Murray Cold Start & ROMP

[@redlinemotorsportts]

Sounds really good, like a voice over. Murray rips pretty good, always nice to have something to drive when you are building something

[@trevt99]

Wow, that Murray sounds insane, the new mic setup works awesome.

[@Fearlessfront]

trevt99 Thanks, I'm liking it too

[@michaelcarson2544]

I have an old husky lawn tractor. I bought it about five years ago with a blown 16hp twin, I upgraded to a 25 hp Briggs. I currentlyu se it for plowing snow, but after watching your videos, I want to make a bogger out of it. I really like all of your videos, thumbs up all the way.

[@Fearlessfront]

michael carson Thanks! a 25hp would have some serious balls!

[@michaelcarson2544]

It does for sure, pushes the snow really well, so I am really looking forward to transforming it into a bogger. Your racing tractor really impressed me, you got a real talent fearless, wish I lived closer would love to check out your tractors in person

[@signalhillscooter]

I love the microphone! I'm an audio tech so sound means a lot. You were right the exhaust does sound awesome. Great video, it was fun to ride along and get covered in mud. It was like a virtual romp!

[@Fearlessfront]

Patrick Leonard haha! thats the effect I was going for! thanks!

[@shotgunsnmudmowers8167]

time to build some front fenders

[@Crawlerer79]

Great vid Fearless. So glad to see one up!

[@1941paco]

Oh Hell Yea!! Just sitting here, LMAO. Huge grin on my face, Ayuh, that's mud season for ya!! Way to go Fearless, just given 'er!! And Fearless don't sweat a little bit o' mud on the camera, that, my friend, just adds to the experience. ....LOL

[@bmxforever001]

Long awaited romp of the murry!!!!!

[@hopaktruck]

Sounds great bud! Glad to see ya getting the boys out to play. I like the new mic setup, but even that doesn't do the Murray justice. It sounds so good in person.

[@Fearlessfront]

hopaktruck yes it does, not sure why... probably because it thumps on your chest as it's running

[@prancstaman]

Welcome back Mr. Murray. Missed yah. Sorry Fearless, LOL. Alot of your watchers like your Diesel Sears, but I like Your Murray. Just sounds awsome when you wine it out, LOL.

[@Fearlessfront]

***** I agree, this thing is rabbid!

[@MaximumMPH]

Fantastic Video Fearless! The Mic Works A Treat! Keep Up The Good Work Many Thanks Charlie

[@gerryreed6845]

Good to see your out romping again .

[@jphill529]

Love it sounds great and love the main mud mowers page you should post more often!!

[@DaCoder]

Very impressive that the camera footage was that stable.

[@FAL0perator]

New mic and gopro are awesome. Sound quality is significantly better! As for the mud, you are a clever and ingenuitive dude, maybe a piece of plexiglass under the mount would cure it? Thanks for the video though fearless!!

[@slimjim119]

mic sounds great so yay can't wait for next romp and hope we get to see racing mower out for a top speed try out

[@Fearlessfront]

Jim Rowlings yea, that should be fun!

[@steven7554]

Sounds great I wish I could come romp one day

[@BorosTheGamer]

man that mower sounds so badass

[@DevanHoldaway]

You should make some fenders for the front wheels. It would probably keep the mud off you and camera pretty well.

[@Dillon1791]

Put the mic in the intake :O lol sounded amazing.

[@choppersrule1]

you need front mudguards mate i am hoping to build a mudding mower when i shift house at the end of this year. so i will be asking lots of questions cheers mark

[@ethanbrazee4488]

You can hear the exhaust better now! Is the Murray pure straight piped? If it is it must be freaking loud in person! My craftsman with the 12hp ohv b&s is extremely loud.

[@KIDZKARTBLDER]

Freaking AWSOME!!!! And sounds amazing !!!!

[@mudbog109]

U need to make something cool like a snow plow for the diesel sears, i love that thing and its got the torque and power !

[@hondacl0n3]

It's nothing like it early morning getting called off for a bit from work because of the rain & end up watching your creative videos! Haha. Have you ever considered using a steering knob for the Murray or Sears? It seems like your wrists gets soar with all the weight as you turn.

[@Hockey47Mitsch]

Mic worked great! Also I suggest you to invest in some mud flaps on your tractors

[@Hoops420]

I love the new mic setup... You should just maybe try to keep the mud off the gopro ha ha

[@MrMach1]

Cool!! Looks like fun!

[@liloscar6918]

I love your videos +fearless front they are awesome

[@brennenjones451]

Hay fearless you should put a vtwin motor on the murray bolts right on just you need to rasie the hood i did it very fast

[@NickMartin9915]

10th never been in single digits for a fearless bid before

[@benjaminhill4532]

Anyway you could inform me on how to get a mower to shift gears without stopping completely. Thanks. .

[@restore56]

I find it funny how you don't care about seizing up the engine you just have another one for it when you went and replaced the block and rod and piston and a handful of other things on that engine lol But the microphone makes the exhaust sound a lot better I like it

[@backwoodsboys9440]

Can you do a road speed test on the ole murry?? That would be amazing

[@wetheralmaplefarm]

That machine is in sane!!

