MST INTAKE V2 - The BEST intake to date! - Updated 2 Piece GR Corolla MST Cold Air Intake

Shop Aftermarket Performance
www.grhatch.com/ or a90partsplug.com/
MST GRC V2 Intake
speedindustry....
GRC - Engine Cover Sticker Kit
speedindustry....
Follow us on all socials: @speedindustry
speedindustry.com
/ speedindustry
/ speedindustry
/ speedindustry
* All liabilities resulting from the use of these products lies solely with the purchaser/user. Please use it at your own risk.
#speedindustry #corolla #GRCorolla

[@BlackWater6937]

Probably the first intake for this car that actually is a good design.

[@CG-yh6js]

I really like the design of the shroud

[@frankybeans1872]

That’s the coolest intake I’ve ever seen 😉

[@B-rad303]

I would get the clear plastic airbox cover done in PPF on both sides to keep it perfect and scratch free.

[@Speedindustry]

great idea

[@B-rad303]

@Speedindustry I did it on my truck and it's great! That plastic is designed to scratch lol

[@rtauvette]

This is wicked. Hopefully pricing won't be too high.

[@Speedindustry]

Pricing is on our site :)

[@cflip2x]

Careful to not over tighten the hex bolts. Did that for my sxth and cracked the plexi. I did add some thread locker and some rubber washers and backed them 1/3-1/2 turn.

[@Speedindustry]

great tip for everyone

[@mengx94]

Good ol back off a quarter turn 😂

[@Danactivo]

Sound better than the first version

[@Speedindustry]

It's DEEP

[@PaintflowException]

Wow this looks solid. Any chance for a Dyno run with the new intake?

[@gordie2377]

Boy, I wish they had something like this for the 2019-2022 Non-Aspirated Corolla XSE Hatchback, 6 Spd. M/T, w/the 2.0L engine. I considered buying a new GF, but w/interest rates so high, I said forget about it, at least for now.

[@JoeyD215Philly]

DM’d the IG page just now 😂

[@Speedindustry]

got ya added to the list

[@user-gj8rq7vp7j]

Daaaaam man, how about a little detail on how to insta this intake for your customers, full detail video not speed try it 😅

[@bowser1252]

Definitely interested! I already have the V1 intake so I really hope theres and uograde kit

[@Speedindustry]

There will not be - The only part that is the same is the rear tube , better option is to sell what you have complete so someone can use it and DM us for a loyal customer purchase

[@andrewstevens7205]

Can this be an add on to existing mst intake or do I have to buy the entire kit? It looks like the same intake pipe and filter. But the box and induction look amazing

[@Speedindustry]

We can see if there is an upgade option - Great idea

[@andrewstevens7205]

@@Speedindustry I’ll shoot Alex a message and talk to him about it. I deal with you guys for most all my mods. Alex is a great guy. You guys always have speedy shipping and great service. Best speed shop online I’ve ever dealt with. Always recommend you guys!

[@Speedindustry]

@@andrewstevens7205 Thanks for the kind words

[@lazyturtlexyz4498]

This is amazing.

[@JG-mg3if]

Damn that’s nice but I already have the Forge one..

[@Speedindustry]

Sell it - hahah

[@Overseerdv]

Ask any great tuner, back pressure is not something you want any of with a Turbo car. you want to evacuate any and all pressure past the turbo; larger the orifice the better,. The "oomph" lost is typical of adding an intake and highflow exhaust as it changes the power band and pick up through out the rev range. The GR ECU will learn to use these mods, but a tune is the real way to optimize in order to reduce the change in "oomph" you describe.

[@user-jn5bh5if3d]

CARB compliant?

[@thehomelessproject3784]

How does this compare to eventuri ??

[@Speedindustry]

See my comment below or watch one of our earlier vids - if you want that carbon look-- well then.. If you want an OEM finish look, Then MST is the clear choice -- Both solid products

[@user-tg5pw1wi7g]

When installing it everything worked fine, no code?

[@86Speed]

❤❤❤

[@Drag0ncl0ud]

When are these expected to start shipping?

[@toocamcivic]

As long as the pcv code stays away. I like this setup. Is it available with a complete turbo inlet?

[@breaks_n_stuff4049]

TBD

[@Speedindustry]

It looks promising

[@702probro9]

Damn I want to by the gr corolla…. But I need the Sienna first guys meh lol 😂

[@zedzillar349]

What are the hp gains..??

[@brennankipp3636]

Compared to Eventuri??

[@Speedindustry]

Different concept and look, they are both so different but also both similar bringing fresh air in from the front.

[@AcostK26]

Does it come with the pcv pipe?

[@teddygunzbarno2102]

So do u need a tune for this intake I know the mst says u don’t but I see videos all over KZbin with cel codes?

[@BigMeechEJ25]

I've been wondering the same thing. Can't think to help that it probably will, but hoping there is one we can drop in without a tune.

[@teddygunzbarno2102]

@@BigMeechEJ25 So if you're getting the m. Yes. TV one, there's a suction cup hose you can buy and the. MS V-2, there's a little coupler. You can buy, and that'll keep the cell code away

[@DannySarbs]

probably still needs a tune

[@user-tg5pw1wi7g]

Did changing to that intake give you a code?

[@Speedindustry]

NO

[@breaks_n_stuff4049]

I’ll stick with my SXTH

[@UserNameTakenDown]

So basically another CLOSED in a box filter. 900$ !!! 😳 The stock also in a box, just change the filter to performance type and you have the SAME effect and sound for less then 80$.

[@BigBlockOverland]

Eventuri is the only one I’ve seen with any beneficial differences

[@ryanw3907]

Stock box has a bottom flap that restricts airflow below 4k rpm. So this would be an upgrade over that. I wouldn't recommend running a less-restrictive "performance" filter that would just let in larger particulates to a high-strung turbo engine.

[@datacharge]

Dyno it

[@vincentluther8794]

All that and still no fix for the CEL? What a joke.

[@Speedindustry]

That is not a factual statement. They have worked hard on this and there was not and should be NO CEL with this intake

[@halorita]

Either way, the crankcase parameters are super strict from Toyotas factory tune, if you’re gonna mod the car, you’re only really gonna see a difference in everything thrown in through a tune like ecutek with graham from boostin performance. Otherwise, keep it stock