Plans - boosty.to/mtmw... mtmwood.com/ Free tutorial "The Basics of making end grain cutting boards" - eepurl.com/brMc_5
Пікірлер: 115
@blackemmons10 жыл бұрын
I never get tired of watching these videos……………….. just more envious. Those two shop helpers really make my day.
@mtmwood10 жыл бұрын
Thanks!
@roofermarc19 ай бұрын
I built two amp stands using soft maple like this. It's harder than it look's especially for me not having a large enough planer or a sanding machine wide enough. Yours are great. Thanks for posting. I'm building 6 end grain shelves for my audio rack now. Thanks again.
@davemccracken643610 жыл бұрын
I love the music, and those small helpers are very precious. Thanks again for sharing.
@mtmwood10 жыл бұрын
Thanks for watching!
@MRrwmac10 жыл бұрын
The grain showing on each small piece really looks great (well it does to me a woodworker anyway). Hate to see it chopped on (Haha). I always like seeing your twin boys in your videos and especially when they are helping their Dad! Them putting on the glue was probably enjoyable (like painting) for them. Thanks for sharing.
@mtmwood10 жыл бұрын
I like oak end grain. Especially medullary rays.
@pavitrashishah12819 жыл бұрын
Woww.... The best part was the two cuties applying adhesive. :)
@richardk1003 жыл бұрын
You have it down to a fine art.
@johnconklin903910 жыл бұрын
That's one BIG cutting board! Great work as usual.
@mtmwood10 жыл бұрын
Thanks
@xBeauGaming10 жыл бұрын
Excellent job! Super surprised that the pores in the oak didn't pop out as much. Guess that is why you used the wax to seal it some. How do you like the rotex 150? Does it make life a ton easier for finishing cutting boards?
@mtmwood10 жыл бұрын
European oak is less porous than American white and red oak. Rotex 150 is very good.
@willford847510 жыл бұрын
Great job! I would be interesting to weigh the board after the finish had been applied to how much it took on board.
@jamesburriss10864 жыл бұрын
That's a good idea this is something I'm going to try
@jamesburriss10864 жыл бұрын
Good thick board but oak splits easily on the end grain if this board is to be used for chopping shouldn't it have a deep horizontal spline around the perimeter?
@rickmccaskill78884 жыл бұрын
Some people say you shouldn’t use Oak, what is your thought on this? I have some 100+ year old oak, great tight grain, I want to use on a cutting board, what do you think about using it? Thank you always enjoy your designs.
@R_an_D3 жыл бұрын
To all the people in the U.S. and Canada that are asking if a cutting board can be make from oak... Do not use red oak, it is too porous. White oak has tight grain on the sides and end grain. Boards made from both edge grain and end grain are very durable.
@mtmwood3 жыл бұрын
We use European oak. It is less porous than American oaks. I think it is the best wood for end grain cutting boards. Even better than maple or walnut.
@TheChrisPineWorkshop10 жыл бұрын
Once again love watching your videos! Great Board! Chris
@mtmwood10 жыл бұрын
Thanks!
@jnb-criandodebaixodaarvore99645 жыл бұрын
belíssima tábua meu amigo ficou top parabéns
@nandoroy884 жыл бұрын
Did you steam the end grain after sanding and then take back the raised grain? I didn't see it in the video, wondered if it had been edited out?
@glencampbell46613 жыл бұрын
Beautiful boards, what is the wax mixture you heat up at the end?
@MrBucidart8 жыл бұрын
Now that's a chopping block, nice
@mtmwood8 жыл бұрын
+Joe Bucci Thanks! It was simple project.
@jbender10248 жыл бұрын
K thanks, love your work!
@policev8409 жыл бұрын
Excellent craftsmanship! I have seen several of the end grain videos now and enjoy them a lot. I understand the mineral oil portion, but what does the mineral oil and beeswax finish do?
@mtmwood9 жыл бұрын
It is just more durable natural finishing.
@hanslund26517 жыл бұрын
With what do You impregnate them? And for how long do You have in the oil?
