest]

Much appreciated! Glad you enjoyed! I’m not super familiar, so now I have to look him up haha!

[@LadySamurai88]

Oh so these orange blocks are for measuring?

[@MrTekSuggest]

Hey! In a sense. They’re for calibrating for your screen size based on the position on the camera to make sure that the colors are represented appropriately around the screen

[@LadySamurai88]

@@MrTekSuggest Thanks! Sometimes i’m really blond 😂

[@MrTekSuggest]

@@LadySamurai88 No worries LOL

[@zacharykoplik6135]

This was super helpful. I’m really interested in the bars for my 43in tv but seeing that they can’t produce the separate lighting on each when in the video mimicking mode is disappointing. Trying to decide between going with the bars or the backlight which would mean trying to snake excess strip behind the tv

[@MrTekSuggest]

Really glad to hear that you found it helpful! My aim in making this video was to shed light for folks with dilemmas just as yours. With a 43 you'll definitely have to do some snaking, but it is doable. As for the bars, I'm hopeful that we'll get a few updates down the road to improve their video performance.

[@zacharykoplik6135]

@@MrTekSuggest thanks for the reply, in your experience has govee updated their products a lot? I would definitely be interested in the bars if there’s just some hope they might fix a few of the flaws.

[@MrTekSuggest]

Govee does keep the app fresh with updates and bug fixes. Something like this would require a larger update than usual, if it is indeed doable via software. I will say it is easier to dip your toe and perform a test run with the bars than it would be with the strips. Because once the strips are installed, it will be quite a hassle to remove and return

[@zacharykoplik6135]

@@MrTekSuggest thanks lots, I think I’ll go with the bars for now

[@raulmartinezLoveTranceLA]

I’ve been messing with the led box Thats being sold all over eBay as ambiance but that anbibox software that they use is not very intuitive. It works.. the lights are just washed out a bit. Give it a try they are only $30 would love to see your opinion on them

[@MrTekSuggest]

Interesting, the Ambibox. Some else actually mentioned this as well. But sounds like it’s more geared to PC?

[@raulmartinezLoveTranceLA]

It is but can be used with an android tv. And it seems like the app that’s used is way more user friendly on android

[@MrTekSuggest]

Interesting, I unfortunately don’t own an android tv though. My LG actually runs on their LG WebOS platform

[@dmo848]

I was scared of getting beat. I seen those ads all over but some are rip off s and u don't get what u think your getting.

[@Joehondasi07]

Can you buy 2 light bar kit and run it that way if you said something about it in the video I most likely miss it

[@MrTekSuggest]

Hey there, if you don’t mind two cameras, sure you can run two sets of bars for a single screen

[@Joehondasi07]

Ok I know it was probably a dumb question but just wanted to make sure

[@MrTekSuggest]

@@Joehondasi07 Not at all!

[@SMOXIC]

@MrTek, have you tried a single camera with a usb splitter to the two govee controllers?

[@MrTekSuggest]

Hi there, i’ve gotten this question a number of times. Govee does not recommend. Each control box is designed to only handle the data and power from one unit.

[@RomboutVersluijs]

@@MrTekSuggest I think he meant, using the camera signal and split that to both devices.

[@CodenameHawk1225]

Let me know if this works. I'm dealing with a 100 in projector screen that I'd love to light up this way.

[@RomboutVersluijs]

@@CodenameHawk1225 i think yo just try it or ask some you know which has a splitter

[@MrTekSuggest]

Hey fellas you can now use a single camera on the new model: kzbin.info/www/bejne/o4rCinZjidmBp5o

[@serpent86]

I just got the immersion kit! This helped me ton!. Thank you!

[@MrTekSuggest]

Awesome! Glad to hear it helped out!

[@djthashock]

Work this kit for 47" Tv also? Is there a way without cutting the Strips?

[@MrTekSuggest]

For a 47 you’ll have to snake the excess LEDs in the back

[@djthashock]

@@MrTekSuggest thank you. I appreciate that. I'll buy definitely one of the kid the 2.0 one

[@UlisesTehini]

Where can i find the video you're using in the min 8:14 ?

[@MrTekSuggest]

Happy testing: kzbin.info/www/bejne/f3TbdGiboLyhi8U

[@arisonie]

I have 43 in tv. Flow pro or immersion? Do they perform the same?

[@cliffchamberlin6851]

Which would you recommend for a 50 inch TV. I know you said the bars were ideal for 45 and below

[@MrTekSuggest]

Hey there, 5 inches isn’t too far from 55. If you can install the Immersion strips litter right on the edges, you maybe able to make it work!

[@cliffchamberlin6851]

@@MrTekSuggest ok thanks for the tip. I'm glad you made this video today I was looking for one talking about both kits.

[@aquilesruiz1]

What is the pyramid shaped stuff on your wall? and where can I get it?

[@TheFunkybudah]

Great vid. I have 1st gen will flow pro still work or would i need 2nd gen? Thanks

[@MrTekSuggest]

Glad you enjoyed! The Flow Pro Bars operate independently from the immersion light strips, so YES! The bars will work with the 1st gen light strips.

[@canoeshoe]

I'm confused, one of the video had the light bars mounted behind the TV?

[@MrTekSuggest]

The side by side shows the bars mounted behind the TV on top and bottom left hand side.

[@Samuel-pp8ti]

Hey for some reason my card keeps getting declined. It says declined due to unusual activity. What can I do?

