My 2024 CUSTOM Video Editing PC Build 💻

[@JMarciii]

Yes, we want to know about file management, at least I do!

[@theTechNotice]

Thanks for the video linking bro! :) Also, , you've got your AIO fans set the wrong way (Pushing air out from within the case), you're exhausting from the front. Instead of - Pushing cold air into the case through the radiator, intaking from the front. You'd get much better performance if you flipped the 3 fans on the radiator :)

[@MohammadRaihanShams]

@thetechnotice the only guy who atually cares more about us then gamers

[@huzaifazkansa]

Please do save his card graphics please please for put the important stand for his card graphics 🙏please please he must does these things before big tears come out before all bad things happen. 🙏please please.

[@UrsoValen]

When choosing a motherboard make sure to also match the chipset to the CPU! So with intel the B#60 is for i3 & i5 and the Z#90 is for i7 & i9. You could mix and match them too but you'll be leaving some performance on the table if you pair a B series board with an i7 for example

[@lacyberlin5267]

After watching this video, I decided to build my own PC for my content creation! Thanks for the inspiration. I am so excited to build my first PC!

[@leeez907]

I'm a PC builder and also an amateur photographer. Few things I noticed except from the cooler being insufficient for the 13900K's TDP is you should have placed your NVMe storage on the slot closest to the CPU cuz it's directly connected to the CPU and should perform a little bit faster. Also, I'm not sure if your fan config is wrong on your new AIO but, if you used reversed fan blades for your front fans it should be good. But, if it's just normal fans the airflow is not optimized and could cause some performance hit. But overall, very nice PC and video bro!

[@lassekalhauge4801]

My Mac Mini with M2 Pro 16 core neural engine and 32 gb ram performs totally mind blowing with DaVinci Resolve. I made a switch from Adobe Premiere and do not regret. Way way better for both editing, color grading and effects. I think that DaVinci will take over the high end pro industry ❤

[@cancanman]

Thank you for your comment. I'm looking for an editing PC and you answered all my questions in advance 😊 I'll go get a Mac mini with m2 pro now. By the way, since you mentioned you switched to DaVinci Resolve, does the Mac not run Adobe premiere properly? Thanks in advance!

[@lassekalhauge4801]

Hi there - I only have experience with Premiere on a MacBook Pro with Intel i9 processor, which was okay. Since Adobe Premiere Pro now supports Apple Silicon natively I think that it will perform very good too. Best regards 👍

[@JohhnooTheBeast]

I'd like to see your work flow to editing a video. I always get so overwhelmed with clips and really struggle to manage what I've filmed to put the pieces together like I imagined. I'd love to see how you film and edit such lovely videos

[@balancedboys]

What I recommend is separate the video files in 3 steps. 1) the days you filmed (ex: day 1 [clip 1 - 5] - day 2 [clip 6-10]) ect. and do the same for audio files, if you recorded audio separately. 2) label everything. The Labels should look something like "Park Wide take 1" or "restaurant OTS take 3" Or "Garage BRoll take 1". Also label the audio files the same exact way as their corresponding video clip. This way also highlights the importance of slating if you are wanting to match separate audio and video files together. 3)group the videos according to the scene in which they are a part of. This is my favorite and helps to keep me focused on what's next. (ex: Park scene [clip 1-5] - restaurant scene [clip 6-10]) ect. Typically, in the beginning I will start with SO step 1) - 2) -3) in order will help quite a bit and will give you much needed time to get familiar with your footage before even starting postproduction.

[@JohhnooTheBeast]

@@balancedboys this is a fantastic reply. Thank you ever so much!

[@balancedboys]

@@JohhnooTheBeast Of course! Hope it helps.

[@UrsoValen]

So far I've been editing video on 32GB Ram and it's been running like a ray of sunshine. I don't edit 4k that often but even that seems to not have too much trouble running. I used to edit on 16GB so this is already a major improvement

[@jeffreyeditz]

Yo bro, why don't you post videos again

[@UrsoValen]

@@jeffreyeditz Woahh how did you find me, might post again next week

[@jeffreyeditz]

@@UrsoValen 👍

[@wglee010]

I’d like to see a file management video, I’ve looked before for videos on the subject but couldn’t find any good ones.

