Must-Have Woodworking Tools to Buy on Amazon | Chamfer Plane, Rip Jig, Pocket Hole Clamps & More!

  Рет қаралды 11,473

NuKraft Workshop - Woodworking & Furniture Rehab

NuKraft Workshop - Woodworking & Furniture Rehab

Күн бұрын

Пікірлер: 52
@scottchladek1770
@scottchladek1770 21 күн бұрын
Love these videos and your down to earth, honest assessment of the tools and items. Thank you for the helpful info, looking forward to the next video
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
I appreciate that and thank you for commenting 🤟🏼
@andygfd1839
@andygfd1839 21 күн бұрын
So many great options!
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
Thank you!!
@patgreen360
@patgreen360 20 күн бұрын
Thank you for the information
@NuKraftWorkshop
@NuKraftWorkshop 20 күн бұрын
You’re welcome and thank you for watching
@pattyanndoyle502
@pattyanndoyle502 20 күн бұрын
I love Amazon.i live in a small town and I save a lot of money but I also get things I can’t get here. Thanks for showing some items I need for my shop and that they work. ❤
@NuKraftWorkshop
@NuKraftWorkshop 20 күн бұрын
You’re welcome and glad you found a few things you could use!
@rayw1613
@rayw1613 21 күн бұрын
Thank you Tim
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
Hey Ray!! You’re welcome and hope you’ve been well 🤟🏼
@mikeimbrogno4150
@mikeimbrogno4150 21 күн бұрын
Great video! Love your channel
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
Thank you so much 🤘🏼
@Chadelon
@Chadelon 21 күн бұрын
I will be buying all of these!
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
Thanks Chad!!!
@ALFREDDUHON-lq9dp
@ALFREDDUHON-lq9dp 20 күн бұрын
Great video and info
@NuKraftWorkshop
@NuKraftWorkshop 20 күн бұрын
Thank you so much! Appreciate the support 🤟🏼
@davidmata5080
@davidmata5080 21 күн бұрын
I like that feather board. I need to get that for sure. I could use the pocket hole clamps and the corner clamps. Filling my cart now! Thanks for the great tips.
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
The feather board is absolutely awesome. Easiest adjustment but yet so simple
@davidmata5080
@davidmata5080 21 күн бұрын
@ I was sorry to hear about your accident on the table saw. I had a similar problem on my miter saw this week. If you know of any tricks or jigs to securely hold a tree limb in place on the miter saw I’m all ears. Thanks
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
@davidmata5080 lots of clamps… You can never have too many clamps 😂
@davidmata5080
@davidmata5080 21 күн бұрын
@@NuKraftWorkshop Sadly I have lots of clamps but neglected to use even one. I won’t do that again
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
@davidmata5080 my wife wanted a bunch of discs cut from a fallen branch in our yard and I created a sled for my table saw where I could clamp it down and cut the discs safely. Always claimed that stuff down… If that gets away from you, that would be ugly
@pkk6428
@pkk6428 21 күн бұрын
Always great info
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
I’m glad you like it… Hopefully I showed something you need this time🤟🏼
@zand987
@zand987 21 күн бұрын
I like this format.
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
OK great. I changed it up last time and it didn’t go over very well 🤷🏻‍♂️
@BrandonCabanillas
@BrandonCabanillas 21 күн бұрын
Eyeing that mile craft glue bottle. I did purchase a thin rip guide. I'm seriously thinking about purchasing those screws. As always, great ideas and food for thought. Ty
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
The screws are absolutely the same exact screws you’re gonna get at the big box stores at a cheaper price. I really do like this glue bottle. I have one filled with titebond 2 and the other with type 3
@RedProg
@RedProg 21 күн бұрын
Lionmax wood screws , good quality and best price out there. 👍
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
💯 correct
@TheCarpenterGirl1984
@TheCarpenterGirl1984 14 күн бұрын
Xin chào 👋👋 mọi thứ đều tuyệt vời cám ơn đã chia sẻ ❤🎉❤🎉
@NuKraftWorkshop
@NuKraftWorkshop 14 күн бұрын
Thank you for watching and thanks for the comment…. 🤟🏼🤟🏼
@a9ball1
@a9ball1 21 күн бұрын
Glue bottles, i tried the bot one first then I bought the Milescraft one. The Milescraft is my goto and the other one is in the trash. Not only is it a better price it's also a better product. Milescraft is the only way to go.
