MSFS iniBuilds A310 / A300 Tutorial | Full Flight

[@TiJayFLY]

Although this video features the A310, the same procedures can also be used for the A300. To get the most from this tutorial, please watch it *before* you fly! Pause and take notes along the way, rewatch sections as necessary until you're comfortable, *then* fly the airplane using the notes/checklist that you created :)

[@infinitewisdom9619]

Great video! I love it how you manage to explain the basics of a full flight in 8 Minutes while other channels need 30 to 60 Minutes of explaining how to configure a plane for a cold and dark start, a departure or an approach.

[@TiJayFLY]

Thanks, I always aim to get the basics across quickly so people can just go fly :) The other channels serve a purpose for those who want to get more in depth, but I’d wager that most folks (especially those on Xbox) would rather spend more time in the air than on the ground (or watching extended “how to” videos).

[@infinitewisdom9619]

@@TiJayFLY exactly.

[@barthvapour]

Completely agree. The irony is that cold 'n' dark tutorials aren't even that useful because the sim checklists will literally show you what to do for almost every aircraft. And if you go on the forums and admit that you don't care about a C&D start and just want to start on the runway, they scorn you as if you had suggested molesting a goat or something. I LIKE starting on the runway and I don't care if that's heretical.

[@harrisfafoutis5148]

The fact that this plane was the reason to learn the fms is astonishing

[@franklinfjm]

As always I appreciate your short and straight to the point videos! Thx!

[@oucho1187]

the fact you can do this in 8 minutes makes you such a good youtuber/simmer. Most if not all channels make 30 minutes plus videos of the same thing

[@nshepherd1987ify]

Very consise tutorial as always 👍 As someone who is new to flight sim with the xbox release, your guides are my go to before I fly any bird for the first time.

[@TiJayFLY]

Thanks, that means a lot! 😁

[@muhammadtareen4768]

Far far better than the simplified tutorial from MSFS itself. Excellent video, thank you so much for making this video.

[@antonymerlyn539]

It was your video that got me going in the Fenix A320 and will do same in the A310. Thanks for keeping it simple!

[@Nismo8787]

came here to learn about the new 300, worked like a charm! thanks again for the awesome/quick videos! keep up the great work!

[@TiJayFLY]

I figured it would be similar - good to know!

[@mblxperiment]

Hey this got me flying the A310 all over the place today! Thanks for the great info!

[@stoks3452]

Another banger, you're the best!! Hats of to you sir!

[@calamityairlines9762]

Al the information needed , thanks dude . I'm off to try the A310

[@TiJayFLY]

Happy flying! 😁

[@allugg7243]

Wow thanks! This is easiest and fastest and working tutorials, I made my first nice and successful flights and landings with that bird!

[@danielsimpson3277]

Ive followed everything you've done in this video, flight plan, weights, the whole lot. And the plane doesn't catch the glide slope, or when it does catch the glide slope, the wheels touch the runway the plane goes into toga and proceeds to take off before the front wheels touch the ground. And i have followed everything you did in this video.

[@TiJayFLY]

Idle the throttle when you hear the “retard” call-out and it won’t go around. I think also you may be approaching the glide slope too high, but please feel free drop by the discord in description and post a video so I can diagnose

[@server2307]

I had fun with this plane, let the liveries build begin:)

[@theAKmooseburger]

You’re the best TY once again 😊❤

[@cubetamalvada893]

I always pre-set the NAV button, yet it always goes to whenever the plane wants and not the route. I noticed that in the outside view, when the HUD pops up and I can see the compass, the plane tends to follow a blue mark instead of the purple one it needs to follow.

[@TiJayFLY]

That does sound like heading mode instead of nav. Does the PFD say NAV or HDG?

[@TurpiAviation]

For some reason whenever I try and turn on Nav mode it just turns itself back off. Do you have any idea why?

[@TiJayFLY]

@@TurpiAviation probably just a gap in the flight plan. Post some screenshots of your flight plan page on the discord in description

[@abuabdullahm3981]

You are creative, good luck

[@antoniolopes4675]

Hi TijayFLY! Any idea on why T/C doesnt disappear in the fms after the plane has reached it?

[@TiJayFLY]

Do the MCP and FMC CRZ ALT altitudes match? Edit: I misread your question. It won’t disappear from the FMS until it naturally scrolls off the page.

