Sears Cold Start & Romp

Doing some mud crawling, nothing too crazy!
Murray cold start & romp:
• Murray Cold Start & ROMP
Get notified of new videos immediately!
Like Fearlessfront on Facebook!
/ fearlessfront

[@roski9777]

The best off road mower ever.....!!!! Great FF

[@Possumliving]

Man, that tractor looks, sounds and IS tough!

[@legomn54321]

The new audio-vlog mic system works really well. I can hear your voice and the roar of the tractor simultaneously.

[@Fearlessfront]

***** Yea, I'm surprised the audio is able to balance that well, I would think it would be overdriven.

[@samappler9266]

FearlessFront (Todd Christopher) what size rear tires are on the sears?

[@jacobburgos9830]

For a long time I wanted a Sears suburban ever since I got into tractors a few years ago. When I get my license in a year I'll hopefully get one.

[@Eljan99]

I prefer this "first person view" and loved the calm/mudding off-roading you did! Diesel poweeer!

[@lucakugler1096]

I think that is your best Mower. I love it...

[@kirbyvanduzer6565]

The new mic worked well I was able to hear you perfectly you got some cool mud mowers I wish I was a good mechanic im having bad luck with every mud mower I get I keep getting lemons if I was a good mechanic it wouldn't be a problem

[@carrichard]

Fantastic piece of equipment--Wow I thought you were going over!! Good Job !!

[@popel987765433]

The new setup is realy nice! Thank you.

[@xxdigitaldemonx8858]

Let fearless hit 100 thousand subs man

[@loganfields5512]

Fearlessfront you could rotate the stack forward so its aiming towards the front of the tractor thats what i did if the holes line up or you can re drill them

[@schark30]

keep doing hat your doing man i love the builds and love watching them in acton as well

[@jaronhillen4343]

H mm

[@Dibbs18]

Audio sounds great that was frickin awesome!

[@JJT113]

I love your sears. I'm getting one with a blown motor soon. I am thinking of doing the same swap. Yours is killer.

[@Dastardly84]

Audio was great. Love the sound of that diesel.

[@Fearlessfront]

***** Thanks, it's a tank!

[@bjt3150]

Audio has been a lot better I would lose the stack if it was mine

[@joecarroll8735]

theoffroader I wouldn't because then extend the exhaust and put the stack under the lighter side of the lawnmower like a side door exhaust on a hotrod

[@goofyschannel4799]

Love the video I'm getting a mud mower sometime this week it's a 1998 Murray 14.5 hp I can't wait to rip it

[@PaulieDetmurds]

That was so outstanding! That was FUN!

[@slimjim119]

mic works great ty for cold starts and first ride of spring

[@RexinileTheCreator]

Video Vlogs sound great! keep em up man really enjoy them :)

[@hopaktruck]

Looks and sounds great. Can't wait to get mine done. You MUST leave the stack, or some sort of stack. A diesel tractor has to have one. It just wouldn't be right otherwise!

[@Fearlessfront]

hopaktruck I hear ya, but after breathing it for over a year, I'm getting sick of smelling it. It really sucks on long trail rides. Plus, it sits at ear level, so it's really loud as well.

[@beesrhere590]

Just a thought on the stack if you move it forward and make it a tad taller it should reduce the fumes that's how I have it my tractor and it blows more smoke than the diesel because it burns oil

[@jakesnake_27]

Audio is great, nice romp!

[@rupertdetj521]

Beautiful!!! I have one like yours, but mine is gas engine, hydrodrive. 1978 or 1979.

[@emutiny]

romping season is finally here!

[@charleslambeth4358]

Looking good, sounding good.

[@harrybarlow8350]

Really, there isn't a lot of point in the bridge being there! From the videos you upload, it seems that you prefer to trash through the ditch! Love it ;)

[@JoshKilen]

the reason your starter stopped is the compression stroke of the engine and nice pull start the audio was perfect

[@Fearlessfront]

Josh Kilen It usually turns it over no problem, I think the battery is just weak

[@JoshKilen]

Fearlessfront need a 18 hp opposed twin briggs andstratton engine? that only needs a clean air filter and tune up?

[@thomaswilkinson3468]

Outstanding tractor skills

[@MTD12HPTURBO]

I think you should put the exhaust out by the rear wheels like the Murray

[@rex4x4]

Your son must love the new style vlogin type tractor vids.

[@Fearlessfront]

Rex4x4 Yeah, but in all fairness, he love all of them!

[@noahjacobson9192]

The new mic worked great. Great video

[@lucakugler1096]

I love this Mower.

[@benperrin143]

You have the best lown tractors

[@ratedredneck96]

Fearlessfront How hard would it be to refurbish a sears? I have one almost just like it with the stock 16 horse onan twin. I was thinkin about cashin in on the onan cause they are expensive to repair but i may try to clean the points and stuff to get it runnin. I have the main frame of the sears but the hood is gone sadly. I still have the massive transaxle but i pulled it out to maybe use it on another mower. What do you think i should do? Your videos are great and i watch all of them so keep up the great work. Stay strong and romp on.

