Another Update on George's Mugen Civic Si. The new freshly powder coated valve cover is here and time to install. What do you think ?
Пікірлер: 80
@robertjordan90754 жыл бұрын
Funny and informative, what more could I ask for? Nothing. Thanks guys.😎😎😎
@vtecbanger31804 жыл бұрын
Love it. As a mugen owner I’m hooked
@LHTPerformance4 жыл бұрын
Vtec Banger Awesome. Thanks for watching
@Namesi4 жыл бұрын
Valve cover looks amazing and makes a massive difference!!
@shaneblacklord33134 жыл бұрын
Hi John, Hi George, the valve cover looks great in blue. Tiny changes make huge diference.
@LHTPerformance4 жыл бұрын
Shane Black Lord It’s does. Looks awesome.
@zerokool32114 жыл бұрын
just got my mount kit for my EP3. going in tomorrow. was already planning on getting them but seeing the results in your video made me just go ahead and get them.
@LHTPerformance4 жыл бұрын
Jason Absher Awesome! Remember to install them all loose with the engine evenly suspended before tightening them.
@LessTalkMoreDelicious4 жыл бұрын
Yay! ...I look fwd to your brake-bleed video 👏✨ (Since there’s tons of diff techniques - old pump n hold way, check bottle, gravity, vacuum hand pump, pressure/Motive, etc.)
@RandomDude3204 жыл бұрын
aluminum brightener from Napa and a brush cleans up the intake manifold like new and works well.
@LHTPerformance4 жыл бұрын
Yaohan Jimenez Thats a good tip. We’ll have to try that and report back.
@RandomDude3204 жыл бұрын
@@LHTPerformance I took my manifold off sprayed some Brighter on it and scrubbed it with a wire bush lightly , and power washed it off i did not let it sit too long about 30-45 seconds and came out like new ! , if u cant find any at Napa most truck stops carry it I believe.
@jpsr20det4 жыл бұрын
Waiting for the intake manifold test , thanks guys!
@LHTPerformance4 жыл бұрын
jpsr20det It’s coming. We have to fit our stuff in around customers cars. We’re a shop, KZbin just shares it.
@jpsr20det4 жыл бұрын
@@LHTPerformance l know guys ...Kind regards
@jayjanyh29324 жыл бұрын
I'm looking forward to seeing the plastic getting dyed. Did you ever show us how you dyed the Jersey fabric that had turned blue, on those Type R seats, which were in your Red Integra build?
@mejia2124 жыл бұрын
I’m driving down to Florida March 2nd. I believe the upper mount you guys removed fits my 9th gen if so I would love to purchase it and have it installed when I’m down there Just to say I had LHT worked on my car lol !
@10thFTW4 жыл бұрын
Black intake cover, like the Acura. Silver intake mani!
@WD44RACING4 жыл бұрын
knowing how much Honda parts cost George looks like he has re-mortgaged like forever lol
@LHTPerformance4 жыл бұрын
Wayne Drury Mr LHT has been helping a little 🤔
@jayjanyh29324 жыл бұрын
George is talking about the nuts that hold the coil down on an r18 at 08:16 He reused them on his k20 covers. 90207-RAA-A00 is the Japan version 6mm hex nut $1.16 ea 90207-RAA-A10 is the US/CAN version 6mm hex nut $1.35 ea
@mattshardlow4 жыл бұрын
Hilarious moment when your watching LHT and John says hey Siri ....... your video stops and screen goes black and Siri says “how can I help” 😝😝🤦🏼♂️🤦🏼♂️
@LHTPerformance4 жыл бұрын
matthew shardlow Lol. It does it all the time. Of say ‘Kseries ‘and it does it too
@mattshardlow4 жыл бұрын
LHTPerformance amazing, keep up the great work and it makes me keep hold of my EP3 over here in London I’ve had for 15 years ..........
@madmanwheelies61574 жыл бұрын
Damn you are a real honda doctors looking your videos you have everything very good quality work congrats!!
