Using lee load all 2 with once fired hulls

I give a quick run down of what each station on the lee loadall 2 does with some tips and tricks to help you reload old shotgun hulls.
Added: Since so many people are asking about buckshot, I made a video on how to load buckshot with the loadall 2. You have to manually drop the pellets, but otherwise it can be used. Here is that video
• How to load buckshot- ...

[@tammamshud]

Why cant proffesional instructors make as much sense as you do ?. Well done sir, you have made my day. I Wish you well.

[@ian5780]

This was probably the best explanation I've seen out of dozens of the Lee load all 12 guage videos. Thanks brother.

[@sneakypeaky7483]

"I can load a lot of things that make me happy" priceless

[@CRMN457]

Lol😂😂😂

[@andrewluberto]

This looks so easy…. I’m definitely going to start reloading my shotgun shells from now on !

[@sebastianhidalgo6001]

I dont even have a shotgun or anything and I watched all the video good job very entertaining haha

[@peacekeeper3227]

Lmao same, its really interesting

[@armaannadeem63]

Same lmao

[@Samuel-xn8jq]

Same

[@clayhammond8312]

Save up some money and get you liberals

[@zeus4649]

hahaha x5

[@joeagosta9060]

Have been considering this press for a while, have loaded metallic cartridges, New to shot-shell reloading.. Lots of Great useful information regarding this press... Thanks Great Job!!

[@tonysudano778]

These presses are the most affordable for 12 guage you can get them on Amazon for about 75 bucks. Might need a few accessories

[@josephagosta20228]

I bought this press about 6 months ago..works great.. like you said . Good starter press, simple..got lucky and was able to buy 500 Winchester 209 shot-shell primers.. claybuster wads and 7.5 lead shot from Midway USA...I'm in business. Proper Crimping took some practice .thanks again for all the help

[@Ronnie_flex]

So happy I decided to pick one of these up. Way faster than my single stage rifle press. Your explanation of how to use it was clear and concise and I appreciate you sharing your knowledge with us!

[@loushackelford728]

This is the most Clear Video tutorial on the Lee Load All I have seen. I have the lee load all also, and I use it a lot for Crimping Hand loads and Buckshot.

[@tedh7543]

This is by far one of the best videos on how to operate this press. The tips provided in this video will help you tremendously and successfully reloading on this press.

[@tangledline]

Probably one of the best explained videos out there.

[@RussKinsey]

Just an additional note: As you demonstrated,the 12 gauge Load-All has the 8 point crimp starter in the front and the 6point crimp starter in the back. However, the other gauges have it reversed - 6 point in front, 8 point in back. I labeled my 20 gauge Load-All so I can keep it straight. 😁

[@pareloader5989]

I Owen the LEE load all 2 also. I love the thing. I have loaded thousands of rounds with it. I do take it apart about every 1000 rounds and clean and lube up the functioning parts. I can load a box of 25 in about 15 minutes. I really enjoy reloading with it.

[@sluggou812beotch]

I Owen it also. It's a rockin little press for slugs.

[@pareloader5989]

@@sluggou812beotch I’ve never reloaded slugs, just shot for trap shooting. Lots of fun to use.

[@BushSlacker]

This is one of the best videos I've seen on KZbin in 14 years. Now I know how much I need this in my life. Thanks 👍

[@aquablaster86]

I've been thinking about getting into reloading and shotgun hulls seem to be the easiest to begin learning. I really appreciate the video and info!🇺🇲

[@tires2burn]

My load all is the alum based one and its old. I load nothing but Buck Shot and it works great for me. Your video should help anyone looking to reload make up their mind on what press to buy. Great demo.

[@techmetal2292]

Lee products work great, cheaper materials than other presses but they always work and last and most importantly they actually help you save money while reloading

[@MechInvent]

Dude you literally helped so much. The thing didn’t come with a manual lol.

