How To Make 50kw Free Energy Generator From 50kw Alternator And 5 hp 2850 Rpm Induction Motor

how to make 50kw free energy generator from 50kw alternator and 5 hp 2850 rpm induction motor 220v 32 inch flywheel 400v three phase alternator
#free_energy
#energy
#generator
#alternator
for more information visit our website
inverter110.co...
my other videos
How To Make 15kw Free Energy From 15kw Generator And 5.5kw Alternator And 120kg 32inch Flywheel 230v
• How To Make 15kw Free ...
how to make free energy generator with 5000 watts transformer 220 volt generator
• how to make free energ...
New Experiment Of Making Free Energy Generator 230V Self Running Generator - 2021
• New Experiment Of Maki...

[@apexibuzzichelli643]

Your set up to be more credible, you should install a volt / amp meter to show how much the gen / alternator is producing at initial start up and to show it is up to the specification of the gen/alternator which is 50KW. Then you plug the different appliances and show the difference in the volt/amp readings before and after the appliances are plugged in.

[@johnjriggsarchery2457]

You actually believe these things are honest?

[@Mks-hu5ue]

Sir plz Send me contect no

[@atulpidurkarpidurkar608]

Kitane kV dayonama par kitane kV bijali janerate hoti ye sabako pata chalana chahiye taki gharke aplaysence chala sake

[@వేములరంగారావు]

@@apexibuzzichelli643 ఈకరంటుపలికరంయకడతయారీదీనివాట్సయంతరేటుయంతతెలుపగలరు

[@xtahir1]

یہ اتنے مہنگے پروجیکٹ آپ اپنے لیے یا پھر صرف ویڈیو بنانے کے لیے تو نہیں بناتے کسی کسٹمر کے لیے بناتے ہوگے؟ ایک مجھے بھی بنا دیں۔

[@soonvalleyugali4913]

ایسی ویڈیو بنانے کا کیا فائیدہ جس میں آپ نے کوئی تفصیل نہیں بتائی کہ موٹر کتنے حرس پاور کی ہے اور جنڑیٹر کتنے کے وی کا ہے پلی اور ویٹ کتنے نمبر اور وزن کا ہے ساتھ بتا یا کرو تاکہ اگر کوئی بندہ تجربہ کرنا چاہتا ہو تو اُس کو آسا نی ہو

[@vito_63]

Як багато бажаючих безплатної енергії, а такого не буває , повертайтесь у школу пана Ньютона. Ми отримаємо скільки енергії ,скільки потратили мінус втрати на тертя та інше.

[@dejchartburanabunpot179]

Please try 80% load of 50kw alternator 24 hours with timelapse video.

[@أبوأحمد-ه4ب9ر]

👍🏻

[@aidankennedy8924]

I'd say alternator would go boom

[@josephtaumbaya6957]

Good evening dear multi electro, I am very amazed by your ingenuity and encourage you to go ahead. wanting to copy your experience, I found a 37.5 kva alternator and a 10 hp three-phase electric motor with 3000 revolutions per second, can you help me on the weight of the counterweight and the sizes of the pulleys to be used if necessary? Please.

[@kawitempo8085]

did you fix it bro?

[@JeanMarieNdayishimiye-p7e]

Moi aussi je suis en possession d un moteur de 4kw et un alternateur de 40kw pourriez-vous me faire une orientation? Merci

[@captiandarwin]

Why do they always show a guy lighting up a light bald. Why not show powering up the house. What a waste of time all that work just to light up a stupid bald. Do something with it. Why doesn't he have this thing powering his house.

[@peterclimpson8384]

Just history repeating itself all the early manufacturing machines had giant flywheels

[@razikmohammad4471]

क्या साच मे ऐसे फिरी एनर्जी बिजली बनाई जाती

[@electricvideonice4783]

Is am delivery koro

[@eaxnml]

How to lose time and money , YT profits only.

[@vilasingale1970]

Sir give price for 50 kW from 5hp mote & Whatsup number

[@mbinedidier4833]

hello, I am interested in your machine, can you please give us the price and the name of your country to place the order? your equipment has a warranty for how many years?

