Munsters autoschade Deurne

Auto- & Truckschade Munsters is een groot schadeherstelbedrijf en spuiterij ingericht om transportmiddelen, van klein tot extreem groot, op een kwalitatief hoogwaardige en efficiënte wijze te herstellen of te voorzien van de gewenste kleuren

[@jamescarney6894]

Now that was a professional crew with all the right equipment! Well done gentlemen!

[@bobordewald1367]

Send it to Pakistani Truck Repair. Those guy would make a new frame and install it for about $8.00

[@MrLou7482]

YEP

[@merengueardiente]

and next thing you know , you are death , cause? frame failed... ( the moral of the comment) "cheap always cost more"

[@kampfmeersau]

@FEC Multimedia These guys are from Holland.

[@MedusalObligation]

The cleanest lathe. Cause it never gets oil!

[@etusch]

Send it to Turkey and you will get back it with new engine, with new chassis on the bill almost same with Lory price ( in reality some of studds stolen and badly repaired)

[@user-wr1vt3xi2b]

Ахиренный ремон, лазером посветили, покрасили и собрали, наверно краска как обои только что построенный дом держит)

[@Paue123zet]

подшаманили чтобы скинуть как без ремонта

[@Ampety]

Даже усилителей не поставили 🤦‍♂️

[@TT-ik6dc]

Многое решает Профессиональный инструмент ну и обученные люди! Молодцы!

[@betonline9337]

Ты дурак чтоль?

[@nhgttdeerghvcfhnuyyrfvhhgg9461]

Hello, I am a KZbinr mania living in Korea.I happened to see your KZbinr.As a car-loving flesh cancer, I praise you for your repair.

[@Sanek.K89]

Не бита не крашена)))

[@user-yz5wx6ph5c]

Тяжёлый груз не возили,по без дорожье не ездили))

[@user-ex6qg3bu1e]

После просмотра как восстанавливаю машины в Пакистане то эта контора нифига не может делать

[@user-mt5tk9wk7o]

Ссылка где....? Морда русская, мы что зря в трубе регистрировались...

[@user-zl1gc4rr4x]

С языка прям снял.я вообще подумал что они бы не заморачивались так а сделали бы новую раму.

[@NkRemTeh]

@@user-mt5tk9wk7o kzbin.info/www/bejne/favNg3arZ8eJhac

[@user-tx1ee4go8i]

@@user-mt5tk9wk7o kzbin.info/www/bejne/nqi8eGuHadFqiqc

[@vas95ivn98]

На Фейсбуке тоже их смотрю и охуеваю)

[@user-ew7oh1lk6e]

Хоть бы усилили... Это теперь их постоянный клиент, пока новую раму не купит.

[@alexandralien3941]

Согласен. Надо было накладками усиливать.

[@denisi.1929]

Зато красиво))

[@user-yk9wv8hg2q]

небольшие вставки 6:49 справа внутри рамы

[@nokithecat]

Good work... The Robot Painter for the trailers sure is good.... Consistent paint application for best results. Dissembling body parts is the best way.... So many companies now days just mask off and spray leaving poor results With quality tools you get the job done right the first time... Thanks for sharing the video

[@user-cs6ls9fo9g]

В пакистан им надо на стажировку

[@0e32]

I miss an importent part of this job at 6:37...The cutting, welding and eventual heat treating process.

[@JavoCover]

That's their bussiness secret. 😅

[@Airman..]

Go to Pakistani truck

[@faizanjoyia]

@@Airman.. yea they will take everything apart build new chassis’s and then put it together

[@jussayinmipeece1069]

@@faizanjoyia lol those guys are freakin magicians

[@turbo1438]

I would have liked to seen a reinforcement plate bolted inside the frame extending to the fore and aft cross members. Needs something to make up for this weakened, bent and straightened frame section in my opinion.

[@luisg8946]

turbo 14; very true indeed

[@mark-1234]

Pretty impressive what can be done when you have all the right toys. Unfortunately they skipped a part I would like to have seen.

[@maarteneevers3648]

Machtig gereedschap om hem weer recht te krijgen

[@victorperez9082]

honor a quien honor merece y el que sabe .. sabe ... excelente trabajo ...

