My Best Settings For The F1 Ultra - Plus Massive Giveaway

[@CraigGholson]

You wrote "Don't be a wierner" on the hot dog. The entire video was so helpful. I'm off to your site to get the settings now. That will be so very helpful, even if I don't get a shot at the fume remover. Thank you

[@medic458]

"DON'T BE A WEENIE" OR "DON'T BE A WEENER" Man, that was one of the top 5 most helpful videos i've watched! Thank you so much! and thank you for the settings on your website! You and your channel are AWESOME!

[@LaserEngraving911]

Glad you enjoyed it!

[@tracypeck9138]

DONT BE A WEEN, DONT BE A WEENI, DONT BE A WEENER. Hard to tell based on the video as it appeared to cut out before engraving finished. Ilove your videos! New to engraving and we purchased the F1 Ultra to engrave our logo onto custom made knives. You've been a huge help for me to learn about engraving and my world has been opened to all the things I can engrave now!

[@LaserEngraving911]

That's really great to hear! make sure you check out the black mark setting for knifes and other stainless stuff its magic!

[@petecarelli4217]

Just subscribed and joined your membership page. What an incredible youtube page. The fear for most people is where to start when engraving something. You take all of the guess work out of it. Thank you for everything your do! "DONT BE A WEENIE"

[@Mrchiholi]

"DON'T BE A WEENI" and some hotdog smoke is what I saw from the video. Thank you for sharing your expertise again, I'm very new to the laser world and after watching your videos and seeing what a laser machine can do, I've decided to upgrade from the LaserPecker 4 to the xTool P2 and F1 Ultra, and I'm binge watching your video, lol, thank you so much for all the information you share, you don't know how much you've helped people around the world (I'm from Hong Kong).

[@LaserEngraving911]

Thank You!! Glad I could help, and your support!!

[@webbehr]

Don't be a weenie Thank you for the settings. I was tinkering around with the PMAGs and I didn't think to go out of focus. Much appreciated.

[@LaserEngraving911]

Glad I could help

[@Lucas-Family]

Probably a little late..lol. "DONT BE A WEENEE". Thanks for putting the reference sheet together. Just got my F1 Ultra and the learning curve is more than I thought it would be, but that sheet really helps me understand the dynamics of the laser engraving process. Awesome work and big thanks for sharing.

[@LaserEngraving911]

nice glad you got some value from it!!

[@kevinrich4637]

Thank you for all the great information. A bit of history seeing you brought it up….My great grandfather was one of the founders of Roswell Ga. I am enjoying the F1 Ultra. ‘Don’t be a weenie’. Enjoy your weekend.

[@LaserEngraving911]

Its a good town!

[@pamelaallen9717]

DONT BE A WEENER or WEENEE 😂 Your channel is definetly a gem and I appreciate you for sharing all the intel! It is a lifeline for us newbies! The cutting settings 👏🏻🙌🏻 of course I am joining!

[@LaserEngraving911]

Thanks, glad you're enjoying the content! thx!

[@Randy-r2o]

Great video. Just got my F1 Ultra and can't wait to try all the settings. I saw "DON'T BE a WEENIE" on the hotdog.

[@montereylaska8070]

That was one of the most helpful videos so far, and I've seen A LOT in my F1 Ultra Laser pursuits! Please keep doing things like this, it's so so helpful! Also...DON'T BE A WEENIE!

[@LaserEngraving911]

Awesome, thank you!

[@3dActivitycom]

"Dont be a weenie" very much appreciate the settings and the defocus heights save a incredible amount of time for me.

[@LaserEngraving911]

That makes me happy to hear!

[@ashs_father_tcg]

Don’t be a weeni on the hot dog, loved the quick tips. So many little things we just didn’t think of for some reason! Was thinking it would be fun to do a silver bar, gold bar and platinum soon.

[@LaserEngraving911]

Good call!

[@JamesBushik]

It is hard to read, but I think it says "DONT BE A WEENI," "DONT BE A WEENIE," or "DONT BE A WEENER." Thank you. I have learned a lot from this channel. Thank you!