[@erikwilson7622]

Have this press, a Mec 600, Mec Grabber, and a couple of Ponsness. For single stage loading, this unit is the way to go. I can't remember the last time I used my MEC 600, this is so much easier to use, faster as well. Great explanation.

[@gipsydangeramericasmonster9632]

I’ve learned how to make/refill used shotgun shells today. Not sure what to do with this info, but im glad i learned it.

[@LaplusVi2]

I don't even own a shotgun but this was entertaining

[@AlexHernandez-rs3sq]

I remember when I was a kid back in the 80s my neighbor was a hunter and I used to go to his garage and watch him do this all the time he had a lot of antlers in his garage

[@nazartrask8478]

Very informative. I’ve been recently looking into shotgun reloading and for the price this seems like something you can’t really beat, definitely gonna have to get one and try it

[@danielsmith5023]

Thanks mate 👍 best lee loading video I have seen

[@michaelshubr4084]

Very helpful, and I think I'm going to go ahead and pull the trigger on a shotshell setup!

[@mnsteve77]

I am so happy I found your videos, very helpful and very well done. I wish you all the best.

[@willrisinger8784]

You are a great teacher this is making me what to start doing it thank you for making the time to make the video great stuff !!👍👍👍

[@Toku154]

Thank you for keeping it simple, not a .30-2hr video about this and that

[@henrikschrot1221]

Best video ever! Well done. Thank you sir. Greetings from Germany.

[@davidjones1060]

Thank you for explaining the shell should be in the crimp starter! Awesome job!!

[@Jannnn_]

The most american bubble gum dispenser

[@Jannnn_]

@Brennan Langston why would anyone care instagram is shit

[@jakecvje5620]

This is a great video, well done.

[@clay1671]

Great video helped me make up my mind on a Lee load all

[@dudester01111]

Thanks for this. I'm used to the Mec reloaders but they cost about 600.00. I was wondering how good these worked and your video showed that. Good video. Thanks again.

[@murphyfirearmstraining3630]

They don't make as nice as a MEC, but if you aren't a high volume shooter and want some specialty loads this is the way to go. Glad I could help.

[@ryansanderson3867]

I reload .223 and .308, after watching this I might start reloading shotgun shells. Great video!

[@murphyfirearmstraining3630]

Shotgun is actually easier than rifle, in my opinion. If you are comfortable with those calibers, 12 ga is simple.

[@jimlarimer2104]

Great video, I use mine for black powder loads for my Belgium Damascus double sold to me as a wallhanger. Instead of using plastic wads i use fiber wads and cards and love shooting this ole girl.

[@murphyfirearmstraining3630]

Yup. Or you can use brass hulls. I have a video of that also.

[@678friedbed]

what do you mean by "cards"? needing start loading BP shotgun shells also

[@jimlarimer2104]

@@678friedbed look at website 'buffaloarms.com' search for 'circle fly .025 over shot shotgun wad bag of 500'....a card is just another name for a thin, hard, compressed paper wad .025 thousands inch thick.

[@Saeed55615]

excellent

[@JimNicholsMotorManiaGarage]

Love it !! Thanks for making this video

[@dELTA13579111315]

I'm glad I got one of these presses. I only got my first shotgun a couple years ago and I got the press around the same time, and most of the shells I have fired I made myself :D About a month ago I got 50 more pounds of lead shot so I can start loading again, now I'm running out of hulls that I have the components to load lol

[@tires2burn]

I have the old alum load all and it loads all my BS and slugs perfect. I got rid of my Ponsness because the Lee is so much simpler. You can't get into shot shell reloading any cheaper than this and get quality ammo. Great Video.

[@murphyfirearmstraining3630]

Wish they still made it out of aluminum. Thanks for the support.

[@inthemoviecorners]

Thank you for a great video!

[@paulbynum8246]

Thank you your video was informative and helped a lot.

