My truck on initial start up after having transmission built by Mayes Performance and headers and air filter housing coated by Nitro Plate
Пікірлер: 104
@oellrichm15 жыл бұрын
They are shorty headers from pace setter, no dyno run yet but using some calculators online its been estimated at 330hp based on wieght and 1\4 mile time and the G-Tech meter gave a 0-60mph in 5.3 sec
@BigNick419andholding13 жыл бұрын
@Revanjd Amen! This Dakota's a monster, no doubt. I hav a late '91 with a Mag 5.2 and love it! 1st gen Dakotas are the best, especially these early to mid 90's with the V8 plants.
@340dakota65 жыл бұрын
Love this in black, I went orange and a '71 340 in my 1991. Nice build for sure, sounds mean!
@oellrichm14 жыл бұрын
@AndreTheGiant69 It is a mesh that over lays the grille, found it on ebay, mine was originally the 318
@oellrichm16 жыл бұрын
wiring is identical , just swap out the long block everything off the 318 bolts to it, the 318 pcm will run the motor, but do recommend upgrade to the mopar performance pcm for the 318 to run the 360
@oellrichm16 жыл бұрын
Its all in the bumpy stick. A Comp Cam 264/274 .512 lift, headers and mopar performance pcm
@oellrichm14 жыл бұрын
@oldmanalex01 I got the wheels from summit racing, they are cragers "soft 8" model, The 5.9 magnum long block bolts right in, just transfer your intake and computer sensors, The pcm has enough in it to fuel the bigger motor with out mods, I opted for the mopar performance pcm for my year truck with 318 and it work very well.
@dylanplumley280 Жыл бұрын
I got one of these for Christmas when I was sixteen. The body and interior were nice. But the truck was mechanically shot. Biggest piece of shit I have ever seen. I tore the engine out. The seats, mirrors and tires. the bed of the truck was perfect so I converted it into a trailer. Damn good trailer too.
@oellrichm15 жыл бұрын
I'm also using the HV oil pump and The steel mounts have been in place for about 5 years now with no harm to the motor, there is some more in cab vibration but knowing the motor is secure i can live with some vibration
@oellrichm14 жыл бұрын
The 3.9 and 5.2 magnum engines were introducted in 1992 model year, The 5.9 magnum engine was put into production for the 1993 model year.
@oellrichm14 жыл бұрын
Summit Racing, they are "Pace Setter" brand shorty headers direct bolt on when you remove the exhaust manifold
@ur2ndurlast15 жыл бұрын
You can get them on ebay. They have both the headlights and turn signal lights.
@Spywell15 жыл бұрын
Thats the turn signal lights/housing, get them from ebay for cheap. In fact go to ebay and search "DEPO CLR BUMPER SIGNAL LIGHTS" They are OEM, Clear, fits your truck and they are only 16 bucks for a pair.
@oellrichm14 жыл бұрын
@TheRroocckkeerr Its a264/274 dur / .512 lift but with the 1.7 rockers lift is increased to .542
@oellrichm15 жыл бұрын
Not sure what you mean by wibble wobble, My motor stays put in my truck with solid steel mounts i built after tearing several of the oem style ones.
@oellrichm14 жыл бұрын
@frankenstein04 actually it took a couple bumps to get fuel pressure up on the injection rails for the fuel injectors to work properly
@OzniWellman15 жыл бұрын
might have to see what you got going on there if you got pics of the mounts and see if I might want some those.
@oellrichm15 жыл бұрын
Never on the dyno but ET vs Weight puts it about 330 at the flywheel.
@nick05514 жыл бұрын
That is sick...
@oellrichm14 жыл бұрын
@blueangel1980us yes discount tire can get them but that seems high unless they come with tires on them for that price, i got 6 wheels and 4 centercaps for 240 through summit racing when i bought mine
@jackperry9369 Жыл бұрын
Sounds like a garden tractor needs an LS Chevy 😂
@oellrichm11 жыл бұрын
Yes they a Cragar Soft 8 , 15''x8'' 6 lug
@frankenstein0411 жыл бұрын
Yeah I realized that wasn't correct.....2 years ago. Thanks for your contribution.
@oellrichm15 жыл бұрын
I'm using a custom build dual fan I built for mine, its a combination of a small 10'' fan i think with out measuring and a fan from an 86 buick century 4 cyl (fwd car). my combo keep engine around 180*F in summer with ac at full blast (160 thermostat)
@fox3228815 жыл бұрын
nice sound dude are those shorties or long tube headers you got on there? Have ya done a dyno run yet? thx for the respone
@frankenstein0414 жыл бұрын
@oellrichm nice trucks eh? Ih have one that is a 4x4 and came with a one of a kind factory paint job..its metalic olive pearlecent green...its crazy like it says it right on the dodge sticker...so its not like someone just painted it...my dad has a 1971 hemi orange and black dakota and also has a 95 4x4 5 speed like myn...we loooooveee these trucks...the interior is SO easy to customize
@haggman715 жыл бұрын
Ahh man, sounds great, good work. I'm probably getting a 1992 dodge dakota 4x4 this weekend. It's got the V8 Magnum, and only has 90,000 original miles. He's selling it for $3000. Cant wait to get it, hopefully someday i'll put a bigger engine in it, maybe this size. But once again, that sounds amazing.
