Much Better Than Expected! - Streamdock 293S & Mbox N3 E (Review)

[@QuasarPete]

With the 3 knobs, are they continuous turn, as in can I do a endless scroll, or is there a hard stop left and right?

[@RandomTeq]

Free rolling, no stops.

[@LucvanVliet]

The Mirabox hsv 293 works great, one problem.. I don't know how to make a back up? I lost all my settings and could find a way to restore it. Thanks for any good tips!

[@RandomTeq]

The settings are stored on the PC, so in other words, if you attempt to use it on a different PC, you need to download the software on the new PC and add the required settings.

[@LucvanVliet]

@@RandomTeq Thanks for your quick answer, I hope it will get a back up option.

[@nim358]

Is it compatible to premiere pro and capcut?

[@RandomTeq]

Yes.

[@rafaelboni3823]

Hello, nice vid! i own one of these and I'm struglin with a function. Is there a way to press a button and it change collor indicating that that action is ON, and when I press ir again it comes back to the OFF collor?

[@RandomTeq]

Got you! You will find what you described using the "hotkey switch" under "toolbox", you can assign both icons/photos, 2 actions, one that says off, and the other on. Every time you press, it changes the action and photo. Best of luck

[@WickdSeek]

when I open the software the nb3e is not on the list. Only 1 device is on it and I think its the slim. Anyway to fix this?

[@RandomTeq]

Does the device light up?

[@WickdSeek]

@@RandomTeq thanks for responding :D after 2 hours of trying to figure it out. It just worked somehow :D

[@RandomTeq]

Glad it did! Best of luck to you.

[@SupaaManix]

Hi, I downloaded and install the software from the website in the manual/back of device and my N3 doesn't show up at the bottom left of the app. Do I need to install driver or else? Thanks for your help.

[@RandomTeq]

No drivers required, it should work immediately.

[@stufflike5844]

I know this might be a big strech but have you tried using this on Linux per chance?

[@RandomTeq]

No. I'm not sure if it will work with Linux. it's not mentioned in the manufacturer description.

[@miraboxwholesale]

Sorry, currently our software only supports Windows and macOS. Linux is not supported.

[@ecotts]

@@miraboxwholesale You need Linux support for sure man 100%

[@OK_Matt]

​@@miraboxwholesalecan you tell me if it's possible to use two same devices (like two 15key devices) at the same time?

[@RandomTeq]

Untested at this point.

[@googleyoutubechannel8554]

Each button isn't an individual LCD smart guy, at least not the streamdeck, it's a single low end LCD display, with little plastic window buttons that slightly magnify the screen over the top, that's why the buttons are kind of crap, they can't work like regular mechanical switches on a keyboard.

[@RandomTeq]

Thanks for pointing that out, but I never stated that its individual LCDs, I have seen plenty of repair works done stream decks and know that its a nig display for all the buttons.