@Gazman299
@Gazman299 21 күн бұрын
Yep, completely agree.
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
So far I have to agree. Works exactly like I wanted it to
@markgorton5865
@markgorton5865 21 күн бұрын
It’s that going to be a fence picket snowman I spot in the background? If so looking forward to that video. I have the glue bottle and really like it.
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
Good eye Mark…Friday 🤘🏼
@kimberwest7304
@kimberwest7304 21 күн бұрын
I’m new to using the table saw so honest question about the feather board.. is it safe for it to be so tight due to the board binding and possibly a harder kickback? Like I said, I’m learning. 😅
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
Not a dumb question at all. You want your feather board tight, but not so tight that it’s difficult to push your material through. The purpose is to keep your material up against your fence and straight but if you’re struggling to push it through, that’s probably too tight and could cause problems
@corleytwidwell9324
@corleytwidwell9324 21 күн бұрын
Where do you get the shirt you wear?
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
amzn.to/4fWzsKW
@NOCOVET1
@NOCOVET1 20 сағат бұрын
There is 57 reviews with a 64% rating on the corner clamps you recommended. I do not think they are worth buying. There are better kits available with a higher rating and more reviews. I think products should have at least 200 reviews with 70% as five star before they are even reviewed. (in my opinion) . Merry Christmas Eve from Northern Colorado (the 51st State). :)
@NuKraftWorkshop
@NuKraftWorkshop 19 сағат бұрын
It’s possible that I linked to a different set. You know how it can be on Amazon with multiple products that look the same. Regardless, my set that I received is perfectly square and I wouldn’t recommend anything to my subscribers that I didn’t feel was worth the money. Merry Christmas to you and your family as well 🤟🏼🤟🏼
@davidslack2164
@davidslack2164 21 күн бұрын
The double sided tape at Rockler and Woodcraft is not as good of quality as that XFasten tape. The XFasten is far more reliable than other brands I’ve tried.
@NuKraftWorkshop
@NuKraftWorkshop 21 күн бұрын
Yeah I agree… That stuff is awesome
@merikatools568
@merikatools568 17 күн бұрын
Some things were more expensive than you stated, do you need my address to mail the refund or do you need my PayPal?
@NuKraftWorkshop
@NuKraftWorkshop 17 күн бұрын
You’re saying some of the things happened that I stated at the beginning of the video might happen and that I have zero control over? Almost like I knew that was a possibility 😂😂
@DirtDiving77
@DirtDiving77 18 күн бұрын
Great video like always!!! Thanks!!!
@NuKraftWorkshop
@NuKraftWorkshop 18 күн бұрын
Awesome… thanks for the support 🤟🏼
Beginner Woodworking Tools to Avoid: Watch Before You Buy!
12:29
Biscuit Tree Woodworks
Рет қаралды 227 М.
I Discovered a Woodworking Cheat Code. Seriously!
13:19
Make Something
Рет қаралды 74 М.
When you have a very capricious child 😂😘👍
00:16
Like Asiya
Рет қаралды 18 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
Woodworking Tools to Buy at Amazon & Save Money On !!!!
9:24
NuKraft Workshop - Woodworking & Furniture Rehab
Рет қаралды 223 М.
I don't get why people don't build cabinets like this?
33:42
Lincoln St. Woodworks
Рет қаралды 649 М.
Scrap Wood to Snowman Christmas Decoration
9:38
Pelado Creations
Рет қаралды 7 М.
10 Genius Woodworking Tool Upgrades that are On Another Level!
27:43
731 Woodworks
Рет қаралды 462 М.
Don’t Break the Bank: 10 Essential Tools for Under $30
13:23
Matthew Peech
Рет қаралды 114 М.
7 Clever tools few people know about.
12:42
Stumpy Nubs (James Hamilton)
Рет қаралды 133 М.
I Bought 4 Incredible Tools Off Amazon For Less Than $25!
14:35
Flynndogg Woodwork
Рет қаралды 47 М.
Why Doesn't Every Woodworker Have This?
13:09
Biscuit Tree Woodworks
Рет қаралды 130 М.
This weird clamp will save you hundreds $$$
14:49
Busted Knuckle Woodworks
Рет қаралды 166 М.
INGENIOUS TOOLS YOU'LL WANT TO BUY
20:54
TechZone
Рет қаралды 52 М.
Extreme off-roading on a narrow brigde #shorts #shortsvideo
1:00
DASH CAM CN
Рет қаралды 11 МЛН
Что случилось у Ники в государственном саду?!😳
0:51
Привет, Я Ника!
Рет қаралды 4,1 МЛН
Баранина - прыжки в бассейн 🌊🐏
0:42
NEMI ROMAN
Рет қаралды 3,7 МЛН
Sorvete de Danoninho
0:57
Spider Slack
Рет қаралды 33 МЛН