[@abbasiiftikhar34]

quick question, how do I find the CRS and ILS frequency for the intended airport??, Im a newb

[@TiJayFLY]

If you click onto my channel there’s an FAQ video at the top. In there is a timestamp for finding ILS on various planes - for the a310 you’ll want the “web” option

[@blueavocado267]

Hi ! I have similar issues with Ceejay and dubbed 990. After I take off, turn on autopilot with NAV mode, it follows the first and second waypoint in the flightplan. However it does not follows the flightplan while flying to the third waypoint, it just fly straight. I tried what Ceejay wrote in his comments, and it’s not working. Even when I press DIR on the FMS and choose Direct to the next waypoint, it still fly straight. There is no discontinues in flightplan, I feel quite confused about this……

[@TiJayFLY]

Is it a MANUAL or VECTORS waypoint? If not, drop by the discord in the description and send a video link (you can upload to YT as unlisted)

[@blueavocado267]

@@TiJayFLY Finally I found out how to solve this problem . Some people raised the same issue in inibuilds' forum. The moderator account in this forum give us a solution, which is turn off auto-rudder, assisted yoke, AI-auto trim, and assisted controller sensitivity in the assistance options. After turn-off these functions , this plane can precisely follow the flight plan. Cheers !🍻

[@yourlocalavgeek72]

@@blueavocado267 where do you find those options

[@zdp-189]

As a minor detail on FCU, I vaguely remember reading somewhere inibuilds said that cost index doesn't work right or something? To leave at default, zero, or 40. Why, I dunno? Anyone else remember? It gets confusing when I fly over 30 diff planes in sim, and some auto land ILS airliners all have different quirks that work as intended/or dont...then with so many different updates all the time, I can't keep up on which small instrument glitches were rectified or made worse. I mean on gross level it works fine, but for fine tuning, trying to do it real to life- it gets so hard sometimes keeping up with inconsistencies!

[@TiJayFLY]

Yup, that’s why I just feed every plane 100 every time. I’m here to fly and enjoy the experience, not tie myself up in the idiosyncrasies of every developer’s different implementations of identical systems.

[@xXCannYXx]

Hi could you do a video for the ini a300-600 too with cold and dark ?I find your short videos really helpful

[@TiJayFLY]

Let me know if this a310 procedure works for the a300 kzbin.info/www/bejne/r5fQhH2srqymnMUsi=ScF-kL1Mg1RSI5oT

[@xXCannYXx]

@@TiJayFLY sry I saw the video but didn’t saw the comment that it works for the a300 too thx

[@chrismas123456789]

Where did you find the runway heading, please?

[@TiJayFLY]

apxp.info/

[@HELERsx]

Lol what a great short turtorial!

[@dubber990]

I’m sure I have done everything correctly but my plane flys straight and doesn’t follow the nav nor does it show up on vfr map

[@TiJayFLY]

Check your FPLN page in the FMC. Make sure your plan is complete with no discontinuities

[@dubber990]

@@TiJayFLY I have done that and nothing I am on Xbox btw

[@GeorgeBuzi]

get closer to your nav route by flying hdg and then hit nav

[@fredschriks8554]

Thanks for the video.

[@Andysus123]

Good tutorial! Btw do you know how to enter the cabin and get seat view?

[@TiJayFLY]

Yup just move the camera around using the default camera controls (they’re listed in the Sim Options) and set up your preset views (Ctrl Alt + Num)

[@muhammadtareen4768]

my plane doesn't keep the route it just keeps going left, right while holding the altitude and doesn't follow the GPS, any help how to fix this issue? thanks

[@TiJayFLY]

Is the NAV light on?

[@muhammadtareen4768]

Yes, the NAV light is on

[@TiJayFLY]

@@muhammadtareen4768 is the VOR - NAV - ILS toggle below the FD toggle switch set to NAV? Is there a complete flight plan in FPLN? Are there any discontinuities, “MANUAL” or “VECTOR” waypoints in the FPLN page?

[@muhammadtareen4768]

@@TiJayFLY Yes the switch is on NAV, there's a FP in FPLN, there was one discontinuity that I cleared, I'm not sure about the manual or VECTOR waypoints.I guess the flight plan from the world map could be a pb. I was flying LELN-LEMD, RWY23, SID ZMR1H23 and at destination LEMD, ILS32LW, ZMR4A-18L, ILS f of 109.90 and course 323deg. What I did is exactly flew your route and everything worked just fine, no issues in route following or autolanding. But one thing i quite strange, it gave 5000ft the last altitude as compared too your FPLAN which was 2400ft, but the good thing is that it works just fine now. Thankyou so much once again for the video and the help.