[@kinghezekiah07]

This was great, enjoyed this video, and loving seeing the notification when you post. They are always bangers! Also I loved the car examples for cpu specs 😂

[@doganaydogan1178]

Can you compare editing and exporting a project on both your new desktop and m2 MacBook?

[@j.a.costapneus-marlenedeca8029]

Thanks for your video, very illustrative, very simple and very effective.

[@HeadlessChickenTO]

I uavent build a PC in ages. Like still using "DVD-R and floppy drive" ages ago. Even new budget PCs today are cleaner than some of the more expensive gaming PCs of way back when. I fairly recently did a "new-ish" build to replace my 15 year old home build rig. I had a gen1 i7 on am ASUS motherboard, 32gb DDR3 duals, booted off a Samsung EVO870 1TB SSD, played off an RX470, had a DVD-R and a blu-ray drive (which was never ever supported), had an old WD 7200RPM 1TB drive for storage, and a Thermaltake Shark in silver. Replaced it with a prebuild but replaced the CPU and RAM, from an i5 to a gen9 i7, 16gb DDR4 to 32gb DDR4 duals, RTX 3060, 1TB Samsung m.2 for boot. I also replaced my old 21" Samsung monitor, also as old as the rig, with a 4k 27" Dell (i can't fit anything larger than that on my desk), and the same Logitech gaming mouse as yours. But my replacememt rig i got on the cheap via auctions around Toronto. Its typically a $1600 rig, but i snagged it for $800 (almost $1k after taxes and auction fees).

[@AnthonyGugliotta]

What do you edit your photos/videos on? PC or Mac?

[@connorbrady3651]

Mac Forever!

[@RaidCrafts]

pc photos with gimp until i can get lightroom

[@sammyj349]

PC

[@dany_pap]

Editing on Mac is the most stable option, even on MacBook Air M1

[@bryant9841]

PC

[@garbagechannel8393]

Damn. Your videos are Cristal clear

[@adilkhalifa8489]

i would love to know how you sort your files and more information on it. my files look like a maze

[@ATomBom06]

That would be cool

[@professor_thunder]

Iomega zip drive and dvd burner are a must.

[@yeohi]

and IBM cards!

[@ningAddicted]

Great video and what a fine PC build Anthony. I would like to learn your way to manage files. Please do videos on it

[@theguyofalltrades]

Thanks for this video. I’m experiencing a ton of stuttering now that I record then edit in 4k with my Sony Alpha for all my KZbin content. Doing my research before I build and this has been very helpful

[@mirceapoptean]

You might want to switch around the fans on the radiator, the airflow is bad :))

[@Jossy.mp4]

Thermal throttling is notorious in i7 and i9 cores especially for a sub 240mm AIOs... I love the build, but when you feel like it's time, do consider to upgrade your GPU because VRAM is very demanded when adding effects to your videos... Edit: wow, look at me advising while I use a lenovo student laptop haha..

[@noahmonte8581]

For h.265 10 bit 422 editing, intel or apple are the only choices with native decoding. Of course you could always transcode your footage as well.

[@AnthonyGugliotta]

I find myself making pro-res proxies for most projects, and then deleting the proxies once the projects is complete!

[@TerryDoesTech]

Nearly all modern Nvidia GPUs can decode/encode h265, same for AMD. not sure where you got this information from, but it's factually not true.

[@noahmonte8581]

@HeyItsTerry I guess I should've clarified I was referring to 10 bit 4:2:2 h.265, which currently nvidia and amd dont.

[@raczyk]

Which is qui ker cpu or GPU for decorig? Can you use both at the same time.

[@nabi.dastaran]

Thanks for the great video! I'm interested to know about your file management system. Also, a video about NAS is highly appreciated (in a simple language 😅) ❤

[@ezrareimer]

You said for what you do the 3060 is fine… but to me that seems like a MASSIVE bottleneck, the cpu being top of the line and the gpu an older, budget one.

[@AnthonyGugliotta]

I completely agree, everything else is so fast, that the GPU almost doesn't make sense. I linked a few 4000 GPUS in the description I might upgrade to over the next few months.

[@ezrareimer]

⁠​⁠@@AnthonyGugliottaFair enough. 13900k can easily do even a 4090, so you’ve got lots of upgrade options lol

[@Unknown-i5r8q]

​​@@AnthonyGugliottawait for rtx 4070 ti super 😂

[@phillipschimek7545]

Most of the Programs he uses have not too mich use for the grafikskard... A boatlnack shure but only for gaming...