[@adolfo5357]

How can I get the parts to widen it as proof? I like your work. Congratulations and Thank you for contributing your knowledge.

[@marthaluzachogarcia5692]

Donde puedo conprar este generador

[@DudeLineStatus]

Sir we want to make 10kw how many hp motor to put How many kg of fleewheel should be applied

[@UniVerseLore]

اَلسَلامُ عَلَيْكُم وَرَحْمَةُ اَللهِ وَبَرَكاتُهُ‎ بھاٸی 15kv کی کیاقیمت ھوگی۔ ھم لگواناچاھتےھیں۔

[@ericdongmo4377]

Hello, please I ask for your help I have been working on the free energy project and I see that the generator is well launched, it produces 380 volts but when we cut the mains current and we switch so that the generator works alone on the contrary its current output drops and everything stops. I would like to know why it doesn't keep spinning like what we see you doing in the video.

[@gustavobertazzi8164]

Hola que tal el proyecto? Tengo intención de construir un equipo pero según me informaron hace falta un variador de frecuencia y un control "lazo cerrado" para un funcionamiento adecuado. Saludos!

[@hoseeinChehrazii]

سلام با من تماس بگیرید به شما خواهم گفت

[@zakiruddin9710]

بھائ جان یہ 50/کے وی کے ٹوٹل سیٹ کا قیمت کیا ہو گا ۔۔۔کیا آپ یہ تیار کرکے فروخت بھی کر سکتے ہیں ۔۔۔

[@rmendes2mendes915]

many people are making these and showing them on you tube but few if any give you any information on how to have success. I will try to explain how these work and what it takes for success. first know these devices must be tuned, its a balancing act between all components. your generator/alternator must be two or three times larger than the drive motor. the connecting belts must be relativity kept loose, the tighter you make the belts the more amps you will draw from the drive motor. find the happy medium. your first goal and I believe most important is to drive the flywheel up to a rpm close to that which the generator needs to run at in order to output the amps needed to power the drive motor and have excess left over to power other things. but you must accomplish this while drawing the least amount of amps possible from the drive motor. the lower the gear ratio between the drive motor pully and the first flywheel pully the less amps the drive motor will draw. always start with a small pully on the drive motor. then size your flywheel pully to achieve close to the rpms the generator needs to operate at. but there is another issue you must be aware of, the size of your flywheel matters too. why? because you want the drive motor to operate at its rated rpm where it runs the most efficient at. if the flywheel mass is too large the drive motor will draw more current to try and get the flywheel up to the rpm the drive motor wants to run at. in short the more massive the flywheel the more current the motor will draw. find the happy medium. and there is another problem, the drag the generator will put on the drive motor. this is where the flywheel comes in to assist. so you see really it's a fine tuning of all components. because there are many different generators and motors you will have to tune each system. you may have to trial and error with the components, and certainly gear ratios. if your generator is not outputting enough power to keep your drive motor going or giving you excess power then you have to increase the generators rpm, change gear ratios. if your flywheel mass has enough energy to keep up the increased gear ratio to the generator without causing the drive motor to exceed it's efficient running status then you may have it dialed in. if not you may have to increase or decrease the flywheel mass or adjust the gear ratio between the drive motor and the flywheel. like i said it's trial and error, you have to spin the generator fast enough to get the power needed for the drive motor plus excess for other things but at the same time the drive motor has to operate at an efficient load speed. it's all done by correct sizing and gearing. oh and adding capacitors helps too.

[@hoseeinChehrazii]

دوست عزیز شما نکات فنی وقابل ملاحظه عنوان کردید ایشان که این وسیله را مونتاژ کرده اند باید می‌گفتند موجود مبدا چند درصد از میزان برق تولیدی را صرف می‌کنند وآیا این ژنراتور دائم کار است یا خیر و شرایط فنی موتور مبدا با ژنراتور برقراتوضیح میداد تنها بصرف یک برق را تولید کند مهم نیست مهم چگونگی پایدار ولتاژ برق تولید شده زیر با مصروننده هاست

[@ВиталийЗыков-я6ш]

Учите физику, потом собирайте😂

[@grahamsmith5477]

Put a video showing the system running when the alternator is fully loaded , at maximum output amps , and have the system running for at least 24 hours non stop, and have test verified by an independent engineer.