[@LaserEngraving911]

Welcome thank for playing!!

[@laurenceveness6915]

DONT BE A WEENI, or WEENER, or WEENIE, can't be sure how you ended it! Thanks for pro level advice for a laser newbie in OZ. Keep up the great content.

[@Supgirl1]

Thank you for this amazing video. I’ve had my F1 ultra for only a few weeks and your videos have been so helpful! Don’t be a weenier!

[@LaserEngraving911]

Nailed it!

[@kristencoyle6162]

“Don’t be a weener”. Good stuff!😄

[@LaserEngraving911]

😁

[@1haggler]

“Don’t be a weeni” Still looking at this machine as my secondary unit since I would like a diode but a hybrid would definitely be better. Man the Ultra is versatile I can now use it for hot dogs instead of boiling water 😂

[@LaserEngraving911]

ohhh good idea for tutorial 🤣

[@lisayagi9387]

Late, but I'm glad that I stumbled upon this video! "DONT BE A WEENER" is my guess to what will be lasered on the hotdog.

[@Lomack.792]

Don't be a weenie! Haha! Just joined on your website and printed out your recommended settings list. Thanks so much for this and the giveaway!!!

[@LaserEngraving911]

Welcome aboard!

[@andrewcoady9472]

"DONT BE A WEENI", which may have finished as "DONT BE A WEENIE." Awesome video, have been a subscriber for a bit and love all the information you share! You have helped me tremendously in my laser engraving journey. Heading over to the website now!

[@LaserEngraving911]

thanks!!

[@andrewcoady9472]

@@LaserEngraving911, is there a specific brand of black masking tape that you used in this video, or one you could recommend?

[@dian3145]

Thanks for providing the various settings! I was really struggling to get the darker marks on stainless 🙏. I will need to get on a bigger screen to see how ween…ends 🤣

[@LaserEngraving911]

Nice!! hope they help!

[@philrowe6600]

Thanks for the settings and pro tips. On the Hotdog you engraved "DONT BE A WEENIE"

[@ajordanardaya]

It says "Dont be a weener". Love your videos! Just started on the engraving business 🤗

[@brew0498]

Thanks for the video and all of your content, the hot dog was engraved with "DONT BE A WEENIE"

[@ShickenChit74]

"DON'T BE A WEINER" LOL Great Episode, very informative on the Ultra.

[@ofcleveland]

Awesome video! DONT BE A WEENI was engraved on the hotdog.

[@thomasstocks702]

This is a great video! You engraved "Don't be a Weener"

[@LaserEngraving911]

Good one!

[@TheCraftyPixieLLC-e4j]

Don't be a weener lol I love watching your videos they always help me with laser things and just ideas in general.

[@LaserEngraving911]

I try my best to keep the videos fun and informative! Thanks!

[@Karen-h6f1j]

Always love your videos. Thanks for another good one! Not sure how the engraving ended on that hot dog, but here's my guess. DON'T BE A WEENER or DON'T BE A WEENE or DON'T BE A WEENEE

[@NissanOverland]

Is it possible to engrave in Fiber mode and cut in Diode mode on the Bull Leatherette with the F1 Ultra? I'm having such a hard time cutting Leatherette with my standalone 50w fiber.

[@CorinaStMartinArt]

“DONT BE A WEENI” is what I see but it could have gone on to say “DONT BE A WEENIE” I didn’t see an apostrophe. Thanks for the opportunity!

[@LaserEngraving911]

Awesome your in!

[@CorinaStMartinArt]

@@LaserEngraving911 Thanks!

[@MrHansy2]

Great video as usual. You engraved "DON'T BE A WEENIE"

[@cjadams7434]

so as far as the fume extractor goes, is there a reason you’re not keeping it or is there something you’re using that you find is better?

[@LaserEngraving911]

good question! I actually use Industrial grade fume extractors that cost about 4k and the other one cost 7k, but I really like this new one from xTool for things like mobile events, and taking it on the road. So after I gave it away, I actual got another one :) go figure!