[@ezrareimer]

@@phillipschimek7545video editing often needs just as much or more gpu power as gaming…

[@TeofilBejan-lg2rt]

The cpu could even be paired with a 4090, but if you have no buget for that, you can just get a 4070ti super

[@columbusReal]

Nice Video. I use a Windows PC too and a Video about your file management would be awesome

[@mrbabyhugh]

6:00 from what i can see, you are going for aesthetic look of the fans and not practicality. First, I would not recommend a one fan solution even on a rad for such a CPU. Next, it is my view that cool air is best to pass through a rad to cool the warm water passing back and forth to the CPU to cool it. I am still looking if there are any more "errors".

[@arjea03]

Im a photographer and for sure will need this PC. Just want to know if this PC can handle games like Warzone or Steam games? Thank you!

[@TechieFelixLP]

Of course, my PC is a potato and it does Warzone some what... I use it mainly as an editing rig these days cuz I stopped playing games.

[@fazented]

In my experience, photo editing does use quite a lot of cpu. it could be because my cpu is 16 years old though... I have to use GPU acceleration to make it actually usable

[@mrbabyhugh]

9:24 ok so i was still right about the one fan on rad, but still the fans at the front should be switched as intake.

[@mrbabyhugh]

11:33 ok depending on the board, if u are going to add more PCIe u may lose performance on 2 of the NVMe. For this reason I had switched from adding more NVMe and use 2.5" SSDs (560MB transfer) for other things other than the OS & programs which are on the main NVMe. One of those SSDs will store Unreal Engine & AI/LLM files, the other SSD for games. An external 2GB transfer speed holds all photoshop & premiere pro work and this is so i can be mobile with those projects from PC to laptop. The ProArt B760 DDR5 WIFI i got has 3 NVMe, only using 1.

[@mrbabyhugh]

oh why i concerned about slowing down PCIe, will be using 2 GPUs, a 4070 Super FE on the PCIe 4 slot for photoshop & premiere pro and for the PCIe 5 slot I'm waiting for Nvidia 5000 series to see what they got to use for Unreal Engine, AI/LLM and occasional 1440p gaming. The 4070 Super FE can get me started playing around in Unreal + AI and gaming, but will need more power and I dont believe in the 4090 (yes it's great but i personally dont believe in using that much wattage and price ridiculous), well 70 series is fine for me, want to see what 5070 has to offer. If I not impressed then it'll be ProArt 4070 Ti Super. on the PCIe 3 slot i might daisy chain some GPUs to do some mining.

[@mrbabyhugh]

6:14 with that GPU, even though the CPU pulls power, you didnt need 1000W, unless you got it for possible future upgrade of the GPU.

[@shawnlabranche6852]

Great video. Our pc build is about the same in almost every aspect. I am interested in the file management system you use. Especially how you use the different drives.

[@alpaca471]

what is the price range for a pc like this?

[@shawnlabranche6852]

@@alpaca471 mine was about $1600-1800 for all the parts

[@digitalco1]

Nice setup bro👍 29 degrees on i913900k , are you editing video at the north pole?😃 btw put a radiator above the pump it will serve you for many years

[@georgesmith3562]

Love the build

[@nathanwinn7873]

negative pressure with fans could be a mistake as well

[@letalik_cz2006]

I love, that you got to build a pc and didn´t just stick to Mac, but there´s a bit of misiformation in the video. 1) you definitely don´t need the 1000w power supply, those are built for folks, who run multiple GPUs or some server hardware. In terms of the PSU wattage calculators, they are almost always way over, just to be safe. You would be perfectly fine with 650w with your current configuration, and maybe 850w if you want to upgrade the GPU in future, and you´ll still have headroom. After all, your PSU is most efficient around 80% load. 2) GPU, GPU, GPU. You definitely want a better GPU. Even if the Canon video somehow wouldn´t work on GPU (but the H265 definitely does), all the renders, effects, noise reduction and colour grading can benefit hugely from GPU acceleration and the fast video memory. GPU literally stands for Graphics processing unit. It is built for this sort of work. Plus you are getting the av1 video codec with new GPUs. But hey, great work after all :)

[@letalik_cz2006]

also, the CPU parameters are too oversimplified. It's like comparing two cameras just by megapixels, but there is not much you can do about it. The best solution is to just look up a couple benchmarks in the field you work in...