[@TiJayFLY]

@@muhammadtareen4768 final altitudes take terrain and airport elevation into account. You’d probably land in a mountain at 2000ft in some areas ;)

[@HELERsx]

One question: Isnt it possible to start from a runway without a SID? Or what am I doing wrong? I set up the flight plan, everything looks fine but when I took off and enable the AP with NAV-Mode etc (Nav is also shown in the PFD) it doesnt follow the flightplan. But when I press DIR on the FMS and chose Direct to my first waypoint after take off it starts flying to the waypoint. Once it reached the waypoint, it starts following the Nav-Route without problems. Where is the mistake?

[@TiJayFLY]

Short answer yes it is possible, long answer is it can be a little picky with direct departures. I believe this is prototypical behaviour for Airbus. Direct arrivals are generally fine though.

[@HELERsx]

@@TiJayFLY Thanks for your answer. I never had problems with direct departures in the A320 or PMDG 737 so I was wondering...Is it a normal behavior for the 310 or is the direct departure not the real problem? This is really annoying but I will try a SID tomorrow.

[@TiJayFLY]

@@HELERsx it could just be the way the systems are implemented in the sim, I’m pretty sure iniBuilds uses their own LNAV code. This may be better answered by someone on their forum or Discord etc :)

[@belialworf2406]

Suppously this is an study level aircraft, and remember that the A310 is a very old aircraft, the systems that this aircraft have are crap compare to relative modern aircraft like the a320 or 737, so the navigation system is different with the a310.

[@HELERsx]

@@belialworf2406 Thank you. I wonder if its a Bug in my Version or does the plane behave the same in your MSFS.

[@JoeDFWAviation]

I saw you didn’t program your weights into the fmc…..I guess you can get by without doing that? Lol I just want to get in the air as quickly as possible

[@TiJayFLY]

Yeah you can get away with not doing it. It won’t let you go to that page once the engines are on / from a runway start anyway. If you do cold and dark, again you don’t have to enter them, but if you do you’ll get more accurate fuel and weight predictions enroute.

[@simplytheworstx3464]

Great tutorial. I tried landing at the end of my flight and the ILS would not lock the LOC or G/S, im not sure why I've tried twice at different airports also

[@whiffy506]

Same. I lose the GS and the auto throttle disengages leaving me up to stall.

[@TiJayFLY]

@simplytheworstx are you changing nav source to ILS before hitting LAND? It’s the toggle switch below the FD. @whiffy this sounds like your speed is too low for your config/airplane weight.

[@simplytheworstx3464]

@@TiJayFLY yes I have done both of these, I will try again this evening

[@j_london9791]

Same here the only plane I have that the throttle seems to accelerate then slow down without me touching it??

[@TiJayFLY]

@@j_london9791 what’s the target speed and config? Are you at a reasonable landing weight? Full flaps and gear down?

[@ivanbeinner7143]

Can you help me I can't turn the autopilot off warning of

[@TiJayFLY]

Set an AP Disengage hot key or joystick button. Alternatively it’s the red button on the yoke

[@ivanbeinner7143]

@@TiJayFLY thank u

[@TheGFBats]

Do you know why my nav and profile modes can't be activated?

[@TiJayFLY]

Usually an incomplete FPLN or INIT page. Check your flight plan route is complete end to end with no discontinuities.

[@TheGFBats]

@@TiJayFLY I'm using the FSs flight plan, selecting both places - departure and arrival. When the game loads, profile and nav modes do not turn on when I click on them. :(

[@TiJayFLY]

@@TheGFBats flight plans do not feed through from the world map. You need to program the FMC - I do make a point of saying this in the first 20 seconds of the video 😉

[@jacinthepoirier4218]

how did you get ILS because I have it don't have it on a310 I'm on xbox

[@TiJayFLY]

Xbox version will have it… it’s the same as far as I’m aware.

[@CMDRRustyDog]

Your cost index shouldn't be over 50 for this plane. I'd say 25 or 30.

[@TiJayFLY]

If we were doing perf calculations, for sure. This video is just a quick start guide to get new players flying without anything too complicated. Once they’ve learned the basics and had a successful flight, they can get into all that stuff with longer, in-depth videos from other creators :)

[@xxjuycedxx6650]

Wait do you need gear down for ILS ? i did it the same way but it didnt follow the ils somehow :\

[@TiJayFLY]

It should still follow it, but it will shout LANDING GEAR at you the whole way down. Failure to intercept and follow ILS is likely caused by something else.

