The Ultimate Guide to Guides - Mud Hole Live

[@nicklim7905]

Great show, very educational. Please do a show about heavy saltwater rods with roller guides wrapping.

[@Epiphalactic]

Lots of great info! Thanks for taking the time guys!

[@craigcampbell2687]

Nicely done. New to building, very helpful.

[@jharri1]

Great job as always guys!

[@ralphjones7240]

Microwave are great, i agree lock in the first three supplied spacing. Then tweeking spacing for you blank

[@davidcrump2348]

I have a 7’6” med/hvy fast fast casting and a 7’6” med.light spinning rod I am building. Both are MHX rods. I got LZR guides how do I lay them out . And also what is the best setting for the reel seat for each. The spinning rod I am putting on a 400 series lew’s custom speed spin

[@joshgross8741]

Spinning rod guide sizing for 2500 shimano reel; 16H, 12H, 6M or 6L, 5.5 (x5) runner all the way to tip. However many of the final size, 5.5 or 5 all the way out the rod to the tip which can be the same 5.5 or a half size larger. New school guide sizing.

[@PsicologoRodrigoManrique]

GREAT SHOW, could you tell me what would be the basic kit equipment to start repairing rods and guides? I am from mexico.

[@ruthmechling8094]

You guys are awesome you help me out when I have a brain fart or second guess myself

[@DaNy_P86]

if the tip of the blank measures 1.8, should I get a 1.8 or slightly larger ring?

[@christophercarter3685]

on the concept guide set up do you get line slap to the rod and does it slow down line speed?

[@kevinwest4488]

i want to build an 10 foot surf rod that is built to an particular spinning reel.. guide spacing is my question.. do you provide instructional to space guides matched to an reel?

[@boognish.]

Did you watch the video?

[@lymphy12]

Would Airwave guides work on a 4ft ish casting UL e-glass rod?

[@austingary9943]

What blank is the blue rod? I think thats a blank ive been trying to find for years!

[@forrestdanson8383]

Are LZR guides back in stock

[@zachariaszackkapellakis2815]

Can you pls bulding one tai rubber rod and one rod whit 2or3 part

[@frankfrok1265]

Hi Austin, its OK for you to disagree and you may well be right. However, there is so much information on the net that if the video is not on message immediately more often than not rod builders will look elsewhere. You have great information and a great business but that does not mean you cannot improve. Continuous improvement will keep you in the game. Frank

[@sgtrock9491]

How do you claim your prize? Thanks

[@Epiphalactic]

Did you glue the tiptop on for the deflection?

[@frankfrok1265]

Too much chatter not enough detail. Therefore hard to watch!?

[@Epiphalactic]

I disagree. It's a live video. There was tons of info. I found it informative and the chatter can have a ton of good info if you listen to it.