[@tylerzeus1]

thank you im glad someone said this

[@YountFilm]

Flip the radiator so the tubes go at the bottom.

[@CFNP580]

Im working with i5 13400 and 4060 combo to edit fx6 footage. Its a bit rough editing 4k but it chews through 1080 with np

[@tommyboy3387]

I'm building an editing PC. I was advised to install 64gb of Kingston Fury Beast DDR5-6000. Hence, when using 128GB of RAM, DDR 5, it will not run at 6000+ MHz because the speed is limited to 5600 MHz since you'll be using 4 modules instead of 2.

[@rangersmith4652]

Mistake spotted: Using an 13900K. Oh wait, we didn't know 4 months ago. Some will say tubes at the top of the radiator is a mistake because it can allow air bubbles to reach your pump.

[@ClockBestEvent]

1, the CPU clock speed and the core count is grossly oversimplified. The analogy doesn't work because you can only compare those two values within 1 generation of cpus. 2 don't put your Mobo to the case at least before inserting the cpu, ram, nvme ssd's 3 for rams you also need to mention the latency value as well as the frequency of said ram as well as its generation 4 the case choice will make the airflow suffer as the front of the case is msotly blocked. You can get good fans and a good airflow case and the performence will be more and the noise levels will be same. 5 Also AIO's are noiser when idle compared to air coolers and unless you're doing custom water cooling they won't provide any significant performance improvement. Yeah otherwise I love your content, great video!

[@PhillipRPeck]

There aren't many/any air coolers on the market that can effectively dissipate the heat from a 13900K. A 360mm AIO is kind of the entry level for this CPU

[@SOLIDSNAKE.]

Bros I need help

[@digitalsaint2040]

you removed the plastic pressure gaurd from the motherboard. the plate "pops" off to keep the pressure even when pulling the down lever to install the cpu

[@kikecolombo]

Nice storage configuration, why do you choose msi motherboard? aorus or tuf are better I think, thanks for the vid

[@lucascardona4967]

Hey Anthony! I want to build a computer to be able to edit RED 5k and 6k footage. Based on what I see on this video, this build should run smoothly, but I'm wondering if there is anything else that should be considered when working with RED Cameras or bigger. Excuse my ignorance, I'm a young director trying to do the assembly for my short films and they were shot with a Komodo RED and Gemini RED. Thanks for making videos like these!

[@TechieFelixLP]

You'll need a really big fast SSD... CPU if you're going with Anthony's config is fine. Maybe more RAM ? On GPU, you don't really need much. 3060Ti is okay as it mostly used in the rendering process and based on my experience, my 1650 Super works just fine with my 4K H.265 100 MBps video. 12 minutes 4K renders after 12-15 minutes. If you go for Anthony's configuration, you'll be more than fine.

[@Prabhu_njd]

@@TechieFelixLP if a person is shooting on red cameras, they're workflow and output demand won't cut it with a 3060 buddy. And they definitely need many 4tb nvme ssd drives. Threadripper is the only cpu platform that has many pcie lanes and cpu power and allows for multi gpu setups.

[@TechieFelixLP]

@@Prabhu_njd My friend who works in a film industry shooting Blackmagic and many other Camera brands uses 1660Ti. He specifically goes for a higher end CPU over GPU.

[@Prabhu_njd]

@@TechieFelixLP there's a huge difference in editing with blackmagic B-Raw vs Red Raw files. Ask your friend which files are easier to edit with his pc.

[@oliviapaige2967]

Do you have a video showing how to build the computer with the gear mentioned/listed in the description?

[@TheCircleCreativeMedia]

Perfect video for me as I’ll be getting a custom pc build soon. I am hung up on getting at least a 4070ti GPU, is 4060 worth getting for the cost saving? I’m interested in your file management, I’m thinking 1tb SSD for OS, a second 1tb SSD for photo editing, graphic design files and Premiere Pro projects, and a super fast 2tb SSD to keep raw video on which will be used in the projects.

[@filmpocketknifepictures8522]

My Issue -- what if you need a PC that can edit both a three hour movie, and a two hour movie, shot with r3d files and a 40:1 shooting ratio (Meaning 200 hours of HQ 6K footage that should not be buffering while editing, which is roughly 200 TB for the footage alone, linked to three server farms for 1 PB storage Each)???