[@avpinstarter]

nice precise video mate

[@nbnotch5671]

very good Video, Learned something

[@righteousone8454]

Excellent video! Thank you!

[@Gunners_Mate_Guns]

That was concise and well explained. You made an excellent deal on your machine. Only three or four years ago, I said that it barely even made sense to bother buying a shotshell reloading setup when boxes of 25 shells of 12 gauge cost about $4.50. Those days are behind us now, so I'm probably going to get a Load All II, but only after this ridiculous primer shortage ends.

[@murphyfirearmstraining3630]

I originally got it to load high brass hunting shells that ran nearly 10 dollars a box. Now I use it even for #8 dove loads.

[@Gunners_Mate_Guns]

@@murphyfirearmstraining3630 You already invested in the equipment and components, so a smart man will put all that to new uses. Also, there's something to be said about the confidence and satisfaction factors for going out in the field when you rolled your own ammo. I have taken all four of my deer with ammo that I personally assembled (three with my Marlin .45 Colt lever carbine and one with my Ruger .30-06), and I like knowing exactly what I'm using to bring down such a beautiful animal cleanly and humanely.

[@murphyfirearmstraining3630]

@@Gunners_Mate_Guns awesome. I've brought down several things with ammo I made, and I agree that there is a satisfaction that can't be beat.

[@khosomujeeb]

I wish i had this tool or i had this job. I love watching it.

[@rasputinsorphan1260]

Your tutorial was so good I subbed to your channel.

[@murphyfirearmstraining3630]

Thank you so much

[@bernardomontell873]

Thank you, great video

[@Explicitrd]

See ya guys in 8 years when KZbin recommends this to y’all

[@joshuabeanblossom8371]

Only been 2 weeks😂

[@alexstore4319]

First!

[@thechannelisnotforeveryone9437]

@@alexstore4319 shhhhh

[@jameswomack8743]

Great video very informative.

[@scottdale9695]

You can easily load 3/4 oz loads on the loadall. Unlike Lee dippers which are calibrated in cc's the shotshell bushings are calibrated in ci's so if you were using 6 shot you would need .217 ci bushing. Take a .198 powder bushing and cut the tab off and slide it into a 1 oz bushing it will stay without glue. Weigh 3/4 oz of shot and file or dremel out the .198 bushing inside the shot bushing until the 3/4 oz if shot fits flush into it. Voila you have a 3/4 oz bushing. Works great for me.

[@murphyfirearmstraining3630]

Appreciate the advice. My review is of the stock machine, but that is helpful for folks who want 3/4 oz loads. Thanks

[@johnnybarbar7435]

Just use a good scotch tape and add layers inside the bushing to get light throws.

[@Gunners_Mate_Guns]

That was a damn good idea. We reloaders love tinkering.

[@Navyuncle]

I live near the Winchester shotgun range. They sell once fired cheap. I went to another local range and they gave me once fired hulls that I was willing to pick up.

[@h3infusionhemp940]

Best shotshell reloading video on KZbin!

[@trevorvanderheide6293]

Yes! I’ve been looking for a video on this press and nobody actually went through the steps to show you how to do it

[@johnshandloading7907]

Very good tutorial. Thank you for sharing. New sub.

[@depressoexpresso6053]

Your not the only one with that issue regarding using the 8 point crimp on new hull. I did the same buying a 100 bulk pack of new and preprimed Fiocchi hulls and the 8 point would just sink in. The 6 point works best to but I also notice it crimps a little deep and not flush as well with these new hulls.

[@stclairstclair]

I joined a trapshooting club and bought a reloading machine before I bought my first shotgun,(the club laughed at me because of this). I have shot tens of thousands of rounds over the last 20 years and have never bought a box of shells!!! I even make my own #8 lead shot pellets, In 2019 I was making a box at $4.50 per box because of making the shot and I buy 5000 primers in a case, $4.50 when AA shells were 10 bucks, Making shells is fun, I also wasn't effected when ammo was hard to find.