[@anarchieclub1280]

gibt es voll Version davon??? sonst sieht man nicht wie die es gemacht hatten...

[@troner-tx3709]

Woow crazy work's my friend!!👌

[@user-qh3iu8so6e]

🌸سبحان الله وبحمده سبحان الله العظيم🌸

[@GARO1984full]

After 15 days comeback again

[@rezakurniawan9348]

Business

[@poct3326]

yes say thank you

[@michamagnuski8958]

Hahaha serwis x😁d

[@petermoran2204]

Thx for cutting out the part where you strain out the frame completely..

[@turbo2ltr]

exactly!! lame.

[@sideshowbob5237]

High tensile steel welded and dressed. Mechanical properties considerably reduced by heat. No compensatory reinforcement. A posh botch. Check out Pakistani Truck channel for better engineered repairs with almost no workshop equipment.

[@Iwavvns110]

@@sideshowbob5237 Exactly!!!!!

[@andywt8460]

Stand well back, sometimes you have to twist a long frame 1m to yield so it returns to its correct shape

[@emmanuelmureithi897]

Trade secrets perhaps? All in all they edited the most critical part of the video, perhaps the reason why we all watched the video to the end!

[@Timodon1]

This was a good work from professional people! I sometime do this too in my workshop here in Stockholm but i cut out the profile and weld a new one as it must be done! Using 400 Hardox!

[@younessmontana1370]

Hello sir

[@Setrabusser]

@@younessmontana1370 der er skiftet vanger efter forskrifterne, se ordentlig efter så vil du se at hullerne er anderledes.på de nye.. mener at der er skiftet ca 1 meter i begge sider, men ja den bliver solgt til asien eller østeuropa.

[@roshanannauth3172]

I guess that the mercedes truck industry themselves wont b able to do such precision work to repair such damage chassis... awesome work.. thanks to the technicians and the video uploader

[@MultiArrie]

they are more interested in to sel you a new truck.

[@roshanannauth3172]

U r right bro

[@KEHT92]

Was für ein Aufwand, Respekt Jungs!!

[@chrisbanning413]

Straight to auctions to be sold before it bends again

[@tphone720]

Thanks for cutting out the part were you work harden the steel and it becomes brittle. That area needs at the minimum plating.

[@ronialdosantos7383]

Trabalho incrivel gostei e estao de parabens pelo serviço, espero que traduzao kkk e entendao bem

[@Borshev.A.N]

Ай да маладцы как зашпаклевали как новая стала. Самого главного и непаказали что да как там куча потянутых мест что они вырезали или осаживали. Ролик для тех кто не понимает

[@haizenberg8849]

да это вообще ни к чему хорошему не приведёт,от нагрузки сложит обратно так как метал запоминает кривизну.просто подшаманили для продажи за рубеж и всё.и какого хрена они почти все без перчаток?

[@user-hc6wx7hj4g]

Хуйня ничего не показали

[@maratr2663]

впарят какому нибудь лоху

[@MrGraf251]

это тебе не Россия ,если что случиться ?будут отвечать ,по этому если фирма существует то работают на совесть

[@Maikl_006]

Ролик для тех ,НЕ БИТА НЕ КРАШЕНА БЕЗ ПРОБЕГА ПО РФ😂👉👍

[@lelolek]

" It was nothing, frame just bended from humidity. We've just applied some heat and it is straight again" :)))))

[@lesreed7943]

Russian?

[@ph11p3540]

@@lesreed7943 Plastic

[@themechanic8885]

Good job .keep going 👏👏👏👏

[@orlandocardenascastro128]

Que buen trabajo. . *Desde Colombia un saludo*

[@alamzkureshi1752]

How days you take to complete this truck chassis

[@rachidboutoughmas7642]

Wawww se jeant thanke you very match vive la llmagne dutz aljerie 👍👍👍👍💪💪💪💪

[@gatti5002]

en hoe is er gerepareerd ?, zijn er snachts kaboutertjes gekomen en hebben de framerails gesmeed , gelast , gekleefd ?