@oellrichm14 жыл бұрын
@butkis92 In the video I have Pace Setters and they are a shorty 1 5/8'' primary tube and 2 1/2'' collector which conects to stock Y-pipe, Since then I have upgraded to Doug Thorley Tri-Y headers and they are 1 3/4'' primary tube and 2 1/2'' collector and connecto to doug thorley Y-pipe which is 2 1/2'' mandrel bend pipe. way better than stock pipe
@jaiBavet13 жыл бұрын
Oh hey buddy sorry about those bears.. wish us luck.
@oellrichm15 жыл бұрын
Ok, by wibble wobble are we talking about a slight idle surging?? If so it is a worn bronze bushing at the bottom of the distribitor in the block causes erratic timing leading to idle surge
@OzniWellman15 жыл бұрын
I used the ol A518 under there as for 727 I got one those in my other Dakota with 440 big block
@jaiBavet14 жыл бұрын
da bears lol... hey Oellrichm... ive seen you all over the internet with your truck and i think its awesome.. Im from Kenosha Sconsin and im slowly rebuilding an 87 dakota. I know this is weird but i was wondering if you could help me.. maybe like when looking for parts or mechanical advice. All i would ask for is your e mail address... anyways nice job i like the black paint job and tire set up. I dont know if i would do the hood the same but it looks good.
@goodolecountryboy75504 жыл бұрын
I know this comment is super old but ever heard of a place called cnc offroad
@oellrichm14 жыл бұрын
The Grille itself is OEM, The mesh inserts I got off of Ebay.
@oellrichm15 жыл бұрын
Ebay my friend. Dakota stuff is kinda hard to find so check often.
@oellrichm15 жыл бұрын
Yes, I got my headlights, turn lights, and side marker relectors from ebay!!!
@oellrichm14 жыл бұрын
@jaiBavet Just hit me in the PM here, I check the tube often and also have repainted the truck last week, will have a video showing it later as well as more racing vids
@oellrichm14 жыл бұрын
@limpioo They are cragar wheels
@jaiBavet13 жыл бұрын
Hey bro ive talked to you before like a year ago. I wish you would put up new vids. I have 87 kota 3.9 wondering if i should rebuild it. Wish you would give me some advice and most definitly tell me where you got those sick ass tires. (how much too)
@OzniWellman15 жыл бұрын
Wouldn't that hurt the motor cause of nothing to absorb the vibration besides harmonic balancer in the engine as for wibble wobble might help if the oil pump was working I went got Melling HV today gotta put that in otherwise its putting out about 180 plus lbs of compression
@AdamHansonDHC214 жыл бұрын
damn that sounds great...
@TheMoparman9412 жыл бұрын
Hey where did you get the headlights and turn signals at? All I can find are the yellow ones and the clear look so much better! Thanks
@oellrichm15 жыл бұрын
The grille is stock but has aftermarket mesh inserts. I got the inserts off of ebay. There is a listing currently active for it, look for item# 170331272990 .
@AndreTheGiant6914 жыл бұрын
i got a 92 dodge Dakota with a 318 v-8, lots of power, where did u get the bullet grill?
@oellrichm16 жыл бұрын
if you already have the 5.2/318 is a bolt in swap no mods
@justin018514 жыл бұрын
mine to i have a 93 dakota extd cab sport with a 3.9
@OzniWellman15 жыл бұрын
Got a 360 in same make and model as your truck just one thing it does a wibble wobble when idle did yours ever do that? plus mine wants to jump out on acceleration even with new motor mounts
@oellrichm14 жыл бұрын
@oldmanalex01 I'm thinking the 408 stroker build for the future with mine, as to retain a still somewhat original appearance
@TheMoparman9412 жыл бұрын
Ive got them on my truck now :D
@OzniWellman15 жыл бұрын
I used the ones that 318 used in that place and as for the wibble wobble Im installing torque strap and see what that does other than that everything from 318 magnum I put on 360 part of my wibble wobble problem is from oil pump its not working.......
@oellrichm14 жыл бұрын
@rankin513 no but you can buy yhem from summit racing online
@mrloudnoiescaraudio11 ай бұрын
What headers did you use....brand or part number by chance
@blowjobjohnson15 жыл бұрын
how much hp are you getting out of that 360? i am building one for my 94 dakota.