@tspectuning4 жыл бұрын
You’d think mugen would do something with the valve cover on these as well seeing as they’ve done b series valve covers hmmmm interesting 🤔 love the series brother!
@ChrisHondaProductions4 жыл бұрын
Your si is so beautiful!!!!
@markfrost87454 жыл бұрын
Badges? We don need no stinken badges!
@arockpcb13474 жыл бұрын
Nice George
@shaneedwards52562 жыл бұрын
Did you happen to check the valve clearances while you had the cover off? If so did you have to do any major adjustments? Also have you swapped out the oil pump to a TypeR/S pump?
@kyleklassen36604 жыл бұрын
I think you should supercharge it :) and make a detailed and instructional installation video
@ccbz78514 жыл бұрын
I have the same car.. and hood cowl is not put together right and ive tried and tried... can you guys do a quick vid of how you guys fixed yours? might be able to pick up something that im missing.. please and thank you. Awesome channel by the way!
@davidrobinson64954 жыл бұрын
Any thoughts of painting the oil cap black (matte)? The blue valve cover looks great.
@ronaldsanpedro19764 жыл бұрын
What specific honda k series engine did the blue valve cover came from? It has a different honda motor co. Embose vs georges original one that says honda. Im just curious.
@GPY10504 жыл бұрын
Usually, the ones that says Honda Motor Co., LTD are removed from Acura models. Not sure why they do that. My EP3 just said Honda, and my TSX, as well as every RSX I have seen has the longer name...
@georgefitzgerald58614 жыл бұрын
This was from the k24a2 that went in the ep3
@cats.cars.334 жыл бұрын
Probably could use a Kraftwerks Supercharger system. ;)
@LHTPerformance4 жыл бұрын
Matt Lanoue Everything could. They don’t grow on trees and they don’t give them to us.
@macanoon4 жыл бұрын
Looks good but I don’t like the coated letters , they should be silver
@georgefitzgerald58614 жыл бұрын
mag00n they can’t be seen on this car so I didn’t bother
@macanoon4 жыл бұрын
George Fitzgerald fair enough bro. Love the channel and vids / work btw
@WelshyAutomotive4 жыл бұрын
Powder coat the RBC, carbon rad cover, hybrid racing fuel rail, etc!
@michaelpirroni15274 жыл бұрын
Just a question... would you "EVER" recommend running a flywheel without a pilot bearing or bushing? asking because i purchased a "Genuine Honda Type R retro fit clutch for my 2018 SI" and paid for it to,,,,,out my @$$. the reason I purchased it was because it started as a Genuine Honda part and with that i was hoping to get a stock like feel with increased holding force. Anyhow, it didn't come with a pilot bearing or bushing and the seller recommends not using one. I would just pick one up from Honda however its not that easy. IDs are different from DMF to SMF as well as trans input-shaft OD from Type R to SI. I feel that Honda's engineer's put one there for a reason, there for i should be using something in there. What is your take?
@DavidHernandez-ht5kv4 жыл бұрын
🔥🔥🔥🔥🔥
@joaquin00234 жыл бұрын
When you said hey Siri mine activated 😂
@LHTPerformance4 жыл бұрын
Joaquin Benzema Lol. I does it to me all the time. ‘K-series’ activates daily as we say it so much.
@camlobesvtec4 жыл бұрын
I like seeing more intake manifold
@vigiux48524 жыл бұрын
Hey there John and Goerge, nicely done! You said a few words about redoing the pulley assembly so I wanted to ask: what is you experience on the pulley bearings? I have tried everything - OEM Honda, aftermarket, separate bearings from SKF and so on but they just die in like 3 months. And rattle like crazy. The same story goes to the PCV valve - OEM or non OEM they start rattling almost at the same time as the bearing dies. Please give some thoughts on this one. By the way, the car is Typer R euro (FN2) with K20Z4 in it.
@crxbb95064 жыл бұрын
Aerospace 303 to bring back the faded black plastic trim
@LHTPerformance4 жыл бұрын
crxb b When it gets bad nothing works to get it really black. It just ends up shiny grey. We’ve tried.