[@andywt8460]

Good job! Have seen this and worse repaired many times, it’s a tried and tested repair, European truck chassis are not normally very high tensile, not like US style which can’t be welded or drilled. I worked for many years in a workshop where we repaired 100’s, some needed reinforcements where the damage was caused buy operating conditions but the majority did not. This looked like accident damage where the trailers been rolled bending the frame in half, it’s difficult to show all the repair which takes time, it will have been pushed, jacked and pulled beyond yield to settle back at original position, induction heating is used to relive stress, that 40t G-clamp is a mean piece of kit and will square anything back into shape. This truck will be back on the road for many years to come, it will not bend or crack which many have commented. The equipment is Josam of Sweden who specialize in accident/straitening repair, have a look at their website

[@miroslavdelic9558]

Svaka Cast koja majstorija Pozdrav iz Srbije👍👍👍

[@jeffreymorton1482]

i wanna see episodes of these types of rebuilds

[@rishen8469]

Потом продадут. Не крашеный, не битый. В магазин молочко возил...

[@user-lu2fm7nv5m]

да и хуй с ним

[@KazakovNik]

@@user-lu2fm7nv5m особенно пох*й будет когда он груженый перевернется и автобус с людьми размажет ?

[@stevehuffman7453]

The frame wasn't reinforced after straightening?

[@AnsariBaksh]

Amazing work 👍

[@yuhangzhang8474]

how the rail repaired?

[@chadmccabes611]

Thank you for not showing us the most important part of the video, wasted my time!

[@fuzzzeballs]

dickhead

[@ordenavide2986]

My face in final video: 😐😐😐

[@nantupaul3473]

Excellent experience -& Performance

[@dvbbassboostedmusic5177]

eerlijk waar hoegoed het ook gemaakt is ik rij er niet mee

[@johnnoonan5802]

Nice jig and accompaning tooling , she went up nice and straight again , how strong is it now after it was torn and damaged on both sides and in the same position on the chassis , how did it bend in the first place what force did it take to do this just woundering , i worked alot on MAN DAF Volvo and mercs with heavy haulage but never saw a chassis go like this

[@lelolek]

It just felt from the cliff, exactly the same way as Jimi Heselden's Segway, he let the dog walker pass....:))))

[@jamesedmond3351]

What's up with the air line hanging loose, off the air tank, at 7:35?

[@3-body-problem]

So interesting. Arent these frames heat-treated though? How is that achieved post-assembly?

[@miltonbravo5655]

Exelente técnicos y herramientas para endezar chazzis de camiones felicitaciones buen trabajo . ahora no sería mejor haber cambiado los laterales? Un abrazo desde Uruguay

[@James64830025]

Will it cost $10,000 or more ?

[@MaxMustermann-ub9ih]

A broken frame is a broken frame....

[@DarkMental16]

It is good to throw it away....

[@haleyaiden4295]

Pakistanis would have built a new frame from plate hammer and a drill in less time

[@snakecold6755]

Testen Auflieger?

[@user-mm7yi9qr6t]

Боюсь представить сколько это стоило бы в России))) это праздник для сервисников)))

[@ashfaqalam893]

Brilliant man I love you

[@martinfranciscomiranda9085]

Muy lindo trabajo. Al parecer se ve que reforzaron el área de quiebre con remaches. Seguro se dice es mucho más resistente que soldarlo

[@rezaireza1385]

Nice ! Super Work !

[@alexandresilva9676]

Isso que é uma oficina de qualidade!!!

[@666kty3]

You didnt weld in a c channel scab on the frame? You just straightened it and left it with fatigued metal?

[@stronglyon7448]

No sr. : REFORZAR SOLDANDO PLANCHUELAS PARA REFORZAR EL METAL VENCIDO POR el accidente o CLIENTE TACAÑO ?🤔

[@martindelgado9753]

Wow amazing job.....

[@project6287]

nice Facom Gereedschap !

[@T3SKATLIPOC4]

...so, what happened?

[@sanchezking6188]

Not a huge truck(ing) expert... is it actually legal to use a truck that has been (essentially) split in half anywhere near Europe? I mean regardless of it being fixed or not.

[@1000SSOARES]

Parabens, excelente trabalho!

[@dbcrewforever]

Do you really welded the damaged frame together again?

[@Skoda130]

Yes, why wouldn't they? A proper weld is stronger than the original metal.

[@igi5516]

@@Skoda130 weld mb, but surroundings of the weld not

[@zkunka0027]

Your country is fully equipped with technology equipment. and the workers' hands are also good

[@g.jeu.1080]

After repairing, did you do the loadtest, and stesstest ??