[@myyounes2012]

👍👍👍👍👏👏👏👏

[@099Evgen]

If it works for 5 minutes, it will work for 5 years

[@alwashere7261]

put your power coming into your house at full load and full amps for 24hrs see what happens - why are you such a doubter- go away and keep paying electric companies.

[@nidhalderbali7951]

لل

[@theguy4084]

why do you want to load 100%...just use what you want to use..if it works 1 hour, its enough free energy

[@ВладимирЮрьевич-ф5ю]

Ребята! Это несмешно.зачем ВЫ запускали эл.двиг.от электричества.? Неубедили!!!

[@nicolasdilalla4685]

no es un generador, es un conversor de energía mecánica a energía eléctrica. Pero la energía inicial es abastecida por la red eléctrica (No Free Energy).

[@simonemenin1640]

E secondo te.. dopo l avvio quanto dura , ossia per quanto ruota?

[@KambaleSerge-e8r]

What the kg for flywheel?

[@wilsonboakye8057]

They need to explain in writing what they are doing and what equipment they are using.

[@riceball4u172]

It's so simple, what's need to be explained? He started the motor with ac power,, once the flywheel got up to speed spinning, he disconnect the motor and quick plug in motor to the inverter.. Because the flywheel is still spinning,, it turn a generator power to spin the motor (black item is an inverter and generator)

[@humbertovilla7901]

Y dicen que no se puede

[@suredrashukla988]

Phone number per baat karo

[@Chalermwor]

I like this chanel that simple and clear to understand. Thank you very much.

[@MULTIELECTRON]

So nice of you

[@technicalsadamafridi4926]

@@MULTIELECTRON pris kiya ha

[@ВячеславГаев-с4г]

Любой маховик вращающийся без какой либо кпд есть лишняя деталь !!!

[@bhaskarprdash316]

Dearsir, Please inform the list of Generators & capacity as well cost etc & term conditions may be spared Thankyou

[@babrudinkhan5071]

5

[@Yousafkhan-yu2xj]

Please send location to see the demonstration and tech information

[@faisalgafoor5084]

بھائی صاحب پاکستان میں ابھی تک لوڈ شیڈنگ ہے یہ ابھی تک مارکیٹ میں کیوں نہیں آیا کیونکہ یہ پوری طرح فیل ہے

[@Forestduck1]

Maybe you could add a rubber insulation layer around the fly wheel then cover it in magnets, then put an air core coil or bunch of air core coils under or around the fly wheel ( less magnetic drag/load than iron core coils ) you have lots of movement at the fly wheel that could be used to generate more power.

[@abedmarachli7345]

I don't get your idea , kindly can you more explain !

[@ThienNguyen-rl2ew]

Đây có phải một sáng kiến thực dụng không vậy .hay chỉ là làm để lai sim chứ có che dấu gì bên trong không vậy bạn

[@Haramzoraiz9615]

U can add opposite poles permanent magnets on sides or fly wheel... those will create extra pull

[@gustavobertazzi8164]

Hola a todos! Como estabiliza la tensión ❓😶 Saludos ❗🍀

[@sirgkachannel1986]

एक जनरेटर सेट मुझे चाहिए है। मोबाइल नंबर दें।

[@gnisallauka7940]

Hi can you tell us how much KW/H is the output, is the current stable when you connect a few devices at the same time? greeting

[@arbabbaryal]

basically, the way i see it. the whole game is in circular motion of flywheel, which need lil help from electrical motor to maintain its cycles, the process is vice versa fly wheel helps the motor with its weight and circular motion and motor helps flywheel in return. now adding a low rpm generator is the key to this design. you can also use gears with this to attain higher rpms with less energy consumed by motor but the question is can this be used for more than few hours. i doubt this. the rod for flywheel and bearings will heat up after a while. these aren’t air cooled items. they will constantly generate heat and friction; this also depends on quality of bearings and rod used. secondly this design is not ever lasting motor and generator will eventually heat up also. may be after 8 hours or so after that system have to be shut down to cool it off.