[@Fearlessfront]

wetheralmaplefarm it gets pretty out of control sometimes! lolYour murray could be equally nuts with a few more "additions" haha

[@garylowe8601]

Finally. The snow has melted. Love your videos. Wish my lawn mower was that fast. I hate cutting grass. Do you have a new truck or is it a visitors?

[@Fearlessfront]

Gary Lowe thats my new truck

[@garylowe8601]

Fearlessfront good stuff. Don't know why but the video you posted of it did not come into my subs box. Cool truck. I look forward to more videos now the snow has gone

[@brettc6730]

Fearless what if you attached a piece of plexi glass or sheet steel below the go pro to block the mud?

[@WeldstarCreations]

Perhaps put some fenders or mad flaps on the front wheels and extend the fenders on the rear wheels. The evolved Murray and the Sears are my favorites of all your creations. True ATV's at a fraction of the cost. Perhaps a Ford 8N pan seat and spring would seriously smooth out your ride on the Murray. Great footage and sound. The Murray sounds BAD ASS

[@Fearlessfront]

WeldstarCreations Thanks! I need a seat with more side support for cornering. Kinda like what's on the racing mower. It would hold my ass in the seat much better!

[@extremeoutdoorist24]

Fearlessfront could you show how to lock a mtd transfer axle

[@samk7357]

Great to finally have some decent weather isn't it. What part of Maine you from? In central Maine we were still getting some snow flurries yesterday!!

[@Fearlessfront]

Steve Sam I'm in kennebec county, it was snowing here too

[@Odd_Redneck]

Got any of that garden edging left? Could use front fenderz too xD

[@niallstackplantmachineryin6451]

You should put a turbo on the sears or even the Murray.

[@lovebumperknows]

Sound quality ,nice,, I believe you could start a business, modding mowers for romping

[@calvinrandall6329]

Put some front fenders on it to keep the mud off

[@codydavis595]

sounds like a quad lol looks like it drives like one too

[@cameronlafreniere2355]

I'm trying to make a gocart/atv but I don't know what type of engine to use

[@justinhagenson6901]

We need to go for a romp

[@abardin8163]

Hey I need some advice I have a mTD mower that I pulley swapped the back pulley to a 3 1/2 and I'm wondering what size pulley I should use on the front please help

[@maddux8975]

Fearless, I've ran into a problem, I'm trying the get my engine pulley off( stock, with the deck drive on it) and I'm trying to get it off but I can not get the bolt because when I try , it turns all the way to the left and then stops and I'm scared I'm gonna break something inside. Something with compression I guess. How would I get it off?

[@aydenguest1850]

What size pulleys do you have and what web site did you get the vampires from

[@Fearlessmudder72]

I got a problem with mine it won't stay runnin after I get it started. Plus it won't start itself I've gotten a new battery and it still won't start it self I have to jump it by my truck. What could be the problem?

[@magillsp]

How fast does the Murray go and what size pully is in the rear

[@carlosg1165]

is that your lot ? how big is it thats nice to have a place by your house to play

[@JoshKilen]

have two one the hood, one facing the way you are going and one facing you

[@GeorgeGardinier]

little fenders over the front tires

[@bobbyfillyaw9681]

how did u get your lawn mower to go that fast

[@austynickes493]

How do you protect your battery and motor from water?

[@kealinvinson2915]

when you shift do you use your clutch or just let out your gas

[@fearlessbmx1239]

That's sweet!

[@benmeyer2916]

Listen to that batt charger, don’t need a stupid alarm to tell you it’s charging, just listen to the hum

[@jasontarr819]

what's that in the corner under the tarp in the garage

[@Odd_Redneck]

Gaaahhh...i wana see the sears! Oh well. Ok uh...question...i have a project for my Electrical Engineering class and i was wondering...what kind of electric motor i need to get for a hybrid go kart. Its going to run a 12v system and another system volts unknown. Thing is i want to use a diesel genny on it like the 1 on the sears. Have the alt (if it has 1) run the 12v (lights) and strap a gen to the crank of the engine. To control and start i was going to do a overhead mount in the cage off to the right with a lever for the throttle like on the sears's idle/cruse. One more thing can that diesel run 20b bio?

[@Odd_Redneck]

And its going to be a trike if i can make it

[@Fearlessfront]

sysouvanh not sure, I'm not an electrical engineer, I took a couple years of 12v electronics... never covered anything like that though

[@shogunMR]

this is awesome

[@hondagarage9331]

Hey I was over working on my in laws mower and when you get it up and running it runs for a few minutes and then soon as you go to give it some gas it just shut off it floods itself out I took the carburetor apart and clean it up and everything looks ok and it so what do you think could be causing it

[@Fearlessfront]

***** check your air filter and spark plug. And use fresh gas as well.Once I had an issue with a plugging carb, had to do this: kzbin.info/www/bejne/g2SVfISjn8Z3b80

[@jordanbaker9402]

hello there what pullys are you running on the murray ?

[@MrZander138]

So I have a Murray very similar to yours but it came with a twin 20hp and that motor wasn't getting spark so I took the 25hp off my hydrostatic and now I shoot 6 inch blue flames at all times. What would cause that?