[@Prabhu_njd]

@@filmpocketknifepictures8522 amd threadrippers and multi gpus are the solution.

[@WickedroU]

the 3060 is a really good card

[@RatRugRug]

Thing is, it won’t keep up with the CPU and it might even bottleneck it pretty bad. tbh, used GPUs have come down to a really nice price compared to the crypto crisis, and if he’s worried about price, he should def see if AMD GPUs could work for him. They do have some issues with creative tasks tho

[@mabstrei3101]

IMHO: Would have gone for two bigger ram sticks instead of four, (from what I see) your CPU only supports dual channel, so you might lose some performance there, also try to keep the timings as short as possible, for RAM its not only Mhrz its also the timings ;-). Also, please make sure your Apps use the RTX instead of the CPU integrated GPU ;-)

[@tailorpark2468]

please give a Sony Alpha ILCE-7M4 input 4k editing pc configuration

[@tiragugliotta4058]

I'm just here to see that cat..😂😺

[@PhillipRPeck]

Cool video. It's always fun to see PC builds for video editing. I've heard that the memory controllers on the 13th and 14th gen Intel CPUs (and latest gen Ryzen as well) aren't very good and might not always support the DOCP or XMP profiles of the RAM kit if you are running RAM in all four slots. For instance, your RAM is rated at 6000mhz, I'd be curious to know if you're getting that speed since you've populated all 4 slots. I've seen a lot of reviewers suggest only using two RAM sticks if you want fast RAM, but if you want to run 4 sticks, save some money and get slower speed. Also, the GPU can be put to work doing all sorts of GPU-accelerated effects and tasks aside from encoding and decoding--like noise reduction, grain, etc.,--so you could absolutely get some benefits of a better GPU if you can budget for it.

[@AudioJudgement]

I'm curios of this as well. Since he bought 2 kits of 2 dimms, he is basically asking for trouble. My guess it's 4800 Mhz max or computer won't even boot.

[@Lukeb53]

Where did you get 1000W power supply from? That setup could run on 600W no problem. I get future proofing but for an editing PC you could use that 3060 for years and CPU's don't increase power draw much going from generation to generation. A 750W would be good for future proofing and much cheaper.

[@hobby-chan]

The mistake I did was buying a Ryzen 5 instead of a Ryzen 7, where video editing crashes or lags. An expensive mistake. Great video by the way, nice build.

[@Aalu27]

Which gen ryzen 5 you buy

[@RecordCreator2362]

Amazing Video with advice for Gen Z Thanks a Lot Anthony

[@Herbert876]

My PC Freezes when I am exporting 4k Video. What do I need to upgrade? I am video editor however whenever I try exporting an edited video in 4k with any bitrate over 20 it freezes and I have to do a hard reset. PC Specs: Processor AMD Ryzen 9 3900X 12-Core Processor, 3793 Mhz, 12 Core(s), 24 Logical Processor(s) Installed Physical Memory (RAM) 64.0 GB Graphics Card NVIDIA GeForce RTX 3060 SDD Hard Drive Size 930.90 GB What could be causing it to freeze?

[@The_Yeet]

The pairing of an 13th gen i9 and a 3060 disturbs the tech enthusiast in me.

[@DimmyV]

That’s a clean looking build

[@AnthonyGugliotta]

Gotta keep it TIGHT

[@DimmyV]

@@AnthonyGugliotta that’s what she said 😂 you set me up for that.

[@rickertwelten8283]

Did you use the cooling paste?

[@mrbabyhugh]

1:55 a 12700 is fine. dont need K variant.

[@ktiger6406]

I want to see a video on file organizing!

[@newbiegain117]

File management video please.

[@mrbabyhugh]

7:00 ok this is different than what was at 6:00 but still, going for fan aesthetics, turn the fans on the rad as intake. Yea the ugly side LOLOL.

[@DimusTech]

D for Data and V for videos... lol we are like old school twins haha I built mine about the time when the R5 was out so I was ready and it's still good, I might upgrade for a faster memory but honestly all is good for me (and I'm with an AMD) currently my screen has some issues here and there so I will check what you use and who knows... hehe

[@FatGod]

i'm building my pc but idk if there will be a difference on editing between a 14900k or 14900kf. I will get a RTX 4080 as dedicated cpu.