[@xxjuycedxx6650]

@@TiJayFLY hm need to investigate that, thank you mate :)

[@joshuadunston774]

When i disconnect autopilot on final the autopilot disconnect sound keeps sounding repeatedly i cant get it to stop what am i doing wrong

[@TiJayFLY]

Hit your hardware AP disengage key (you can configure a hotkey) or the red button on the yoke to silence the warning

[@joshualamb4572]

I auto pilot instantly dis connects when I enable it when I’m flying

[@TiJayFLY]

There could be many reasons, feel free to drop by the discord in the description and share a video

[@BW_1600]

When I activated NAV it turns off automatically, anybody got a solution for this?

[@TiJayFLY]

Do you have a flight plan?

[@JacobBasheer]

From a runway start, the instruments are all powered down and there is no electrical power, but the engines are powered on. Edit: There is electrical power but the instruments are dead

[@TiJayFLY]

Yeah I’m seeing the same thing now. Even clicking “ready for takeoff” on the EFB does nothing. Maybe worth checking the iniBuilds or MSFS support pages for an answer.

[@JacobBasheer]

Yes, somehow it works now, for some reason, the vertical deviation thing doesn't show up though.@@TiJayFLY

[@Residentrounds]

does the plane have a pause before td feature?

[@TiJayFLY]

There doesn’t seem to be one on the EFB

[@Residentrounds]

@@TiJayFLY bruh. What were the devs thinking 🤣

[@TiJayFLY]

@@Residentrounds I’m sure they’ll add it if enough people request it ;) it could just be that I haven’t found it… no doubt someone will correct me if it does exist!

[@Residentrounds]

@@TiJayFLY No dude, i had this flight planned with my friend. HEL-JFK Pan am. Ive been looking through every page of the fmc and still nothing. Really disappointing

[@ItzChickenYall]

@@Residentrounds well it is a freeware

[@kfcextracrispy9273]

How do u turn off auto throttle on it ?

[@TiJayFLY]

A/THR on MCP or assign hardware key/joystick control to Disengage (or Toggle) Autothrottle. I think it’s called Autopilot Speed Hold in the MSFS options

[@yourlocalavgeek72]

I filled my flight plan in the fmc but it wint follow my flight plan

[@TiJayFLY]

Post a video if possible so I can take a look

[@yourlocalavgeek72]

@@TiJayFLY I cant But i followed all the steps in your video checked everything in the fmc but like a few waypoints later it goes off course

[@TiJayFLY]

@@yourlocalavgeek72 feel free to drop by the discord in the description and post screenshots of your FPLN page

[@Romanov3579]

Got it for the xbox series x wow the planes are expensive

[@TiJayFLY]

They traditionally are. Some planes are worth it, because they're not like normal DLC - they're high quality simulations of actual aircraft and systems. Others are just taking the p*** with their pricing, so make sure you watch reviews before buying anything :)

[@mb944]

What does the profile switch do?

[@TiJayFLY]

It’s another name for VNAV (vertical profile)

[@mb944]

@@TiJayFLY ohmygod y don’t they put vnav. That just confuses everybody like me

[@JasonBelcik]

Mine is not following the flight plan. The line is gray

[@TiJayFLY]

Is your flight plan complete and with no discontinuities?

[@TiJayFLY]

@Cooper J try simplifying the plan or copying a real world route - feel free to drop by discord and post screenshots and video for more advice

[@salvadorcarrillo5113]

I can’t engage the nav bottom

[@TiJayFLY]

Check your flight plan. Ideally should be from runway to runway with no discontinuities

[@elliottrawr]

Nah button doesn’t work. It turns on then turns off again

[@TiJayFLY]

Some error in your config - it’ll disable if something isn’t set up right. Check FMC flight plan and INIT page is complete.

[@davidh7280]

Childish attempt at a complex sim. Need to o look at Captain Sim. At least everything worked 😃

[@TiJayFLY]

Where is this mythical Captain Sim aircraft where everything works? 😉

[@columnedfox5508]

this plane is SUCKS on the console, it won't follow the stupid flight plan i set up

[@TiJayFLY]

Did you program the route into the FMC? It won’t follow world map plans automatically, you need to input them at the gate or runway

[@columnedfox5508]

@@TiJayFLY hmm i'll have to check

[@ESPirits87]

I can't press the NAV or Profile button, nothing happens, i fly casually and just want to engage auto pilot but without NAV it doesn't follow route.

[@TiJayFLY]

Do you have a route in the FMC?