[@offroaddreams477]

Audio was great video was alsome glad you got the beast out I just helped a friend put a Honda gx690 on his sears suburban 16 lol I also put Dooleys on my Sears suburban 12 works great with posi of course like to get some of my friends and I to go for a road trip to your state but that's a long hall for some garden tractor mud romp lol

[@Rustbelt_Research]

Fearlessfront Awesome!! Man, Love that Diesel sears!

[@zeljkobjelac1]

omg !!! fearless front is the best !!!!

[@thefinalfrontear9870]

Taller stack needed is all. Chooch it up and away I say. Smaller bore would fire it further up too. No bend at top to slow it down. No rain cap to rattle, maybe a bean can...

[@lazarevic95]

This is so cool, you've inspired me too try and do a build. Hahaha.

[@slimjim119]

sounds great Todd

[@lukekendakk8547]

i love the sears the sound was great

[@christopherpisha4392]

It's like that old "George of the Jungle" joke... "Hey, George...!" "Watch out for that tree.!!" (SPLAT.!) I think you need a square tube "push bar" protecting the front end. You shouldn't use the nerf bar style though it wouldn't look right with the square style lines. That tractor would also look incredible with stainless accents around the vent holes on hood and maybe flat stainless wheel covers. Damn... I have to start looking for a sears.!!

[@edwardwebb2915]

Awesome tractor this one. Does your gas pedal go onto the throttle or the governor? Thanks.

[@QuentinWhitelaw]

That looks like a lot of fun

[@starpuss]

*Stacks are cool, But I always think that IF/When I flip mine that stack could kill!* _Last week I did a little test with mine and she almost flipped lol!_

[@inkfrek1715]

I love ur sears bud

[@Lanninglongarmmowing]

Love the vloging videos!!

[@thecooldude615]

It sounds amazing!! Homie!!

[@Odd_Redneck]

Oh...so happy! I cant wait to show off my project! Ugh...Electrical Engineering...i love it so much i hate it.

[@WeldstarCreations]

Audio quality excellent. Unbelievable low rpm torque from the diesel. with its ground clearance, the Sears can outdo many conventional 2 wheel drive atvs and probably some 4 wheel drive ones as well when tackling the really rough stuff. The Sears transaxle is stronger than any conventional ATV drivetrain as well: That tractor had an actual ground breaking plow attachment available. I would move the muffler and also construct a more substantial front brush guard.

[@Fearlessfront]

WeldstarCreations Definitely going to move that stack. It's been driving me nuts lately.

[@xxdigitaldemonx8858]

Picked up really good man

[@codysturdivant976]

I'm huge fan of old desile sears

[@dunbar837]

There is some awsome torque in that motor what do you call that engine. I would like to upgrade to to similar on my lawnflite mtd 11.5 hp. Its touching 30 years old and still cuts my lawn...

[@mudboss-danlapointe6449]

the video and audio quality works great

[@galaxie500xl7]

You have the best of both worlds. One that will go fast on trails and still play in the mud. And another one that may not be as fast, But will pull up stumps. If you were to tie these two together, as far as pulling goes, The Sears would pull the Murray all over the place. But the faster one, Seems to me would be the Murray.

[@Fearlessfront]

GALAXIE 500XL Yep! right on the money! The murray gets your adrenaline pumping, whereas the sears is more relaxing and comfortable to drive. Capable of going through waaay deeper mud too!

[@tool717]

Awesome video bro sears always fun too see audio sounds damn good bro ...

[@Fearlessfront]

Tools of the trade and everyday life with Thanks!

[@Coalblack79k10]

Ever thought about adding a 4x4 front axle to the sears like putting a rear axle off a all wheel steer mower flipped around on the front of it making it a 4x4 ???

[@spudrubble]

New audio setup works great. So if one was to build a tractor of that size what series Sears Suburban or even other brand would you think would work? That seems to have more than enough pulling power and grunt power. I read on many places about making sure you get the right rear end or transaxle to make sure they are good and strong. Sadly when I try to research this it seems tons of mixed information. My daughter whom is a small person just wants a good solid smaller platform that she can use for place. Your build there sure seems like its a beast that would out pull anything around of that size.

[@Fearlessfront]

spudrubble It's pretty rugged, this one has a 633a38 transaxle in it, has round 1" axles, other model's have a hex-bore instead. Supposedly they aren't as strong, but they're probably fine for mudding and pulling around the house... I think the people who competitively pull are the one's who find the weak points.

[@lemmonboy22]

+FearlessFront (Todd Christopher) 2k cash in hand i live in your state about 2 hours away can we scedule a date to pick it up?

[@daw7189]

I agree with redlinemotorsports, stacks are cool but not very practical on anything else but a pulling tractor. Maybe you can install a counterweight somehow to balance out the offset engine???

[@prancstaman]

Nice little romp. Maybe do one with that one doin a wheelie, LOL.