[@DirtyDemos]

If you use Davinci Resolve, you want to avoid any Intel CPU that is the "F" variant because you need the IGPU for QuickSync.

[@TheReptain]

Is amd good for small editing aswell?

[@tietscho]

How do i know which part my camera files are needing? I'm using the Sony A6500

[@Heyyluis]

Hey brother this was super helpful! I have a question, can I use these RAM on my Apple computer?

[@lightcursor1522]

Great video Anthony! I really like being able to watch all your videos while also being able to learn from them. However, in this specific video, I disagree with a few things you said. For example, you said that for 4K video editing, you should stick with a more powerful CPU. While having a powerful CPU is important when it comes to video editing, I think it is extremely important to have an equally powerful GPU, if not a better one. On top of that, everything else in a PC should be powerful enough to support what ever GPU and CPU you have. The PC you built has great stats, but I think you went over the top a bit. First, your CPU is quite powerful and will create a bottleneck with you GPU, for most people, I would suggests a much cheaper and less powerful CPU, especially if they are just getting into video or photo editing. Second, 128gbs of RAM is a LOT of RAM, I only have 16gbs and I can edit 4k and photos just fine. However, I understand that not all people have the same work flow as me and might be working with a larger amount of videos or photos, either at a higher resolution, or the same resolution. Nevevertheless, I appreciate and respect your video and do not mean to be rude. I'm looking forward to future videos you have related to video or photo editing! 😁

[@lightcursor1522]

I have comment on my comment. While I do edit 4K videos with 16gbs of RAM, it's worth pointing out that they aren't long videos. However, if you are editing longer videos, then having more RAM can be extremely helpful. All in all, unless you are doing it professionally, there is no need to get a super expensive system, but, it would never hurt.

[@YountFilm]

The testing I've read about shows that cpu is higher priority for 4k editing than the gpu. However, performance levels off at 16 cores. The gpu comes in more for graphics, rendering, and exporting. It seems counter intuitive, for sure.

[@TheShivam204]

Is MAC studio a better buy or a custom PC , for 4K video editing work primarily (large files) ?

[@Prabhu_njd]

@@TheShivam204 custom pc if you want more value for money. A custom high end pc will be cheaper by atleast double than a high end mac studio with equivalent specs.

[@mwat22]

Not sure who needs to hear this but those older intel Xeon CPUs with 16,18, 20, 24 cores work like a dream in video editing, couple them with something like a 3070, Ti or 3080, you'll never know what stuttering is, the massive core count means that yes they may not beat Morden CPUs on single threaded performance but multi threaded, which he's referring to here is a no contest, because they have massive caches it means they will chew through the video encodes and decodes and timelines like you wouldn't know. Power consumption might shoot but if you consider the ease of life then I think it's a compromise worth making, they regularly appear on Ali express for as little as 10 to 20 dollars and go on from there depending on how new it is and it's core count. Ps the Nvidia GPUs I mentioned can be found for less than 400 USD for the 3080 and 3080 Ti which are equivalent in performance to 4070 and 4070 Ti at a fraction of the price. Heck I even saw a pre built pc from Walmart going for 1200 with an rx 7900GRE and a Ryzen 7700, black Friday offer, I think even if the other parts in there might not suit you that's a very good deal if you don't know how to pick the right parts for your build. As for the GPU or pc parts for cheap, check out jawa. I saw some cool builds and parts.

[@jagged555]

Awesome video

[@3claxz9622]

I dont really think pairing up the i9 with the rtx 3060 is a good idea, I mean yes video editing on premire pro needs more cpu power than gpu but still your kind of limiting the amount of power your getting

[@sonylost22513]

Curious question… what paint color are your walls? 😄

[@User828z78]

gray i think

[@Cinamaticstudiotex]

@Anthony Hi there where do u put the cache or project file is it with the main drive as with the system os apps,drivers or project drive separate?

[@Prabhu_njd]

@@Cinamaticstudiotex separate drive to maximise the bandwith effeciency.