@oellrichm15 жыл бұрын
I'm using the A518 (727 o/d with lock up converter)
@oellrichm15 жыл бұрын
I can build oem magnum style engine mounts from solid steel no torque strap required.
@infernous16 жыл бұрын
Where did u get those headlights
@oellrichm6 жыл бұрын
TrainC0nduct0r the headlights are factory style replacement from eagle eyes. The clear side markers and turn lights i found on ebay.
@jaiBavet14 жыл бұрын
PLEASE PUT UP MORE VIDS
@Trav4colts12 жыл бұрын
I just found them on ebay. for them headlights and turn signals its around $150.
@bigtitottv88184 жыл бұрын
Where did you buy the headlights
@bobweaver459213 жыл бұрын
hey how much did you pay for your pace setters? im looking for a set for mine prefferably cheap since i intend to run dual 3's and il need to hack the 2 1/2'' collector
@oellrichm14 жыл бұрын
@nick055 just wait till my video coming in april, if this is sick then will it be wicked sick thank to some parts I bought from Hughes Engines
@borntoberebel1213 жыл бұрын
holy shit you dropped a 360 in that sum bitch?! i got a 96 dakota it got the 3.9 wish it had the 5.2 but i still love it. truck its fuckin sexy man love the sound. is it cammed?
@counterman414 жыл бұрын
where did you get your grill.
@stevenhilbourn40556 жыл бұрын
I 've got an 89 Dakota convertable im dropping a 360 in. Did u have to change alot of stuff to do it in yours?
@oellrichm6 жыл бұрын
Steven Hilbourn mine was a 318 truck from the factory so was literally just drop in and go. I think 3.9 truck theres not much to change around
@butkis9214 жыл бұрын
how big are your headers ?
@jonathanfreedom1st4 жыл бұрын
Open headers. Very refreshing. Like a woman wearing no top
@79dodge4ever13 жыл бұрын
where did you get the grille inserts?
@DickVanDyke8D12 жыл бұрын
what type of wheels do you have on that dakota?
@oellrichm15 жыл бұрын
It has been in a few magazines but it mine is black
@oellrichm14 жыл бұрын
I have done my research. Maybe you should do yours. Go ahead google "dodge 3.9 magnum engine". Pick any results from allpar, wiki, or other countless forums.
@oellrichm12 жыл бұрын
@TheMoparman94 found them on eBay
@oellrichm14 жыл бұрын
@Kdubslugga Its an 86
@jonathanfreedom1st4 жыл бұрын
How do I put a 5.9 in my 1993 dakota? Any tips?
@oellrichm4 жыл бұрын
If yours was a factory 318 you can literally just drop it in, use the long block transfer your manifolds and sensors, use the 5.9s damper, flexplate and torque converter.
@oellrichm16 жыл бұрын
I found them on Ebay. :)
@kalebbrawand74926 жыл бұрын
What size wheels and tires you got on your truck? I got a 408 stroker in my 93 2wd and the stock wheels and tires just wont cut it. Im trying to get the widest wheel and tire as possible on it.
@oellrichm6 жыл бұрын
Kaleb Brawand Cragar Soft 8 15x8 235/60R15 up front and 275/60R15 on rear
@oellrichm6 жыл бұрын
Kaleb Brawand checkout newer videos of mine. Im now running a 426" stroker 5.9
@kalebbrawand74926 жыл бұрын
oellrichm do ou have any issues out of them because arent 275s a little wide for 8 inchers?
@kalebbrawand74926 жыл бұрын
What kind of tires are they? (Im looking at mickey thompson street st tires) And how good are they on the street/strip? Because im going to be driving mine regularly with the occasional trip down the track.
@oellrichm6 жыл бұрын
Kaleb Brawand the 235 up front fits well i have used 225 no problems. I am actually currenrly using the mickey thompson sportsman s/t tires now and the actually do pretty well both wet and dry
@sheriffDrod8914 жыл бұрын
@RiLow517 go do your own research...just try coming back here without your head hanging in shame and embarrassment.
@sheriffDrod8914 жыл бұрын
@RiLow517 ... i have a 1992 Magnum V8 5.2. how much money you wanna give me? lol
@gaminghd68783 жыл бұрын
Siiccckkk
@oellrichm15 жыл бұрын
About $700
@metaltera8613 жыл бұрын
oh my
@x2daz1111 жыл бұрын
Look like Cragar Soft 8's
@oellrichm15 жыл бұрын
I'll get outside and get some good HQ photos of them, pvt msg an email i can send the pics to
@frankenstein0414 жыл бұрын
lol epic fail the first two times no back preassure