MTB Budget Upgrade: Crank Set Deore M4100| Unboxing, 1x conversion & Installation plus Ride Montage

[@enriquezcustom]

Most affordable shop links🛍️ M5100 2x Crank: shope.ee/7KYLHj1Lm8 M5100 1x Crank: shope.ee/Vi19Eps3g

[@Junior3z]

Loving the vibe =) Stay safe

[@alexBoblee]

Hello, I have the FC M4100 B2 cranks. Could I use 11 speeds and combine it with an M5100 derailleur on my rockhopper?

[@enriquezcustom]

Hello. Yes.. If you're planning to go 1x 11.. This is a very good match for M5100 up kit..

[@alexBoblee]

@@enriquezcustom Then I would only have to get: shifter, cassette, and derailleur? Thanks for the help.

[@DICEUKMemo]

nice vidz idol ride safe palagi bago mong ka rides dito

[@enriquezcustom]

Hello po. Salamat po! Ride safe din po kayo always! God bless!

[@Bangladeshiessence]

is it support 42-44 2 speed chainring?

[@enriquezcustom]

I'm not sure but 26-36 is the 2x rings that came with it..

[@rhanda50]

Is this compatible with 11 speed casette?

[@enriquezcustom]

Yes po. as long as 11speed chain specific po yung gamit nyo. wala po problem.

[@rhanda50]

@@enriquezcustom thank you

[@a.a.a.8857]

question, ndi po b pwde iretain ung 36t chainring so that we'll have a 1x crankset?

[@enriquezcustom]

Hello po. Pwede po iretain yung 36T provided na meron pong Chain guide. Hindi po kasi narrow-wide yung teeth ng stock rings kaya po prone po ito sa chain drop or malaki po yung possibility kumalas po yung chain lalo na pag trails or rough roads. Better parin po yung new chain ring since alloy material po and gagastos din po pag bumili pa ng chain guide. Stay safe po.

[@ZEPITAENTERTAINMENT]

Can you use this for 1x11 setup?

[@enriquezcustom]

Hello. Yes, as long as you change the chain rings with 1x specific type ofr narrow-wide teeth chain rings.

[@aaronrobino9434]

Ano po bcd ng chain ring na linagay nyo po?

[@enriquezcustom]

Hello po. yung ring specs po ay 96BCD Asymmetric..

[@pearlcortez6201]

1x12 setup is it ok? 11-50t

[@enriquezcustom]

Hello. yes it's great. you may refer to this set up with sram 12s cogs. kzbin.info/www/bejne/jqSyi2CwgZuWZtE

[@jahzielaligaga8742]

Anong pinagkaiba ng m5100 cranks sa m4100 sir?

[@enriquezcustom]

Hello po. I compared M4 and M5100 side by side and in terms of design and size, they were just the same. It's just the matter of stock chain rings that are made for 10speed specific vs 11speed specific. If you change both chain rings, then they are two identical crank sets.. Stay safe po!

[@ernestjamesrealuyo6208]

Sir pwede po ba palitan chainring neto to 50-36?

[@enriquezcustom]

Hello po.. pwede po as long as meron po kayong mahanap na compatible sizes kasi po rare po ang big rings sa 96BCD lalo na po at asymmetric po ito. Also consider nyo rin po if kakasya sa frame nyo, sa chain stay area. stay safe po.

[@karlblockstock2579]

Ilan po bb spacer ginamit nyo sa driveside?

[@enriquezcustom]

Hello po.. gamit ko po tatlong spacers on my totem frame.. Wala po akong spacer sa drive side since nag 12 speed po ako para ma center yung chain line.. Stay safe po..

[@karlblockstock2579]

@@enriquezcustom no back pedal issue or hindi naman tumama crank arm sa chainstay? Same po kasi tayo setup 2x convert to 1x hehe kaya lang 175mm haba nung crank arm nung akin. 68mm nga pala ang bb size ko sir

[@enriquezcustom]

If centered naman po yung chian line nyo like sa other mtb ko po na naka 10 speed, isang spacer po sa drive side and dalawa sa nondrive. hehe para balance po yung layo ng arms sa frame.

[@BurstShorts_TV]

Pwede ka pa bang mag palit ng mas mataas kaysa sa 36t idol?

[@enriquezcustom]

Hello po. Pwedeng pwede po, although rarely available po yung big rings na 96bcd asymmetric pero pwede po. Example "Stone brand s po merong 40teeth.. stay safe po.

[@kennethguevarra5192]

hello . meron po akong deore m5100 rd and shifter . tapos my 2by deore fd at shifter din po ako . nagkamali po kase nang bili . magcompatible po ba lahat pag bumili ako deore m4100 2x crank . 2by po kase gusto kong setup . salamat po

[@enriquezcustom]

Pwd po iyan. yung M4100 po na Crank set ay for 10/11 speed..

[@lanceloquias1575]

Sir ano po size ng Bb nyo po para sa deore m4100 same crank din po kasi pero wala pong bb na kasama kaya dko po alam ano pong size para sa bb

[@enriquezcustom]

Hello po. slr. normally BB52 po ang gamit sa mga shimano crank sets.