[@fantasyofsciencetechnology6059]

If we use some continuos water supply from the top of wheel

[@nassimkoubeissi5814]

this system can only put a load lower than the motor output power ( mechanical) the video shows a motor 5Hp means 5hp*0.82 pout mechanical = 4.1hp useful power thy flywheel works as a speed regulator nothing more so a 50kw alternator has a mechanical input 4.1 hp -0.3hp losses due to mechanical bearings and belts so the alternator actually receiving 3.8hp effective power the alternator output gives at best 0.8 pf so 3.8hp *0.8 = 3 hp useful electrical power going to load so conclusion pout/in 3hp/5hp = 0.6 so this machine works for few minutes and go to a stop depending on the flywheel inertia .thank you .

[@itchyvet]

Notice the air cooling ducts in the generator, they are there to facilitate adequate cooling of the genny. The flywheel needs lubrication cants see an issue there. The rod, cants see any issues there either. I've operated large generators similar to this one for many hours straight, with huge loads put on them albeit with forced air cooling being blown thru.

[@DungNguyen-on3yu]

Có thật ko a

[@antonioenriquez6552]

Se ve que es un aparato genial, gracias por compartir esta información. Saludos

[@hanifullah9134]

سر اس کو سٹارٹ کرنے کے لیے کتنی وولٹ بجلی درکار ہوگی اور بعد میں یہ کتنا وولٹ بجلی دے گا۔پلیز گایڈ ضرور کرنا❤

[@javedshahid55]

where are you from bro from which country i am also an engineer can you talk to me

[@esmelyn100]

Cómo se llama el disco o pesa circular que utilizan

[@imranranakhurshid9281]

Good job. How much cost total system...?

[@edexjuvenalhuamanimolina2557]

Yo kiero una para Perú Ayacucho

[@abdulkaliika-cm5lf]

Can I have such a generator to power my load of 12kw,coz my power source is 15kw solar power and it's in reliable, depends on sun

[@adolfo5357]

Como puedo octener las partes para ensanblarlo como prueva , me gusta su trabajo Felicidades y Gracias por aportar sus conocimientos .

[@hammadullah3788]

یار جنریٹر مجھے بھی چائیے۔۔۔پلیز اپنا نمبر سینڈ کردے

[@podcast-this26]

can you kindly add a starter motor - only the starter from car has electric to it , start your whole generator spinning with the starter motor .. the starter gets the entire fly wheel up to speed then turns off leaving the generator and motor at full speed so you dont need to unplug the motor from the electric plug's grid .. thanks hope to see your edited design ...

[@ZeeshansheikhSheikh-xz6mm]

Salam Walekum mere ko aap ka mobile number chahie contact ke liye

[@mustfapasha7071]

برائے مہربانی ہوگی شکریہ کیساتھ کتنا خرچہ آتا ہے؟

[@nikollausfandel4616]

Is this "toy" effective? How much energy does that installation produce / hour? How long does the installation last?

[@trillrifaxegrindor4411]

people,you can get free energy by venting your car exhaust into your house........seriously,wake up

[@emmanuel1970]

Olá! Teria como disponibilizar todos os dados do projeto?

[@salmbamatraf390]

Thank u .my question is ...how can u controle the frequency at 50c\sec...how can u controle the voltage at 220 volt.

[@salmbamatraf390]

Plse answer this question ...iam from yemen i want to know more about this.we have no power 00967711685102wahtsapp

[@thandavamurthyg5766]

You can use tachometer to measure speed and multimeter for power output. Here they are using welding machine . It may be 220v.

[@aymenabid1555]

@@salmbamatraf390 my brother, did you try do it or it is really work serious without accident?

[@tompipps3383]

TOM PIPPS FOAM- BATON ROUGE LOUISIANA USA HI HELLO &

[@dextermahinay8764]

sir what is the specs of the flywheel? its diameter and its weight? thank you

[@zyto9188]

This is not a free electrician, it is a 220 vol to 380 vol motor. Motor capacity 220 vol glue shuttle.

[@pieterrossouw8121]

What will the price be of that 50KW power set?.

[@pieterrossouw8121]

Complete

[@AneesBinZubair]

5 lac only

[@cliffordruguna6820]

You should at least install a device to measure and govern the frequency of this generator to maintain it at 50/60 Hertz. Frequency can vary when load is applied and running without load.

