MS02. [Siemens Motion Control] 9 Questions About Siemens Motion Control [2/10]

  Рет қаралды 22,949

Electrical Automation Hands-On

Electrical Automation Hands-On

Күн бұрын

Пікірлер: 43
@logitronicengineering3240
@logitronicengineering3240 9 ай бұрын
Thanks!
@electricalautomation
@electricalautomation 9 ай бұрын
Thanks for your super thanks!
@PatrickCatalini
@PatrickCatalini Жыл бұрын
Your videos are very informative and thorough. Well Done!!! Question? I am trying to replace an S5 Rack of IP246 Positioning modules, I want to use an S7-1500 -1PN with TM2 Posinput modules and analog output modules (Drive Analog Setpoints) to control positioning axes with an SSI encoder feedback. Would that be the most efficient way to go?
@electricalautomation
@electricalautomation Жыл бұрын
If you migrate your system from S5->STEP7->TIA Portal, then you could use the way you wrote. using TM+SSI encoder and analog out can build up a position closed loop control in S7-1500 and basically your migrated program will have a very minimum change. Another way is that using a servo motor and servo drive and using the 2nd encoder channel from the servo drive (e.g. S120 DRIVE-CLiQ module) for measuring your load side position feedback. Is this application come from Iron and Steel RH air O2 gun application?
@PatrickCatalini
@PatrickCatalini Жыл бұрын
@@electricalautomation No We are using it for automatic Size format change in the medical film industry. The IP246 module already has most criteria defined I imagine I can use things like incremental speed, software limits, Forward and Reverse Accel /Decel, etc. I am trying to upgrade incrementally so I am thinking of using FDL(open Comm) to communicate between the S5-135U and S7-1500 to transfer target values and other data.
@housamfraunhofer4473
@housamfraunhofer4473 2 жыл бұрын
ich habe Siemens S120 , power module 27A,600vdc, and Double motor Module 600 vdc , 3Ac 400v 3A: is it suitable to connect with motor 400vac , 6,7A ?
@electricalautomation
@electricalautomation 2 жыл бұрын
not recommended
@koffikoudjra2362
@koffikoudjra2362 2 жыл бұрын
Hi thank you for sharing this with us, may you help me with the "sizer, TIA Selection Tool Online/Offline" links, please ?
@electricalautomation
@electricalautomation 2 жыл бұрын
Please find the link for TIA selection tool new.siemens.com/global/en/products/automation/topic-areas/tia/tia-selection-tool.html
@koffikoudjra2362
@koffikoudjra2362 2 жыл бұрын
Thank you very much!
@tznalcn
@tznalcn 3 жыл бұрын
Isnt tia portal basic enough for s7 1200 plcs with servo drive? For 1 axis robots for example. Great videos btw
@electricalautomation
@electricalautomation 3 жыл бұрын
Yes, S7-1214 or higher can support 4 axis (single axis) control. You can use stepper motors or Siemens SINAMICS S210 servo motor as drive.
@tznalcn
@tznalcn 3 жыл бұрын
@@electricalautomation Is it not possible for example with 1211C DC/DC/DC + V90 + Siemens Servo? If not how could we make it happen? Maybe with ET200? Thanks for the answer
@electricalautomation
@electricalautomation 3 жыл бұрын
@@tznalcn Yes, it is possible. V90 is a good choice. some area cannot sale or buy SINAMIC V90. If you can buy V90, it is cost effective servo system, it also support profinet with s7-1200.
@tznalcn
@tznalcn 3 жыл бұрын
@@electricalautomation Hey thanks for the information. By the way as I said before great videos. If you are looking for a topic for videos, TIA Selection Tool examples for motion control would be a great choice! Have a nice day!
@gr.imadeddine324
@gr.imadeddine324 3 жыл бұрын
Intresting topic, great video, thanks for sharing !
@electricalautomation
@electricalautomation 3 жыл бұрын
Glad you enjoyed it! Thanks watching!
@siphongxongo8589
@siphongxongo8589 3 жыл бұрын
My King in Motion Control Salute....!!!!!