[@ferencgacsi773]

No because it would break again:))

[@azamatgagiev4189]

Это я понимаю профессиональный работа молодцы 💪💪💪👍👍👍👍👍👍👍👍👍👍👍

[@DumbCarGuy]

Thats now the biggest C clamp I have ever seen.

[@qlimaxbass5022]

Good job But I replace the frame ....... because one day........

[@ParminderSingh-kx6oq]

Well done 👍 Good job

[@davidrfowler6432]

that was just a band aid solution , the frame is no longer sound and should have been scrapped , welding it just weakened it even more , that is why after all of the cross members are welded in , the frame is re-heat treated for tensile strength .

[@umitkan7472]

Perfect, bravo

[@soundsystem5686]

Professional beautiful real work

[@Medionxtr]

White T-shirt and jeans...nice :-)

[@TYSuggested]

Nice job. Ready for export lol.

[@mustangsuper1973]

Chassis supposed to stand any wear and tear, moreover any kind of impact, but this chassis condition is horrible to , What was the impact on chassis

[@user-wm7mi5lx6l]

แจ๊วดีจังนะจ๊ะ ชอบๆๆดู

[@mustangsuper1973]

Why cant give a new chassis for the truck, how far will the old chassis be stronger,

[@titicarlino9389]

Pero no se pudo colocar una reforma para que no vuelva a pasar lo mismo ..????????

[@catalinmaris6887]

and after you fix that frame the truck will be sold to Estern Europe as a perfect Dutch truck ;)

[@MultiArrie]

It is exported, ACTROS 2546 LS VLA euro 5 2008 to middle east, afrika south america how knows.

[@Skval2254]

They will say...it was from an old woman...and then complain if that truck with east european register is again part of an accident........about bad technical conditions of those trucks

[@dedesen69]

@@MultiArrie or to Greece...

[@peterchege463]

Mostly Africa

[@user-nn7lf3of8e]

Сразу на продажу его не бит не крашен ездила девушка

[@josephakai7297]

Ага и то в воскресенье в церковь 👏😂

[@franciscobarajasochoa8615]

Please, what country is this place, thanks. Amazing, job

[@bartmunsters8774]

The netherlands

[@buttleo5356]

Why not replace the main bars frame not good work

[@geerardkokosnoot3914]

Butt Leo It must be cheap as possible, Plaster and paint on it. Job done... Export, no garanty.

[@victimovtalent6036]

Why was the truck manufacturer not build the frame a little more thicker

[@darabradley5173]

How does one even manage to break a truck?

[@user-gc5mo2so9v]

делают работу конечно грамотно и професионально,может быть он ещё и поработает,но это у же ни рама.память структуры метала на местах сгиба,потянутый метал это слабина

[@NGAGABRAG]

Strong?🤔

[@coronelcaytis6450]

Profesional Guys 👋🏻🇺🇸

[@neguinblack1072]

Impressionante o trabalho desses profissionais, muito bom, parabéns... bravo.🤝🏿👏

[@momosikihogoromo7886]

Awesome job👍👍👍

[@Harwinder1972]

good work .well done

[@golibjonmamatqulov2549]

Привет из Узбекистан.

[@janetmerner3731]

Did not show them repairing the frame. Sie haben nicht gezeigt, dass sie den Rahmen repariert haben.

[@PatricioGarcia1973]

It has to be TUV approved, they welded the cut pieces and straightened the rest, just like we do to the cars on a Car-o-liner. Straighten out the chassis thru pulling.

[@michazoledowski7559]

Że takie uszkodzenie dało się naprawić 👍👍👍👍💪

[@dhanrajraj3821]

excellent work but very hard

[@Offhead84]

Да, в 2020 мне было необходимо это посмотреть.

[@BriGandCat]

ну чтобы знать.. что! не бит, не крашен, без пробега по РФ!

[@ronen124]

they didn't show how the two main chassis rails were changed from 6:12 to 6:43

[@galinmarinov813]

Perfect work

[@mehmetkarabidan7777]

Mükemmel 👌 👏👏👏👏

[@user-vl3jj3zm8t]

Самое основное как всегда скрыто