@andrewpacheco35414 жыл бұрын
So what are you guys thinking for major power mods , super charger/turbo/cams ,anything like that
@nossyhot4 жыл бұрын
has George been loosing weight lately? he looks god!
@ozman19754 жыл бұрын
How about some detailing? Engine bay could use a wash
@LHTPerformance4 жыл бұрын
Ozzie Perez Thats coming , time is often the limiting factor.
@FirstLast-bi8xi4 жыл бұрын
Can the ivtec cover go in the bin? Or is it ugly under there?
@LHTPerformance4 жыл бұрын
First Last I think George wants to loose it. I like them when there re finished.
@georgefitzgerald58614 жыл бұрын
It’s a little ugly under there right now but I’m thinking of a couple ways to change it
@tnyce6164 жыл бұрын
Buddy club pulleys
@hyden15324 жыл бұрын
Whats the part number for the nuts? !?
@jayjanyh29324 жыл бұрын
George is talking about the nuts that hold the coil down on an r18 at 08:16 90207-RAA-A00 is the Japan version 6mm hex nut $1.16 ea 90207-RAA-A10 is the US/CAN version 6mm hex nut $1.35 ea I went to any Honda online parts dealer and entered 2006 Civic 4 door EX automatic and searched for coil. the 4th item down were the nuts.
@jeanbonilla19014 жыл бұрын
Where did George get the black oil dip stick from? Password JDM is the only place that I have seen that has em.
@LHTPerformance4 жыл бұрын
Jean Bonilla As mentioned in the video. We used Dye to color the orange one black.
@jeanbonilla19014 жыл бұрын
@@LHTPerformance oh lol I guess I did not hear that part on the dip stick. I'm interested on how u dye it now?
@LHTPerformance4 жыл бұрын
Jean Bonilla We’ll talk about it and do a ‘how to ‘ in an upcoming video. I’d like to share it
@GPY10504 жыл бұрын
@@LHTPerformance >>> biting my nails waiting for that vid. As minor of a detail as it is to some, I cannot wait to have my dipstick dyed black.
@jeanbonilla19014 жыл бұрын
@@GPY1050 I feel the same way. I seen the JDM black dip sticks but I dont want to pay that price
@chrisbruton59374 жыл бұрын
🤬bloody lht tlc....🤗 Just kidding 🍻from down under. Wish I had somebody some one,some shop with your attention 2 detail. P.S loving the taking the piss😎
@LHTPerformance4 жыл бұрын
Chris Bruton Hey Mate, one day I’d like to visit your crazy country..... Between bugs that want to kill you and cars with over sized blowers for burns outs....I have a cousin in Tasmania, one day....
@highspeedenthusiast66284 жыл бұрын
Performance, tune, rice?
@LHTPerformance4 жыл бұрын
HighSpeedEnthusiast Finishing a valve cover to a personal preference Rice ? Really dude ?
@highspeedenthusiast66284 жыл бұрын
@@LHTPerformance if you look closely there is a ? ending the sentence... started with performance and tune.... I think you really know where I was going
@rockytharpjr4 жыл бұрын
K24 swap
@133levi4 жыл бұрын
This sucks. Started following this and getting ready to start nodding and was hit by a driver that ran think my SI is totaled. 😢
@samson30004 жыл бұрын
Wait . . . Did you say you were watching this video while you were driving and you started to fall asleep and a guy crashed into your car? Man, I'm so sorry. If it's totaled, I hope insurance pays off enough to replace it with an upgrade.
@LHTPerformance4 жыл бұрын
133levi Are you freaking kidding !!! I hope there’s a shiny side to this story. Keep us posted buddy
@imcnblu4 жыл бұрын
@@samson3000 I'm of the belief that he intended to say "modding." Autocorrect on Android tends to change modding to nodding.
@133levi4 жыл бұрын
Lol. Modding. Lol. Don’t drive and watch videos. Or fall asleep.