[@craigthebrit1132]

Nice tutorial....good skills sir.....

[@mohdhisyamsobirin4640]

Very Good Explaination Sir! Nice Equipment You Got Over There! 👍👍👍😁😁😁

[@yukiko0016]

It is so satisfying! ♥️

[@corecharger]

Great video. Thank you

[@ryanwilson8629]

Great video!

[@vinzalarms5079]

Great job 👍

[@mr77617]

I'm going to start saving my old shells

[@candacechavis6798]

Me to I have 16 1951 shells buck shot

[@BeardedDragonMan1997]

@@candacechavis6798 prosecutor's fallacy

[@berniebelcher2243]

GOOD JOB !!!

[@tonyjackson5115]

$23 per 100.... Oh man, those were the days! Great video. I have yet to buy one but it's on the list. I have seen 3d printed bushings. So there may be a 3/4 ounce option out there somewhere.

[@jgibbles8028]

Just got a lee load all. Do lots of birds and small game hunting. Looking forward to putting this info to use. Thank you sir

[@michal.abramowicz]

❤ 6star crimp works nice for new and used. I tested new plastic from fiocchi and 8star crimp su*k. Have a nice day, greetings from Poland.

[@murphyfirearmstraining3630]

My experience has been the same as yours. Thanks for watching.

[@AnnaCentauri]

good job mate

[@iansilva7422]

Amazing!

[@wolfe5937]

Thanks for the info

[@mbahbendil]

really cool, greetings from Indonesia my brother

[@user-cn1zm3yt3c]

hi,i love india!!

[@CaptainsDen]

FYI. There is an auto feeder available for the primers. Works decent if you keep it clean. I spray the feed ramp with silicon it helps.

[@murphyfirearmstraining3630]

I load pretty low volume, but I will give it a look

[@357bullfrog9]

I never can get mine to crimp that good. You do a factory looking job on yours.

[@Mississippi72]

My didn't do real good with cheap hulls

[@frankcastellano3412]

Good video!!!

[@sluggou812beotch]

You said this press is limited by shot chart availability but with a scale you can make a ratio/proportion formula to chart any powder. This is a great beginner press that I still use after years for reloading slugs.

[@murphyfirearmstraining3630]

I agree with you, but it is limited if you only use the data LEE provides with it.

[@sluggou812beotch]

@@murphyfirearmstraining3630 ya ya there's a chart available online and if I was a little more savvy on my phone is send ya the link but it's a Lee chart that has conversions for about 10 common powders.

[@murphyfirearmstraining3630]

@sluggou812beotch I created one as well and have shared with anyone who wants it. Definitely a good machine if you have more data than what they give you.

[@plata_o_plomo]

looks neat

[@jakesheffey9256]

Ive never seen shotgun shell reloading i had heard about it but I didn’t think it was this awesome

[@amirbadiei1784]

Thanks a Million

[@app4902]

That’s a slick tool. Better than loading them with a block of wood and a punch

[@themasterofmisanthropy7761]

So that's how you reload shells cool!

[@oldmanpatriot1490]

Freaking awesome... I want one...

[@Nate1984Mac]

Thank you

[@AnimeFan_2013]

That's awesome

[@dimplesambyal4548]

Very nice

[@joeydubbs763]

FYI the _low spot_ between 2 points is called the valley, the _high spot_ is called the peak.....if you care.👍

[@denovonacaatinga6505]

Parabens bela maquina

[@3braincelled-spaceboss451]

Kinda looks fun

[@michaelreifenstuhl4945]

I like the video

[@vdog4799]

I have the mec 600 but I love watching videos. I love making my own skeet shells. There's just something about puting it together that adds a spice to busting clays 😊 4:38

[@murphyfirearmstraining3630]

Absolutely. Thanks for watching

[@vdog4799]

@murphyfirearmstraining3630 I missed out buying shot before the pandemic. Now I'm hoping to make it someday if I can make a shot dripper. I'm not that good with stuff though so I can only hope

[@murphyfirearmstraining3630]

@@vdog4799 never tried that, hope you can get it to work.