[@quoteopia33]

11 speed to sir?

[@enriquezcustom]

M4100 Crank po ay compatible for 10 and 11 Speed drive train. 💕

[@jerickjohndamian3750]

pwede po kaya ito sa 1by8 kung sakali

[@enriquezcustom]

pwd as long as mapalitan nyo po yung chainring..

[@normanvillodres385]

good pm sir, newbie po, naka 3x po aq m6000 10s, plan q po mag 1x na naka 11-46T or 11-50T kung kaya, pd m4100 na crank or mag m5120 na kasi 10s, and anu po advantage ng m5120 na crank vs m4100 ty

[@enriquezcustom]

Hello po.. Kaya po mag 1x ng M4100 na crank. Ngayon po ay naka 12speed 11-50T ako with Sram SX cassette and ito pong crank mismo yung gamit ko.

[@jimmydelima1407]

sir anong size nang end cup crank? m18?

[@enriquezcustom]

Hello po! size M20 po.. Stay safe always..

[@pokelast4333]

pwede po ba 38t chainring ang gamitin?

[@enriquezcustom]

Hello po.. Pwedeng pwede po 38teeth.. even 40teeth po although medyo madalang yung availability ng 40treth na 96bcd. as long as ma accommodate po ng Frame nyo na hindi sasayad, pwede po. stay safe po always.

[@silentmode]

Ano spacing mo sa rear hub? 135 mm QR?

[@enriquezcustom]

Hello po. Currently with 142 non-boost TA. Pero naka 135QR din po dati.

[@silentmode]

@@enriquezcustom no, I meant sa video na to.. naka 135 mm ka dito?

[@enriquezcustom]

Yes.

[@Rjcycling]

Magkani nyo po na bili yan boss?

[@enriquezcustom]

Hello po. nasa 4k-4.5k po ito depende sa shop. stay safe po.

[@christianalboroto7574]

Sir ask ko lang, sana mapansin. Pwede ba sya ipair sa Deore M5100 na 11 speed upkit? Eto kasi choice for crankset kasi mas mura kesa sa M5100 na crankset. Salamat.

[@enriquezcustom]

Hello po! 96bcd asymmetric po tong crank. Compatible po ito sa 10 and 11 speed. If papalitan nyo po yung chainring nya, magiging compatible din po yan sa 12 speed. And yes po, very afforday po itong unit compared sa competitors and ibang shimano crank sets. I'm running this crank po today with 12 speed m6100 group set and Deckas chainring 36teeth. Kaya po,pwd po sa sa M5100. Stay safe po!

[@christianalboroto7574]

@@enriquezcustom yun, salamat sa reply idol. God bless and ride safe.

[@enriquezcustom]

Anytime po! God bless po!

[@chickencorgi5827]

Ano sukat ng spindle?

[@enriquezcustom]

Hello po. Hindi ko po nasukat yung total spindle length pero yung BB po nagamit nito ay BB52 for MT500 or for XT..

[@lhonskie2148]

pwede po ba ito sa m6100 rd?

[@enriquezcustom]

Hello po. slr. Yes po.

[@jair_ag]

Sir, compatible with 2x9?

[@enriquezcustom]

Hello po. Pwd po ito sa 2x9.. Although medyo malapad yung chain ng 9 speed, di po ito mag kakaissue sa chain rings. stay safe po..

[@breinardbaluyut2357]

Ano po weight nya?

[@tegieibanez-wz3hr]

Mabigat sya sir compara sa m6000 na crankset

[@ChocoBorobo]

Pwede ba yan sa 9 speed?

[@enriquezcustom]

Hello po. Yes po pwedeng pwd sa 9 speed. Kapag po napalitan na ng chain ring na universal, pwd po ito from 8 speed to 12 speed.

[@ChocoBorobo]

@@enriquezcustom Sir. Yung stock na chainring lng saken e. Deore M5100 2x11 sya. Pwede kaya sa 9 speed lng yun?

[@enriquezcustom]

In that Case, wala naman pong problema. Pwedeng pwede parin po although medyo aangat po ng kunti yung chain sa chain ring. hindi po kayo magkaka issue as long as properly tuned po FD nyo. Stay safe po.

[@ajquimoyog]

Ilang bcd po ito sir?

[@enriquezcustom]

Hello po.. 96BCD asymmetric po ito..

[@ajquimoyog]

thanks idol

[@enriquezcustom]

Anytime po! God bless!

[@djrys0102]

Pwede ba to sa 1x9?

[@enriquezcustom]

Hello. pwd po. suggest ko po palitan ng universal chainring pang 1x

[@imeldacaguioa9150]

Ano po size Ng endcap Ng Deore m4100? Salamat sir

[@enriquezcustom]

Hello po.. M20 po.. Stay safe always..

[@jessiejaramillo9709]

.

[@jhonpaulcalara4493]

Kaya po ba SA 1x 11 speed set up Yang crank na m4100

[@enriquezcustom]

hello po. Pwd po sya for 10-12speed, depending po sa chain ring na gagamitin.

[@renzapolinario9565]

Anong size po ng crankbolt ginamit nyo

[@enriquezcustom]

Hello po. M20 po.