MSI Velox Case Review, an MSI comeback on Airflow?

[@WootDini]

Website Article: www.wcmedia.co.za/review-of-the-msi-velox-airflow/ Visit and Explore our website: www.wcmedia.co.za Thank you all for your continued support of our content!🙃

[@han118]

at this particular moment 6:48, it's so rare for me to find content creator to actually shows b-roll of side of the cases that has no psu cover. and smoke test? this is one of the best pc cases video review ive ever watched

[@acapniamaxtor]

Using one right now. For the front fan flaw i just made a custom fan filter.

[@jasonyu-gi-oh1056]

This must be a nightmare to clean the dust off after a few years

[@aweeeeeeeeeeeeeful]

lmao then clean it sooner?

[@dreamEnd]

Can you even fit big GPUs (4070ti or above) if you have fans or even rads on the side? The specs said that it can fit up to 380mm, but it didnt specify if you have a side fans installed.

[@WootDini]

Heya I have all fan slots installed and I have a 4090 installed (aio 4090 too). Clearance is a general issue I have with the case but it does accomodate

[@VGShrine]

How did you manage to place the dust filter in the front with the front fans outside? Thanks in advance!!

[@WootDini]

Heya :) I didn't. I mentioned in video that it was one of the concerns in the case for me :)

[@VGShrine]

@@WootDini thanks for the reply. I have similar hardware with the same GPU in a Sekira 500P and the temperatures are awful as that case has zero airflow capabilities. Because of that I'm thinking in moving my hardware to this case so I was wondering how was the compatibility for the same components. I think I can buy a generic dust filter and place it in the front cover for that purpose as another user mentioned here in the comments.

[@VGShrine]

@@WootDini By any chance, do you have the recording of the building process so you can uoload it? I would like to see the process to have it as reference. I would truly appreciate your help. Thanks so much!!

[@fexico1412]

Hello friend, can I install e-atx motherboard to this case? In official web site written only till the atx. But in markets e-atx compatible says. If I use e-atx, is it possible to use 360 aio in both positions? Thanks a lot.

[@WootDini]

Heya So I would not put an e-atx in this chassis even if it could support (which I don't think it can). Further 360 can go top but side no (at least not simultaneously) If you doing an e-atx I would not recommend this case at all. There is almost no clearance

[@OwlyEagle]

Building something similar, what screws did you use for the radiators?

[@WootDini]

Sorry for delay Ones that came with the aio

[@OwlyEagle]

@@WootDini mate, I have no idea how you installed the bottom GPU AIO fan.

[@WootDini]

@@OwlyEagle it was a squeeze. But gpu aio went in first.

[@OwlyEagle]

@@WootDini i guess the 100r velox glass front panel is different. Im a few mms tight unable to screw bottom fan while the top gpu aio fan and radiator are secured in place. Also front fans are mounted in the front side. Also a 4090 suprim liquid

[@donno1967]

Maybe 120mm low profile rgb fans for the front ?

[@WootDini]

Good idea :) but still not enough clearance. Also LP fans dont put through enough pressure to fill the case and create a push

[@donno1967]

@@WootDini Thanks, will have to look for other options then.

[@BlakeWighard]

One year ago

[@amarson2322]

I want to insrall rtx 4080 can it fit ?

[@WootDini]

It will :) I have 4090 in mine

[@bismarckrathod5890]

can this fit 7900xtx?

[@WootDini]

Fit a 4090 so don't see why it would not

[@bismarckrathod5890]

I really like this case but I'm worried about airflow because I live in hot weather country. ​@@WootDini

[@bismarckrathod5890]

​@@WootDiniwhich one of these have best airflow ? Deepcool ch560 Montech air903 max Or this MSI Velox 100p

[@WootDini]

@@bismarckrathod5890 only tested the velox but velox and deep look best