@briarfox6375 жыл бұрын
I love the look of oak, but be careful planing end grain bc it's very risky running it through the machine. Better to belt sand it.
@mtmwood5 жыл бұрын
I do this everyday during ten years - kzbin.info/www/bejne/h3uVfYagabebd9U
@KurreStenback10 жыл бұрын
Superb :) What kind of oil are you using?
@mtmwood10 жыл бұрын
Mineral.
@franky9fingers8 жыл бұрын
hi. i eo love your work...outstanding craftsmanship. got a question: what are the measuremnts ofthe sawed pieces?
@mtmwood8 жыл бұрын
What do you mean?
@jbender10248 жыл бұрын
why are American oaks not good?? I have some rough cut white and red oak i was thinking of using to make a board.?
@mtmwood8 жыл бұрын
They are more porous than European oak.
@jbender10248 жыл бұрын
could i use white oak safely, just need to seal it more often??
@mtmwood8 жыл бұрын
johnny wishbone I've never worked with the white oak, but I think it can be used. Very good characteristics with the exception of shrinkage. So use only kiln dried lumber.
@ryanbates70376 жыл бұрын
Our oak is just fine.I've had a white oak end grain board for over a year now. Just requires increased conditioner in the beginning to get a good seal.
@TheGogobutt4 жыл бұрын
Nice vid. Why didn't you wear protective gloves?????
@Norwegianwoodworker9 жыл бұрын
Hello. Is Oak a good choice?? A problem with oak is that when it's bare (no finish of any kind), the tannic acid reacts with iron and causes dark stains. It will stain the wood, the food, your hands and it doesn't come off easily. I know you use mineral oil to finish your boards. But have you had any feedback on this cuttting board? Best regards. T.Robertsen
@mtmwood9 жыл бұрын
I think that European oak is the best choice for end grain cutting boards. Oil and beeswax make good protection. I sold several thousands oak boards, only positive feedback. My wife have all possible boards, but use mainly oak.:)
@Norwegianwoodworker9 жыл бұрын
mtmwood Ok. Thanks for the feedback. I have a lot !! of thick long oak boards that I cut down 4-5 years ago. A short trip in the kill'n and I will make some christmas presents. : ) Have a nice day.
@mtmwood9 жыл бұрын
Yes, the moisture content should no more than 6%.
@thehusband124 жыл бұрын
Great video of course! I have heard that you shouldn't use oak for end grain cutting boards because of the open grain structure. Have you had any issues with oak or customer complaints?
@mtmwood4 жыл бұрын
European oak is more dense and less porous that American oaks. I think it the best wood for end grain cutting boards.
@thehusband124 жыл бұрын
Thank you for the reply. Can I still use American red oak? Does it impact the look more so than the function?
@mtmwood4 жыл бұрын
@@thehusband12 Yes, of course. The pore size of any wood is incomparably larger than the size of the bacterium
@jamesburriss10864 жыл бұрын
The beeswax seals the grain leaving the board very resistant to liquids penetrating
@davidross76749 жыл бұрын
hi again....would you mind sharing with me where you buy your rubber feet for your boards? I am having trouble finding them in bulk....and also could you share the size of them.....thank you so much I love you videos....
@mtmwood9 жыл бұрын
David Ross We buy them in China. The size - mtmwood.com/en/?route=product/product&path=20_90&product_id=661
@ryanbates70376 жыл бұрын
Home Depot. $2.47 for a set of 4
@TheLvillefan5 жыл бұрын
Great video if watched without sound. The music selected will make you wanna cut your self. Avoid hearing it if possible.
@nackabags10 жыл бұрын
Like ure new music too!
@mtmwood10 жыл бұрын
KZbin added new music. :)
@whitewolf875810 жыл бұрын
Now that's a cutting board!! Woooo!!! I love it!! How much do you sell these boards for?! Good job!!
@mtmwood10 жыл бұрын
Thanks. It is about 150 USD.
@whitewolf875810 жыл бұрын
mtmwood do you by chance have a site on ebay to sell these?
