MSA Altair 2X-CO Calibration and Bump Test Guide

MSA Altair 2X Calibration video
If you have a problem during your calibration, give us a call or send it in for repair here:
idealcalibrati...
To Calibrate this monitor:
1. Turn on, wait for startup process
2. Long press button, wait for ZERO screen
3. Press button to zero
4. Wait for SPAN? screen
5. Press button, attach tubing to monitor
6. Wait for span to complete, remove tubing
7. Congrats, you're done!
Calgas Used:
60ppm Carbon Monoxide
Buy the calibration gas here:
idealcalibrati...
Regulator:
0.25lpm Fixed Flow C10 Nickel Brass
Buy the Regulator here:
For Diffusion (Non Pumped) - idealcalibrati...
If you have any gas monitor or calibration gas questions, please feel free to call us at 1-734-956-0539 or to email me [e-mail]. We'd be happy to answer any questions you have.
Please see our websites at:
www.idealcalibr...

[@Joe_Heinz_BJJ]

Hello, where can I purchase the cylinder and the regulator at?

[@Idealcalibrations]

@@Joe_Heinz_BJJ hey Joe, cylinder and regulator are in stock on our website, www.idealcalibrations.com

[@tymurphy70]

Do you know if any differences exist in bump testing between this model and the MSA ALTAIR single gas detectors?

[@Idealcalibrations]

It depends on what model you have. If you have the Pulse, you can do a bump test where you exhale on the monitor to test it. Otherwise, it's fundamentally the same for bump testing.

[@yinyang4482]

There is a way to change the SPAN point to 45ppm?

[@Idealcalibrations]

There is, but you need to purchase the IR Link from MSA and download the MSA software from their website