[@PeterAgostiniJdcap26]

Good beginner reloader .. I use to pick up hulls at the trap range free.. and inspect them.

[@mikegreenawalt4726]

Places that have turkey shoots also would give away if asked I bet

[@americanmilitiaman88]

I handload 77 grain match for my AR. 44mag and special and 308. Want to get this. Very satisfying

[@ehwhynot6727]

This video will get 1M+ view soon...

[@fishmaster1409]

Yes

[@albertollorca5249]

Been using Load Load All for over 30 years, 12 & 20 gauge, still going strong. Paid $15 for the 20 and $19 for the 12 as I bought it a few years after the 20. I wish Lee would make a Load All in 410! Had to buy a MEC for the 410 and cost more than 5 times what a Load All costs.

[@murphyfirearmstraining3630]

Amen to that. If LEE would make it in 410 they would sell thousands of them. Thanks for watching!

[@jaredodell6768]

I've found that the 8 point crimp on the load all 2 sometimes comes open now it could just be the hulls but I find it funny that it's always the 8 point I have yet to see the 6 point do this it might just be the hulls I just wanted to put it out if there's something I'm doing or if it's the 8 point crimp or what have you keep your eyes open and always use your situational awareness folks

[@murphyfirearmstraining3630]

I have the same issue with once fired and brand new hulls. I use the 6 point pretty much exclusively because of it.

[@benjaminhmunhau5437]

Nice 👍

[@bobsemp]

Great video, thanks! I've been reloading shotshells (new and reused) with this press for years. The only issue I have run into is with the Cheddite hulls (16 and 20, but not the 12's) is that the shells have a tendency to buckle a bit during the final crimp. The only way I have been able to overcome that issue is by bouncing the final crimp a little at a time lower and lower until I get to the full pull on the lever. You got and suggestions (or similar experiences) with the cheddites?

[@murphyfirearmstraining3630]

Only cheddites I've loaded have been in 12. Haven't run into this problem, so I can't offer you any ideas. Sorry. If cheddite 20 ga come on sale I will have to remember that.

[@bixby9797]

Got one of these for Christmas and the manual leaves something to be desired. Your video cleared it up. Thanks for this. Now, if someone can explain all the parts that it came with, the manual does not show how to put the primer together. It leaves out what the sizer ring is for entirely. Got lots of Lee reloading gear and I think they really fell down on the manual on this one. Machine is good, though.

[@murphyfirearmstraining3630]

I will be glad to make that video. I did make one on how to set it up for a new load. Hope you will take a look and that it helps you.

[@SilntObsvr]

Welcome to the new world. A $200 3D printer will make all the shot and powder bushings you could want. I've seen files for them on Thingiverse, and the 3D CAD required to design any size you could ask for is just a few calculator keypresses an a few hours learning the software away. Outside dimensions will be fixed to match the Lee originals -- you make the inside diameter to your needs. You can even put the measurement on the front tab, though that's a little more advanced CAD operation. Why, yes, I do have an Ender 3 sitting right behind me as I type...

[@WARXDEVILXALAN]

Easiest way to seat in the primer is to slide the hull onto the press tube that pushes and seats the primer.

[@noisy_trumpet2302]

Thats cool

[@user-nm8mo9xc7u]

Nice episode. We hope you will be translating a book so that we understand the explanation

[@himachaliacount7777]

Very gud vdo

[@joeydubbs763]

I like the stamped shot shell cards. Nice touch.

[@murphyfirearmstraining3630]

They were on sale at ballistic products Inc. BPI for short. So I bought them. Really cool with a roll crimp.

[@gerrymatheson4020]

What are you referring to? The little white discs off to the right? What are they for...how do you use them?