[@reynaldobatiduan5514]

it seems to be a perpetual motion energy can restored in a big flywheel

[@donalddalley7274]

Unity machines are not possible due to losses, so the question then becomes how long usable energy can be sustained.

[@BLAMO-k7k]

Since I dont see anyone explaining at least in english I will throw it out there. All of the actual energy to power this contraption came from the outside power source used in the beginning to spin up the flywheel. This thing is basically a kinetic battery. No power or free energy was created by the machine. If you measured the total output of power vs the amount of power you drained in the beginning to make it all spin you would see more being used in the beginning than what came out of it.

[@عليجعفر-و4ف]

Brother, how many amps does it generate?

[@4littlechicken]

can you point me to the modification's on the motor or generator, I have a couple of 90 hp AC motors and 1 large generator, ? any suggestion's thank you

[@ZEUSKING66]

brilliant idea. can you please provide me a diagram, length. detail or specification what is needed to start this project. I'll try to make one of these. can send you my email when you reply me. thank you

[@peterssali3199]

Pls send me a fon number which has whatsapp. We can discuss in details

[@osmandemir7272]

Hello. If this mechanism works efficiently and continuously, why is it not used instead of diesel and gasoline generators?

[@AneesBinZubair]

Many people dont the process of this machine 😊

[@faisalrahman9236]

@@AneesBinZubair and politics too.

[@ownthan3556]

Ok

[@muhammadisa6190]

Great, my question is, how long can this run, how many hours, how many days can the be running and generating power without been turned off?

[@MULTIELECTRON]

life time if not any fault thanks for comment

[@realfacepakistan1396]

@@MULTIELECTRON kia ap mujhy bna kar dy skty hien

[@jonasyulledesouzayulle3300]

Bom dia felicidade paz grand invent union pacific legal e fundamental ferramenta motorizado sustentável sem imã no balanço imagina se colocar o imã norte sul com o alternador pode ser de carro coplado com imã norte sul fonciona e não para fica 5mes sem parar parabéns a equipe chall até mais abraço atodos.

[@aloisioallves6770]

SERIA BOM, MAS FUNCIONA SÓ POR UNS CINCO MINUTOS, VAI DEPENDER DO TAMANHO DA RODA AUXILIAR.

[@bobsteneck8502]

Well far is your voltage meter if you ran that little wire feed or arc welder all month long you can get two $3,000 electric bill and most generators won't keep up with it

[@zbigniewteterycz1571]

Pozdrawiam z POLSKI . SUPER pomysł.

[@rajivmohan3940]

Such Illiterate articles should not be published in this country, since too much of illiteracy and foolish ideas are already prevailing in this country. The great learned person is suggested to himself become the richest person of the world by this !!!!!! ??

[@Birol731]

Thank you for the genius idea, I will build a similar device and will test it

[@kawitempo8085]

did you test it ?

[@arlindorodrigues2804]

i work with any king of motors and generators but never heard such engineer talk about whats called air resistance ,what is you talking about air resistance ? anyways i seen lots of videos i mean tunes of generators to supply power right? I'm asking this question to the people who do this kinda free energy . do you guys believe in safety?

[@toinhodosopao1407]

A ideia é top das galaxias perceba que nem as lâmpadas deram queda de energia pois máquina de solda puxa muita energia 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

[@mohammedjanealam7153]

Pls let us know how to prvide 50kw gen in chittagong.bd.thankyou

[@АлексАндр-з5щ9у]

Все дело в краске-правильные цвета надо подобрать!

[@shahkhalid6199]

Sir installed motor you told is 50kva but load is not more then 5kva what is this can you explain plz

[@thomaslindsey3470]

have you used the 50 kw generator to power a work shop or house ?

[@jonasyulledesouzayulle3300]

Bom dia felicidade paz grand invent union pacific e fundamental uma energia forte mais forte que energia solar não tem está força e muito fraca .

[@abbasalaidaroos7108]

I congratulate you for this idea and creativity.. how much did this creative work cost..