@electricalautomation
@electricalautomation 3 жыл бұрын
Thanks Bro.
@rahulravi4424
@rahulravi4424 3 жыл бұрын
I would suggest you to have another Playlist relating SIMIT....it doen't have good resource except the manuals from siemens
@electricalautomation
@electricalautomation 3 жыл бұрын
Thanks for the tip!
@braincrackz
@braincrackz 3 жыл бұрын
Hello can you share about alarm trigger and handling in siemens s7 300 cpus. If thats okay for you. Thanks
@electricalautomation
@electricalautomation 3 жыл бұрын
Hello, do you mean using Siemens HMI to show the alarm, and the PLC is S7-300? It would be coming month but not recent. I am working on the motion control and communication series these months. Thanks for watching!
@braincrackz
@braincrackz 3 жыл бұрын
@@electricalautomation not really in the HMI because i am not that yet but the logic i made in DBs can be use in HMI for future use. I only focus on the logic i made a logic for alarm trigger using bools and the problem is i want to make a reset that is in MOVE because i cannot afford to use so TONS of Reset Bit. Using 300 cpu. The idea is splicing the word command into bit in 300 its not possible.anyhow i love watching your videos its more advance
@electricalautomation
@electricalautomation 3 жыл бұрын
I roughly see what you talked about. From my programming style, using the bits from a word from individual alarm, then compare this "word=0" for alarm summary.
@fernandocadena_
@fernandocadena_ 3 жыл бұрын
Great video!
@electricalautomation
@electricalautomation 3 жыл бұрын
Thanks for watching!
@ahmedatef5563
@ahmedatef5563 2 жыл бұрын
Amazing topics
@electricalautomation
@electricalautomation 2 жыл бұрын
Glad you like them! Thanks!
@alialshammary7188
@alialshammary7188 9 ай бұрын
thanks for sharing
@BallAndBeam
@BallAndBeam 3 жыл бұрын
Great video. Thanks.
@electricalautomation
@electricalautomation 3 жыл бұрын
Thanks watching, welcome!
@tarik.b1400
@tarik.b1400 3 жыл бұрын
wonderfull job thank you
@electricalautomation
@electricalautomation 3 жыл бұрын
Thanks! This is one of the play lists I am proud of. thanks for watching!
@industrialautomationkotttu8841
@industrialautomationkotttu8841 3 жыл бұрын
Keep going
@electricalautomation
@electricalautomation 3 жыл бұрын
Thanks! will do! I am working on some videos about DC Motor positioning control by using S7-1200. They will be launched soon.
@Suppy-m7r
@Suppy-m7r 20 күн бұрын
❤❤
@sotanluy2240
@sotanluy2240 Жыл бұрын
thanks your so much, video very interesting :>.
@electricalautomation
@electricalautomation Жыл бұрын
Glad you liked it!
@abujafor7915
@abujafor7915 3 жыл бұрын
Thanks
@electricalautomation
@electricalautomation 3 жыл бұрын
Welcome
@kalegamingtv2200
@kalegamingtv2200 10 ай бұрын
from this video, i know, i bought wrong device for synchronize position
@electricalautomation
@electricalautomation 10 ай бұрын
Hopefully the video could be helpful. Would you pls let me know which drive and PLC you bought, and which kind of application you want to do
MS03a. [Siemens Motion Control] TIA Portal Single Axis Control - Project Introduction [3/10]
4:38
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
MS05b. [Siemens S120 #1] SINAMICS S120 Configuration and Commissioning via STARTER
31:39
Electrical Automation Hands-On
Рет қаралды 35 М.
MS03b. [Siemens Motion Control] TIA Portal Technology Object (TO) Configuration [4/10]
19:18
Electrical Automation Hands-On
Рет қаралды 25 М.
MS05e. [Siemens S120 #4a] Setup PROFINET Connection Between S7-1500 PLC and S120 Servo Drive
11:22
Automation Tasks: V90 Positioning Axis Tuning
7:54
Siemens Knowledge Hub
Рет қаралды 48 М.
Motion Control has never been so easy
10:41
Siemens Knowledge Hub
Рет қаралды 33 М.
This open problem taught me what topology is
27:26
3Blue1Brown
Рет қаралды 282 М.