[@brodieward8560]

I honestly thought you were for sure stuck on that first bit.. Proved me wrong nice

[@neathway382]

Audio is much better with the mic. Much much better.

[@derrickdesfosses8725]

Fearless for your next project you should try and make a 4wd lawnmower with a 20hp lawnmower engine

[@carshowkid51]

Awesome video!!! Love the vlogging... And if I was you when you made the sears... I would of made a pulley jackshaft too keep the weight of engine even... So you could drop into mud holes...

[@Fearlessfront]

carshowkid51 there's no space for a jackshaft, as it is I had to slide the grill forward 1" to fit the motor. If I centered it, then the clutch would hit the engine block when pushed in. My options were pretty limited with this motor because of it's size

[@carshowkid51]

Fearlessfront gotch ya! yeah that is a big motor to fit in a tractor

[@ericmeyers2122]

I like it. Also Great video!

[@NorthernBackWoodsman]

Could you do a video about tire chains for off-road/snow/mud use

[@silv6301]

Nice! I like this

[@redneckbryon]

Curious to know when looking for your next project or stuff in general how often do you use Uncle Henry's or do you prefer Craigslist?? Please correct me if i'm wrong you are in Maine, I believe that's the State, Uncle Henry's is based out of. Love your diesel tractor, pretty much your diesel tractor is why I built mine.

[@Fearlessfront]

redneckbryon Yes I am in Maine, I actually use both. Leave no stone unturned!

[@redlinemotorsportts]

Sidepipe diesel? Stacks are just really inconvenient. Rocked one shortly but it's just a pain, worry when you roll over and get covered in fumes.

[@Fearlessfront]

***** My thoughts exactly!

[@TepigmanMessgaming]

It's great nice view!

[@kalebwilson4484]

Keep up the good videos

[@joeybernard4475]

Hey fearlessfront are you going to do a video of mud king tractor

[@mannyrodriguez8711]

Are u going to make a pt 2 on the off road trailer

[@rakselectric7390]

You could put that same exhaust at the back so the smoke can't get you just need to get a longer pipe

[@loganlovejoy5838]

That thing is a beast😝

[@charlesh3632]

Nice bilds keep going good video

[@Swingmon]

I like your back lights on the dodge

[@Fearlessfront]

Swingmon Thanks!

[@COWGIRLMOTORSPORTS]

On 633a's 1st hi is 3rd gear and 3rd lo is 4th gear.

[@dalewissmann6786]

Would a 10x20 tire fit on a 8 inch rim? And the audio works great!

[@thecooldude615]

I think the audio blog is a good idea bro make more videos of your Sears diesel bro!

[@ajjaimes1395]

audio is good think you should keep with it good to see the sears running good

[@Fearlessfront]

***** purr's like a kitten... a very smokey kitten.. haha

[@downpacktv3990]

i dont know if this is possible but with ur skill you can prabably make a turbo diesel sears

[@matthewhersh893]

Nice really nice Fearlessfront . Also perhaps you get any stickers in? Thanks ! Nice Job Dude !

[@rodneystroud7132]

I have a old 60s Sears it will pull anything

[@jacobsanders5102]

how fast does it go because I got a mower that in building and i got a 3cylinder turbo diesel I'm gonna put on it

[@reefranger38]

Sweet! I need that!!

[@anelmujovic8536]

Hey I am built pretty buck the same tractor but idk how to set all the pulls and all that up. But right after I am done I get to build a race lawn mower I only got 2 tractor for my birthday that all I wanted

[@WC-Carpentry]

Put outlaws on it, make those vampires look bald

[@danielhanemaayer9285]

How would u lock a single speed trans axle with a a case over the spider gears. i watched ur axle locking vid and u tack welded and took out the spider gears and pin to finish the welds. how would u do that to a single speed with enclosed gears?

[@dieselenginescrazy8763]

When are you going to make a toolbox /shop tour or update like the videos

[@daltonarnaud6366]

i really need one of theses sears !!!

[@jonathanharris6699]

I'm a little bit new as a viewer to your channel so please excuse my ignorance but the sears has like a 2 speed gearbox in relation to the trans? I ask cause I noticed a few times you mentioned low and high range

[@murica9746]

Jonathan Harris it's got three gears and reverse it also has high and low range settings for all gears except reverse

[@jamesmaroon6161]

hey fearless where is good place to get tires? I need to get some for my riding lawn mower. Hey an idea why not put that exhaust out back. just a thought. see ya man.

[@Fearlessfront]

James Maroon I always get them on ebay, seem to consistently be the cheapest place I can find them

[@westinpatterson7486]

Very Good sound

[@lilpaul198969]

Hey christopher, I just got a 75 ss18 imma build. What is your pully sizes that you run on this rig.

[@BeMad4M3XD]

you should put really cheep bucket racing seats on that

[@shotgunsnmudmowers8167]

didnt the sears have swamp light tires on it back ????

[@weisstalbot5842]

Do a start up of the racing mower and go kart like the vids man

[@reecevalmudman2506]

Would the Sears be anything like a west wood