[@CharredSteak]

+MrZander138 Timing and/or fuel mixture causes after fire. I'd check your ignition coils and the jetting on the carb

[@MTD12HPTURBO]

Is that thing painted flat black?

[@Fearlessfront]

***** gloss black. the paint is pretty dull though

[@MTD12HPTURBO]

Alright thanks

[@The_JEB]

if you arent covered in mud while mudding, you are doing it wrong

[@noahconner5329]

Sounds good

[@markward553]

More videos please this is go stuff

[@evanwilliams7335]

Hi I have the exact same Murray as you what do you think about me making my four-wheel-drive

[@Fearlessfront]

Evan Williams you'll need a set of matching axles, one of which will have to have 4 wheel steer spindles on it. wetheralmaplefarm has a pretty badass 4wd john deere

[@jayv7404]

Hey Fearless! I have a question... I have a little 6.5hp mini bike. I am thinking about putting a straight pipe on it for better sound and power. I was wondering, does/can a straight pipe harm a motor? Maybe affect the piston when cooling? I figured I'd ask, a reply is greatly appreciated!

[@Ktm65xc101]

No it will not hurt the piston as long as its not to lean causing it to over heat

[@jayv7404]

What?

[@Ktm65xc101]

It the air fuel ratio a lean condition ocurs when the there is to much air and not enough fuel wich will cause your motor to over heat and seize up the straight pipe will help a little with power but only if you can tune it properly

[@jayv7404]

well I know what lean is, but how would I know? ive had it for years and its run great...

[@desertghost5273]

What do you like better your sears or the murray

[@Fearlessfront]

Carson McDaniel not sure, they both have there advantages & disadvantages. Depends on the type of riding I'm doing

[@tototang2061]

Why you dont try keep your go cart cleen？

[@redzz02]

That's fucking sex to my ears what does one need to make my exhaust sound like that and what mic! I need it badly for my gopro! Awesome video

[@Fearlessfront]

***** the mic is a "MOVO" microphone and gopro adapter. It wasn't that expensive. I bought a cheap waterproof case and drilled a hole through the side so it can plug in.

[@ghostbike03]

how much $ did you put in that mower

[@obs_willard_175]

Where did u get the teather at

[@Anthonyjc2000]

Do a cold start on the racing mower go kart

[@unownthief4163]

How did you make the nutty that fast

[@Fearlessfront]

xXdeadmockeyXx 2126 I pulley swapped it, it has a 4" pulley on the motor, and a 5" on the transaxle

[@mudbrotherz2824]

i have a older yard pro Lt 14 its 14 hp would it be any good to do anything to it or no?

[@OfficialRingWurmRacing]

Yes all mowers are good for this stuff as long as it's free or not your main one

[@cameronlafreniere2355]

Hey love your videos where do u live

[@joshrowe8507]

Do the sears next!!

[@joshrowe8507]

Josh Rowe for the mini romp

[@Odd_Redneck]

6:30 nope, chuck testa. Oh goodness what have i done? Lol jk

[@shawnreed6853]

how fast do these go?

[@mudder2323]

FearlessFront (Todd Christopher) +fearlessfront hey would u ever sell that thing and if u did for how much?? (Murray)

[@johnmckenna2429]

U should turn the race mower into a dirt race mower

[@oscarcano9654]

what size pulleys

[@stroudcook9647]

Could you make a Zamboni out of a lawnmower

[@TheLadsOutdoors]

i think the set up works good. but ya got to get your camera off the weed lol

[@tscustoms721]

Nice it's not a race track it's a mud track

[@BorosTheGamer]

hey i got a question for you where do you get your torque converters from

[@Fearlessfront]

Travis Brown Bmikarts.com

[@BorosTheGamer]

thank you :)

[@tmanmudder9517]

Hey +fearlessfront did you make stopper for steering?

[@brettc6730]

Yeah he has a video on it

[@tmanmudder9517]

Which one?

[@brettc6730]

Tman Mudder for both the Murray and the Sears

[@tmanmudder9517]

I mean what video

[@soloman30]

try mounting the gopro to the hood...

[@powwowwells8836]

like to get my murry that fast

[@Anthonyjc2000]

Take the racing mower on the mower track

[@TheMowerMan82]

If I could give this 3 thumbs up I would !

[@Fearlessfront]

TheMowerMan82 Lol! thanks!

[@braydenbond4660]

how fast does this go

[@Fearlessfront]

Brayden Bond about 20mph

[@GaryntaraBurbank]

Fearless Front Todd fuck a quad I want that Murray mud mower that fucker is bad ass years ago growing up in Tennessee my dad made a bunch of mud mowers I had a Murray mud mower and my dad built a bunch of mini rail buggy's out of mowers

[@kiethfolvik2054]

Can I have one of your lawn mowers

[@tylerdavidson4645]

can i have one of your old mowers you don't use

[@OptimisticPessimist]

You can usually find them for under 300 on Craigslist. I got mine for 100, but it required a $20 part and about 30 minutes of work to get going.

[@zacharymoen8788]

tyler Davidson I got 2 of mine from a dump