[@Cinamaticstudiotex]

@Prabhu_njd thanks for the info I am building my system for content creation so I think 1 tb will be sufficient for me 1x 1tb nvme so that will be scratch and cache file together

[@Simsel81]

Thanks for your video! I edit my photos in LR and my videos in DaVinci using a self-build Windows PC. I have a Synology NAS at well. I would be very interested in your workflow and data mgmt. From the moment you take the picture/the video to the output. Output for me is mainly my LG OLED Smart TV on which I want to watch the family videos and pictures. This would be very tricky with the High-End H.265 Codecs which you use. Futhermore the rights mgmt of the Synology photos app can be very challenging. I am very impressed with the diligence you approach new topics. Therefore I would be very interested to see your approach. Best Simon

[@edi18912]

why didnt you go the 420 cooler?

[@tecno8335]

No need

[@nofe025]

You could have just used a BeQuiet! Darkrock pro 4 for the CPU cus It has a 250w tdp and ist much cheaper and long lasting than a watercooled solution.

[@KPMLeurope]

great

[@timthesheriff]

How did you figure out that the CPU cooler was causing the stuttering issue you were experiencing?

[@zette4273]

Isnt it better to get an nvidia rtx gpu for nvenc for video editing instead of high end cpu?

[@AnthonyGugliotta]

It really depends on the exact camera you shoot with. Check out the video I linked in the cards.

[@magnetpaints]

That MOBO has a lot of negative recent reviews beware

[@Clints-Vloggingdirector]

@Anthony Guliotta just wondering for the system os and apps how much partition needed for the 2 TB and the rest for project files as in scratch and cache file?

[@vengozid]

How about editing 4K 10bit 4 2 2?

[@TechieFelixLP]

For that you'll probably need a good fast CPU, GPU isn't as much. Unless you're in a time crunch and can't lose 12 minutes to render a 12 minutes 4K. Something like the 1650 Super is good... Or at least to my opinion, I render simplistic video often in 4K although in 8 Bit only. A 12 minutes video took around 13 to 14 minutes to render. However, this is why you'll need a better CPU, my problem with my PC is that the CPU is a budget entry level CPU from 2018.

[@TechieFelixLP]

And the old CPU doesn't help in Timeline scrubbing and everything else other than rendering. I use H.265 rendering which utilize the GPU for rendering.

[@Dami20314]

@@TechieFelixLP M2 Max Mac Studio or risen 9 7950x 3d with 6000mhz 32 Ram With 4070 pro art 12GB VGA ? For video editing And After effects Stuff??

[@TechieFelixLP]

@@Dami20314 I'll probably go for M2, a lot simpler. Especially if you're already so familiar with Apple stuff. But that's just me...

[@AustinWestbro]

1:25 found the mistake 😂

[@RomvnlyPlays]

Yeah you, Vegan.

[@AustinWestbro]

@@RomvnlyPlays Get a life bro

[@itsjayrcuh]

So how much was the total

[@learningphotography4491]

Why did you put the motherboard in before installing everything😅😂

[@LiquidSword52]

Wondering if buying one of those premade "Gaming" PCs would be good for photo/Video.

[@le_nirnoy]

I think you just changed the thumbnail😏 But nevermind, your videos are always good

[@mohammadarif2425]

Have you heard of Vivo X100 pro?

[@SuperTech_04]

Anthony, you don't have to upgrade your GPU, because this is an editing machine not gaming, so the GPU doesn't have any major work. So don't worry about upgrading the GPU.

[@vulgarfvckr6148]

lol try running Adobe Photoshop 2024 on an older GPU go ahead I'll wait

[@itsbiigboy]

What's your video player program?

[@test-547]

For some context. I edit videos for monetized KZbin channels using Davinci Resolve with 32gb RAM and an RTX2080 GPU. His specs are nice. But you can get away with much lower specs

[@viktorb137]

13900K vrom Intel are dead in 1 Jear to manufuktering errors?

[@romali6717]

which ryzon did you have before?

[@memeattackbyFK]

AMD Athlon X2

[@DimmyV]

Did you clean the CPU before pushing the lever down…. Was that the mistake, could have bent pins no?

[@Grady_Mills]

Dude... M2 MAX MacStudio go with that! (unless you REALLY need something that only on windows) Love your videos, Anthony!

[@Dami20314]

@Grady_Mills M2 Max Mac Studio or risen 9 7950x 3d with 6000mhz 32 Ram With 4070 pro art 12GB VGA ? For video editing And After effects Stuff

[@saumyatodarmal4860]

The pc build was probably cheaper than those RF LENSES 😂

[@AnthonyJay]

Hey Anthony! Do you do anything to reduce skin shine in your videos? Curious if there’s a trick 😅