Took a long time to do the muffler mod. Then again, was my first time doing such work. Will be doing more chainsaw work as needed.
Пікірлер: 43
@jeffreyMagnum46011 ай бұрын
Yes indeed dirt falling inside a two stroke will take years off it's life if not destroy it. Cleanliness is next to godliness when it comes to two stroke engines. Zeromark202
@sundial69192 жыл бұрын
Love your 590 even more now an always love seein you run it
@thefirewooddoctor2 жыл бұрын
I love it more now that it has a bit more power. Doesn't struggle as much in big oak. You'll see that in an upcoming video.
@zeromark2022 жыл бұрын
Those 2 mods are a must, exhaust mod bumps it up to 5hp+ Small Air compressor is a must though when working on saws.
@thefirewooddoctor2 жыл бұрын
No idea what it gained but is noticeable! Will talk more about it in a future video!
@j.chrisbeck7492 Жыл бұрын
You need an air compressor, so handy to have compressed air for pre-cleaning before disassembly.
@EliteTractorworks2 жыл бұрын
Heck yeah sounds good!
@thefirewooddoctor2 жыл бұрын
It sounds good, isn't obnoxiously loud, plus it gained power!
@larrykluckoutdoors82272 жыл бұрын
Nice muffler mod on the saw
@shartne9 ай бұрын
An old paint brush can be used to dust off the saw dust. And you can put the air filter in a warm water.
@thefirewooddoctor9 ай бұрын
Using an old paint brush is an excellent idea.
@justinp94512 жыл бұрын
Got a 590 last year for a pretty decent deal. On sale plus 10% military for a 24 inch bar. Before any gas touched it I popped the limiters and bored the muffler. I have no clue if it made a difference since I never ran it stock. But it tuned nicely and sings in the wood now. Next I may try a 620 carb and coil but haven’t decided yet. They really are great saws for the money.
@thefirewooddoctor2 жыл бұрын
Look up "Buxton Work Saws" on Facebook. He can do a port job on the 590 that outperforms the 620P carb and coil mod.
@justinp94512 жыл бұрын
Thank you sir. I’ll definitely check them out.
@jeremymyers56432 жыл бұрын
@@justinp9451 own both, wish I would of bought the 620p first, love my 590 tho, just think the 620 is worth the extra money.
@backyardfirewood98522 жыл бұрын
I think I can do the same on my 620p. Did you tune the carb before your test cut?
@thefirewooddoctor2 жыл бұрын
I did tune it a little bit. Sound didn't seem to change much or feel in regards to rpm.
@thefirewooddoctor2 жыл бұрын
It did gain a little bit of power. Cuts nicer now.
@vincentnail2881 Жыл бұрын
How is the saw running now? You made this video a year ago, I just watched.
@thefirewooddoctor Жыл бұрын
No idea. Traded it in on the Husqvarna T540xp that I bought. Up until then, it was running great.
@Broddi1692 жыл бұрын
You have the O-ring now lol
@backyardfirewood98522 жыл бұрын
I could do this same thing on my 620?
@Broddi1692 жыл бұрын
@@backyardfirewood9852 it's identical yes
@saephan348 ай бұрын
Did you tune it?
@thefirewooddoctor8 ай бұрын
Didn't have to re-tune it much. Must've already been running close to perfect.
@dentondunn43462 жыл бұрын
What sized O-ring goes on the air filter
@thefirewooddoctor2 жыл бұрын
Don't remember, a friend gave it to me. Asked him what size it is, waiting for a reply back. Or just get the o-ring assortment box from Harbor Freight for a few $ and have everything you need for many projects if he doesn't get back to me in time.
@thefirewooddoctor2 жыл бұрын
The o-ring size is 7/8 inch outside diamater and goes in the air filter where it matches up to the carb inlet.
@dentondunn43462 жыл бұрын
@@thefirewooddoctor Thanks alot, I appreciate it. I won't have to worry about anything getting in my Timberwolf now
@thefirewooddoctor2 жыл бұрын
@@dentondunn4346, also use a tiny bit of dielectric grease on it too.
@dentondunn43462 жыл бұрын
@@thefirewooddoctor What's that do for it
@bentwedgestanleybrand58182 жыл бұрын
Good morning from Piqua Ohio
@thefirewooddoctor2 жыл бұрын
Good morning from my frigid cold beer delivery in Waite Park, MN.
@npb38712 жыл бұрын
Do these mods void the warranty?
@thefirewooddoctor2 жыл бұрын
Probably does void the warranty. The local Echo dealer said they wouldn't honor the warranty of my saw since it was bought online via Amazon so I modded it. The saw actually runs a little cooler as the engine now breathes better.
@sakkitty2 жыл бұрын
Find my profile. Original account was deleted by FB
@DoyleShadduck5 ай бұрын
A Husky rancher will eat that saw for breakfast bro. It’s not about size, it’s about RPM’s , and my Huskies rev more than anything available today. Echo saws warble and wobble in the wood. Echo makes great equipment with a superior warranty of 5 years, but doesn’t hold a candle to its supposed lesser the Husqvarna Rancher series . A great homeowner saw. Just my two cents, share your thoughts
@thefirewooddoctor5 ай бұрын
The Echo CS-590 makes more power than either the Husqvarna Rancher 455 and 460. For the same money as the Rancher 460, the Echo 620p will smoke it. That saw is on par for power eith the Arigl 362 and Husqvarna 562xp.
@jayminer94164 ай бұрын
SxS, stock v stock, a 590 will cut faster than a 450 or a 455, and is slightly faster than a 460. RPM's mean absolutely ZERO if your saw doesnt have the torque to keep them in the power band regardless of brand loyalties.
@thefirewooddoctor4 ай бұрын
@jayminer9416 the Echo 590 has a nice torque curve. Pulls a 24in bar nicely for what it is.