[@dmo848]

Call your bank

[@E2STOPTV]

did it changed since the video? the light bars still not doing well as the Immersion? can you update?

[@MrTekSuggest]

kzbin.info/www/bejne/h5q9ZaWlm5KrnZY

[@E2STOPTV]

@@MrTekSuggest thank you very much!! i watched the video, when the screen is black the light bar is still using red? im not sure yet about what govve to get first i have 55inch tv

[@LocalHero2381989]

Hi i have a LG oled 65" which thing would be better?

[@lynnlister4977]

Can you use the bars and sync them with the immersion so u only need 1 camera?

[@MrTekSuggest]

There is a new unit now with a single camera for both: kzbin.info/www/bejne/o4rCinZjidmBp5o

[@rodgalley9209]

Do you need both the light bars and the immersion strip for the optimal experience? Or is using the immersion light strip enough by itself? What's the advantage of having both? Hiding one camera will be hard enough, two would be harder.

[@MrTekSuggest]

Hey there, both products are definitely unnecessary when used with a single device. The light strips are capable of immersing you on their own. Check out my final verdict for this video which highlights advantages of using both.

[@RomboutVersluijs]

IM windering if that even can be used both. I mean the flow pro device has a single USB input. Not sure if the immerset set has more inputs

[@rodgalley9209]

@@MrTekSuggest have you tried having the light bars behind the TV with your strip? That's the only way I'd do it. Having the bars either side of the TV like in the video just wouldn't work for me, I'm not sure I like that look. Having everything behind the TV may be overkill though even if you turn the bars down by 20% like you suggested. Living in Australia it's an expensive investment, I don't know for the price I'd see the difference having everything behind the TV.

[@crismora4708]

Wondering if this would work with an 86 inch tv I know it’s a stretch but was wondering if you’ve tried you’re 75 yet and what did you do

[@MrTekSuggest]

Hey there, I haven’t experimented with my 75 just yet. 86 is a tall task though. If you do decide to go with the immersion, and you feel that the LEDs aren’t as bright as you’d like, the flow pro bars may make a good addition

[@tommylopez8250]

What video were you using for the presentation? The one with all the colors.

[@MrTekSuggest]

Here is a good one: kzbin.info/www/bejne/faWZqH56o6xjrqM

[@jenniferzhang4530]

Thanks a lot for this video, I have finally got it setup. But I think I have some issues about the colour. When tv is white, the govee backlight appears blueish… any ideas? Thanks!

[@MrTekSuggest]

You bet, try lowering your saturation between 10-15%. And make sure that you don’t have any other rgb light sources nearby that the camera may be picking up. If you’re still getting a ton of blue, try moving the camera to the opposite position and recalibrate using this link: kzbin.info/www/bejne/bKq0h6GHmNmCjLM

[@jenniferzhang4530]

@@MrTekSuggest thanks a lot!

[@r-jam4320]

is it not possible using the phone software to sync a set of light flow pro bars with an immersion strip behind the tv in video mode, so that it only requires one camera? it is cheaper to buy them separately than the lightstrip+bar bundle but i wanted to ensure its possible to sync separate kits together in video mode otherwise I'd just pay the 50 dollars premium to get a bundle i know is guarenteed to work utilizing only one camera....

[@MrTekSuggest]

The latest release makes things a lot simpler kzbin.info/www/bejne/o4rCinZjidmBp5o

[@RomiWadaKatsu]

Is the sound reactive mode using your smartphone microphone or do the lights include a microphone? Using the smartphone's mic would add latency

[@MrTekSuggest]

Hey man, the immersion syncs music audio via an internal microphone on unit itself.

[@JPOGame]

Hi dude, Do you know if it matters at all it you have the camera somewhat to the left or right of dead center? I've got an 2 LGs and both of the IR receivers are covered if I choose to place the camera at the bottom which makes the remote completely useless. I'd be really thankful if you replied.

[@MrTekSuggest]

Hey man ,both of my cameras are slightly off centered, but I corrected for this in calibration. As Long as the camera isn’t too far One Direction where it can’t capture the full screen it shouldn’t be a problem. Also make sure to check out my video regarding this camera hack: kzbin.info/www/bejne/foXRgqWJpbasbKM

[@JPOGame]

@@MrTekSuggest you're an absolute legend dude thank you so much for replying. I have one last question and I promise I won't ask anymore, I've never placed a light strip before and I am gonna place it on my 65 inch TV soon. My question (that I can't seem to find anywhere btw) is where do I begin to place the strip? Do I just choose a side and start attaching it? Thank you so much again.

[@PumpkinPails]

Super in depth review. Thank you! I was considering getting these last week for the back of my monitors to prevent eye strain, but ended up getting the Hue Play bars instead because there wasn't enough information on these, yet. Although, I'm really happy with my decision these would have worked for my purposes especially now that I know they provide good warm and cool whites.

[@MrTekSuggest]

Super! Glad that you enjoyed!

[@nachomartinez8903]

The comparission part is wrong, because you usted the same tv for the two Products. The immersion is for tvs larger than 55 inches. And the bars are for smaller screens like computer monitors or a 32 tv.

[@concretecharlie51]

Where do you get those awesome demo animations?

[@Ricebow11]

Great video? I love the color changing ideas for movies and etc. how does this work with music. Is there a music sync options for like karaoke and etc? Another note - is the flow bar issue with them syncing the same color still an issue? At the time of this video, if one want. Other the flow bar and backlit, do I still need separate cameras?