[@Iskandar_Igit]

$ 2,000.00 - $ 2,500.00 at most 3K$ - but the data is promising - which we do not have available. - data like - what is the run time of the machines - what is optimum speed of the motor that spins the flywheel - what is the rpm of the flywheel based on the pulley used to spin the alternator - what is the output of the generator

[@AzimjonSafarov-wy5hn]

@@Iskandar_Igit ,hello friend i need your answer i mean it really works i mean physics has the concept of nothing come from nothing i want to make this invention but it should work for atleast 5hours without stop please tell me honestly if it works

[@arifryo6823]

what is the big pink pulley use for?. i want to make one but still dont understand the pulley mechanism,

[@saisanjay3936]

Sir ,How much utput can we take from the alternator for usage.

[@prakashhegade9470]

From where we can buy this

[@davidpleiadiantruthcabrera9966]

@@prakashhegade9470 DONT BE LAZY AND MAKE IT YOURSELF

[@eaxnml]

@@davidpleiadiantruthcabrera9966 Dont be lazy 2 and tell uneducatd ppl from yt truth. (Ublock instaled no profits 4 u)

[@mkamran5525]

Appna Nober Send kar doo

[@CommentsKattappa]

Anyway he is using energy from his alternator, and no bill. It works for small scale applications

[@JF32304]

I'd like to see a sustained resistive load applied. Water heater or oven. Be very interesting to see that.

[@İlyasAkbulut-j4m]

Hello. It's a very nice job. How much do you want for this machine? If I order it, can you send it?

[@ubaidrahman6512]

Salam Bhai, plz guide me. Ma 7.5 kva ka generator banana chahta hon. Mana ya chezain buy ki hain:- 1. Alternator honda 7.5 kva with RPM 2800. 2. 2 HP motor with 3000 RPM 3. FLYWHEEL 2FT DIA AND WEIGHT 50 kg. Plz guide me: 1. Small poly sizes? 2. Alternator and Motor RPM sahee hain ya 1500RPM walay lon.?

[@soloperformer5598]

It's amazing how much energy a flywheel can store once it's been POWERED up as we see.

[@KambaleSerge-e8r]

Giv me the detail montage or piece to piece, flywheel kg, section pouley, longeur support machine and belts

[@narmot291]

Good idea! Thanks dear! Pls What is pully size of attached with the flywheel both sides and pully size of Induction Motor?

[@hasanakkaya5536]

Prizin altından kablo ile elektrik almadıkları mechul

[@kennethobinnannamani1120]

Good idea! Thanks dear! Pls what wieght(kg) of the 32inches flywheel ?

[@MULTIELECTRON]

120 kg

[@oladimejiolusunmade4549]

Obinna, I am interested in the project too.if you are in Lagos. Nigeria get in touch with me [e-mail]

[@kennethobinnannamani1120]

@@oladimejiolusunmade4549 Your mobile number pls ?

[@islamicotherinformation2904]

Sir apna number sand karan

[@ImrankhanlovePTI]

@@MULTIELECTRON kindly send your contact number... 03410710443

[@Jigs99249]

How much electricity watt generates this enventur

[@apsert]

It cost a LOT of doe to make one of those flywheels with the holes balanced. I have no doubt we are witnessing the new era so naturally many will doubt.

[@MULTIELECTRON]

thanks

[@qutubuddin1503]

পদ্ধতি জানার দরকার নেই। নগদ টাকা দিয়ে প্লান্ট কিনতে চাই। দাম কত হবল

[@reverendfry6088]

The tensioner pully on the 5hp adds drag, so it should be eliminated and the 5hp should be fully adjustable.

[@JF32304]

Umm yeah that's really not much of a load.

[@RahMr2010]

Is 5 hp necessary? To power a weekend workshop.. how much power will I need..a few tools a medium electrical welder..etc?

[@wolfgangboettcher3126]

Wissen ist nicht Macht,aber wissen Schaft Kraft

[@akashrathodakashrathod9054]

Price of total project

[@loganathanramureddiar3890]

You have used a 50 KW alternator and 5 hp motor both are 1 phase type , Why it cannot be 3 phase version.

[@عطرالمرجلهالشمري]

اين مهندسين العرب عن هاي الفكره

[@thandavamurthyg5766]

What will be the overall project cost.