@mtmwood10 жыл бұрын
whitewolf8758 No. This board was made by order. The customer may choose all dimensions and some options. I have simple board designer at my site - mtmwood.com/index.php?route=product/product&path=20_95&product_id=676
@nicholassmerk10 жыл бұрын
What do you melt the wax in? It looks kind of like a rice cooker.
@mtmwood10 жыл бұрын
Yes, it is fryer. :)
@BradsWorkbench5 жыл бұрын
I was under the impression you couldn’t use oak for a cutting board because it is an open pore wood? Any truth to that?
@mtmwood5 жыл бұрын
European oak is less porous than American oaks. It is the best wood for end grain cutting boards.
@BradsWorkbench5 жыл бұрын
mtmwood ahhhhh thanks. Very interesting 👍🏼
@eh_bailey4 жыл бұрын
What is the sliding tray on the table saw? I need one!
@mtmwood4 жыл бұрын
This is SC-30 table saw, Griggio, Italy
@Artemmka10 жыл бұрын
Всем доскам доска! Здорово!
@mtmwood10 жыл бұрын
Спасибо!
@ms0099rg10 жыл бұрын
what size is the first rip cut? 2" thanks great video!!!
@mtmwood10 жыл бұрын
No. 37 mm.
@vitamiinru9 жыл бұрын
Супер! а воск обычный ли какой то хитрый?
@mtmwood9 жыл бұрын
Нет, обычный пчелиный воск.
@paulhuse10 жыл бұрын
What wax do you use for the final coat?
@mtmwood10 жыл бұрын
Beeswax
@Rinar-Mindubaev7 жыл бұрын
Здравствуйте, подскажите, пожалуйста, клен (американский?) который у нас практически везде растет подойдет для доски? Я не сильно разбираюсь в дереве, но есть желание сделать доску для супруги. Или что у нас из дерева, подходящего для досок, более доступно?
@Rinar-Mindubaev7 жыл бұрын
Я из РТ, Альметьевск
@mtmwood7 жыл бұрын
Это - американский твердый клен. У нас такой не растет. Наш, конечно, подойдет. Он помягче и сильно темнеет после масла.
@Rinar-Mindubaev7 жыл бұрын
Спасибо
@PPMOCRG4 жыл бұрын
Oak isn’t generally recommended for cutting boards because of its large open grain. Doesn’t seem like a good idea because of bacteria.
@mtmwood4 жыл бұрын
Oak is the best wood for end grain cutting boards. As for bacteria - mtmwood.com/index.php?route=information/information&information_id=10
@grandmastergeorgez10 жыл бұрын
HI, once again a nice video. Had you ever used Olivewood ? Is it good for endgrain cutting boards?
@mtmwood10 жыл бұрын
No, it is a bad choice. Do not use edible oils for board treatment, such as sunflower, olive, etc., because over time they will become bitter and give this taste to foodstuff.
@grandmastergeorgez10 жыл бұрын
Tell me about it! i am an Olivewood turner and i always have bitter taste in my mouth at my shop... I have even grown to like it ! ((( As for oiling up my creations i use mineral oil and beeswax to seal it if i can. Take care mate!
@mtmwood10 жыл бұрын
grandmastergeorgez I like Olive wood, but it is crazy expensive in Russia.
@grandmastergeorgez10 жыл бұрын
Its crazy expensive everywhere... wet here is at 150 euro per cubic and kiln dry to 20% is 1500 euro.....
@mtmwood10 жыл бұрын
grandmastergeorgez Too expensive for cutting boards. I bye kiln dry to 8% oak for 500 euro per cubic meter.
@franksalterego10 жыл бұрын
What is the life expectancy of a saw-blade cutting in oak? Frank
@mtmwood10 жыл бұрын
Long enough. I don't know exactly.
@user-mi2zc6ik7y10 жыл бұрын
Красотища!
@34665910 жыл бұрын
Как всегда молодец! Пацаны уже подросли! Привет передавай им. Как звать то их?
@mtmwood10 жыл бұрын
Павел и Матвей.
@garyassarian171110 жыл бұрын
do you have the plans to your projects?
@mtmwood10 жыл бұрын
It is very simple project. I didn't make any plans.