MS300 LIQUID POND LINER FAILS

#ms300 #liquidpondliner #diyfail
Join me in today’s video as we go through the failure of the MS300. Well i say failure, it was more so how I had applied the ms300.
As i had a pin hole the inevitable happened. A leak. A MASSIVE LEAK. However ms300 came to the rescue and dropped me three more tubes off.
Watch how i repaid the hole and prep the area for some more coverage!
Join this channel to get access to perks:
/ @thebaldingreefer
The brief video above will show why becoming a member is an additional way to support the channel growth.
I want to be able to put more content out that is more raw in its nature. What i mean by this is my typical shoot from the hip style, but more uncut, unedited version of what i am up to.
Behind the scenes of video reels that dont make the main channel, or dont make the cut to be in a fully fledged video. Think about it like this, you get to read my life diary, as its happening live!
There will also be import livestreams all dedicated to channel mebers that want to get down to the nitty gritty of what happens behind the scenes of running a koi farm.
You support means the world to me, and i would not be where i am today without you guys!
Big Love,
TBR

[@ImCuteButNotS3xy]

enjoyed this vid darl .. and neither did it fail nor did you !! its all a learning process and your doing amazing !!!!

[@TheBaldingReefer]

Thank you mate, hopefully the next episode it will be full

[@hippo5346]

Good honest review , Jack . As an average DIYer , I think the problem I`d have with this product is applying it evenly . Plastering is harder than it looks and if I was going down this route , I`d prefer something that you can paint on and ideally changes colour when it dries , so you can easily apply extra coats .

[@TheBaldingReefer]

Great point!

[@KoiCarpKyle2393]

Nice easy fix tho jack 🤞 bang on dude 👍🐟

[@TheBaldingReefer]

Yep should be on the next episode mate

[@user-oi2qi5vo1r]

Very interested in this and would welcome your thoughts on how effective it would be iused on a block pond? And if there is a way to apply it more evenly to get a better finish? As i am looking at going the route of liquid pond liner over fiberglass due to the size of my pond and the cost of having it fiberglassed. Would welcome your thoughts and ideas? 👍

[@asterixborden-koi6881]

I was more concerned about the bracket’s on the ply not holding up Interesting video Jack 👍

[@TheBaldingReefer]

There only there to hold them down, water will do the rest mate

[@CBersPond]

Good video Jack 👍 Hope you're all well.

[@TheBaldingReefer]

Thanks, you too!

[@petermartin7971]

Good video if you don't have problem s you don't learn 👍😗

[@TheBaldingReefer]

Very true!

[@lyonscultivars]

Gutted. Let me know how easy it is to repair buddy. Was debating trying this stuff after watching you aplying

[@TheBaldingReefer]

Very easy mate, I show it all on the next episode

[@lyonscultivars]

How does it act when over bonding, does it stick to its self as good or better thsn it does the wood? Thanks jack

[@lyonscultivars]

​@@TheBaldingReefermuch aprishiated jack bud

[@TheBaldingReefer]

@lyonscultivars sticks to itself just as good mate

[@lyonscultivars]

ile definalty be aplying it pre warmed and ile likly also try and preheat the mancave so surfaces don't cool the ms300 as it's aplyed. Looked like a good innovative product. Basicly a box liner without any slack if it holds up to time. Reguarding warrentie its likly hard fornthe ms300 manufacture to give what we would call a fair warrentie due to self application as its not a sheet product and the build being vital they would struggle backing watertight for 5 years etc without many fullbacks.

[@user-zd7jj1nq9y]

Hey jack we are in the middle of a pond build and we are having problems with ground water coming thru the blocks.can this ms300 be applied to a wet surface or would the blocks have to be fully dry first?we were planning on fiberglassing the pond but we are having problems keeping the water out.would you have any other suggestions solve this problem?thanks

[@TheBaldingReefer]

Hi mate ms300 and fibreglass need to be bone dry, if your struggling with ground water mate my suggestion would be a box weld liner, far quicker and no stress over walls being damp, you can still fit a box weld with a window etc

[@user-zd7jj1nq9y]

Thanks jack will look into that

[@hippo5346]

Hi Mate . I had exactly the same issue . I was going to use pond paint , but couldnt keep the water out . I ended up getting it professionally fiberglassed . Id say that the extra few hundred quid it cost me was the best money I spent on my pond . They knew all the tricks and got the job done in 1 day . Still holding water 8 years later . Get the professionals in !

[@edanderson859]

Wouldn’t of happened if I had been there 😂😂 maybe we could of done my pond with it, but that would be a big job 😂😂

[@TheBaldingReefer]

This is very true! But it should all be fixed in the next episode ;)

[@Devilmaycry138]

Lol f this shit its expencive and it can fail just get a box liner made this aint worth the hustle if it was cheaper yeah but not at the price it is right now.