Muncie 4 Speed Rebuild

Carry out being put in a 1931 Model A.
PATREON: / curmudgeontransmission
Supplier Links:
Superior: superiortransm...
Transtar: www.transtar1....
WIT: www.wittrans.com/
Sonnax: www.sonnax.com/
Teckpak/Fitzall: www.teckpak-fi...
Transgo: transgo.com/
Precision of New Hampton: gopnh.com/
Atec Transtool: www.toolsource...
ATSG: atsg.com/
ATRA: www.atra.com/
Fatsco: www.fatsco.net...
Jaggi"s: www.jaggiimpor...
Slauson's: www.slauson-tr...
Standard Transmission & Gear: standardtransm...
Wade's: www.wadetransm...
Bishop's: www.bishopengi...

[@GearBoxVideo]

Someone sent a link to me to look at this video. The countershaft was installed wrong at 45:16. It needs to be horizontal with the flat facing the bottom. As you are banging on the midplate you are driving the misaligned shaft out of the front of the case. At 1:04:28 as you wipe the grease off the countershaft you can clearly see the shaft is now sticking out of the front. This causes the transmission not to sit flush with the bellhousing. Often times this will lead to broken case ears as an installer will over tighten mounting bolts to try and get the transmission to sit flush.

[@charliedavis6143]

Good job, I enjoyed it! Thanks

[@CurmudgeonTransmission]

Thanks for watching.

[@gdpeck71]

Have you rebuilt a Muncie 3 speed SM330? I haven't found any videos of a 330 rebuild. Is it closer to a Saginaw 3 speed or 4 speed Muncie?

[@CurmudgeonTransmission]

If I have it has been so long ago my rememberer does not remember. I would guess it would be closer to the Muncie 4spd. But both units, Saginaw & Muncie, are similar to each other.

[@jesusfranciscomontielmirab6375]

Como se llaman lo rodillos o balas q le pones al piñote (eje de mando)espero su respuesta

[@CurmudgeonTransmission]

Not completely sure what the question is, think something got lost in the translation. But I think you are asking about the bearings. WIT or Transtar sells the kit. Links are in the description.

[@高飞高]

When can we produce a gearbox assembly video for ax4n

[@CurmudgeonTransmission]

This is the same except the valve body, accumulator springs and side pan may be different depending on the year. kzbin.info/www/bejne/oWSsd4CijqhngLs kzbin.info/www/bejne/mKrVhKyHp52grtU

[@skutahuniai4830]

Tom, with no front seal, what keeps the oil from leaking around the input shaft?

[@CurmudgeonTransmission]

The nut is designed to push the oil away from the bearing retainer and back into the unit.

[@jasonmelara7522]

Hey boss I was wondering where you bought the bushing drivers?

[@CurmudgeonTransmission]

Atec Transtool .They no longer make the master kit it bought. Got it about 40 years ago. But they do have 2 different kits. Go to Etool source or type in Atec and it will get you there.

[@renaissanceman8564]

M21 in the house,,

[@alexanderstefanxandraswedi5835]

❤🎉😊 great job

[@CurmudgeonTransmission]

Thanks

[@РусланНенахов36]

👍👍👍👍👍

[@CurmudgeonTransmission]

Thanks

[@skutahuniai4830]

Excellent video Tom. 6T75 Gen 2 soon??

[@CurmudgeonTransmission]

Thanks. Pretty soon. Starting the editing of the patreon version. Hope to have that done this week.

[@CurmudgeonTransmission]

Video is up.

[@skutahuniai4830]

​. Thank you.