[@cjadams7434]

@@LaserEngraving911 I was gonna say.. its amazing!… my rooms air quality monitor read better air after using the laser than before.. i assume it was spitting out better air than ambient LOL

[@elopez1369]

Don’t be a weenie! I am currently looking at getting the F1 but an F1 ultra would be awesome but I can’t afford it yet. Great video and thank you for the settings

[@LaserEngraving911]

Right on!

[@Luke-e6z]

Great video great channel you have really helped me to find some good choices for leaser engraving material on your other videos THANKS.

[@djs2220]

lol great video! Loved it! Some great content! "DONT BE A WEENIE" or DONT BE A WEENER" Could only see that second E being engraved!! Thanks for the content!

[@LaserEngraving911]

Thanks for that!

[@spetsdod]

The engraving says "DONT BE A WEENI" but then switches before the last letter is finished. Thanks for the chance! I've been a subscriber for a while, so I tossed a like here instead!

[@FrancoGio]

Good video and pretty sure the you engraved DONT BE A WEENIE on the dog 😀

[@TonyMueller]

Don't be a weener... send me the fume extractor. Great video.

[@TonyMueller]

maybe it was going to be weenie? It cuts away before finishing

[@LaserEngraving911]

all good! Your in the contest 😁

[@CrozetMom]

DONT BE A WEENIE YOURE AMAZING! Such a helpful piece of content,man!

[@LaserEngraving911]

Thanks!!

[@craftingwithjean5599]

Found your channel today. Really liked the tests you did and the settings. Going to your website now. Subscribed today. DON’T BE A WEENER or DON’T BE A WEENIE. THANK YOU for the opportunity to win, more importantly to learn from you.

[@LaserEngraving911]

Awesome, thank you!

[@ALXSHARPEN]

Always great info the hot dog was DONT BE A WEENIE"

[@heidiallen1542]

Absolutely love your content! My husband and I are huge fans of your work!

[@LaserEngraving911]

Awesome! Thank you!

[@eternalgamer786]

Thank you so much for your hard work this was an awesome video. Would love it if you had pro settings for the F1 as well.

[@LaserEngraving911]

Good Idea!! Thanks!

[@wisdomshare]

"DON'T BE A WEEN..." I wish your video would have been available a few months ago as I bought bricks from HomeDepot and no workie-workie! Just last night I cut some foam (I was pretty close to your settings). BTW, any link for your foam? I found mine on Amazon and use it to hold some stuff in-place/present multiple products in the same 6" x 9" (mailer) box (always looking for other sources). Just downloaded your settings sheets from your site for some leatherette cutting today. Great channel and resources. Thanks for sharing your talents and giving back to the community!

[@LaserEngraving911]

Glad I was able to shed some light on the brick issue! I get my eva from amazon as well here is the stuff I like amzn.to/3YbpA8t

[@ZoraRossouw]

Don't be a Weener (or) Don't be a weenie! I signed up for an account and thank you so much for the settings to get us going. Great channel. Love your videos and keep coming back for more.

[@kitcritical2168]

"Don't Be a Weenie" I think? It cut off so I don't know for sure lol. Thanks for the video! I have an F1 and was debating eventually getting an F1 Ultra when I can afford it. Would you ever consider doing a video like this for the F1 as well? Or any other laser models? The settings are the hardest part to figure out, and videos like this are very helpful!

[@LaserEngraving911]

Fair enough!

[@MoyaPsy]

Hey Michael: don’t be a weenie! Great video as usual. Love the value you bring to the community.

[@LaserEngraving911]

I appreciate that!

[@coreybrown8404]

Awesome video as always, looking at the F1 series from X-Tool, looking pretty cool! Looking forward to the laser horror story series! Super fun idea! DONT BE A WEENER

[@twistedbarbell3950]

Thanks for the vid and settings! DON'T BE A WEENER, although the video cut to another scene prior to seeing the complete engraving.

[@timothygrote5609]

Don't be a weenie. That hot dog demonstration is a good reminder not to stick your hands under the laser head lol.

[@LaserEngraving911]

😂😂😂

[@janetclark840]

Don’t be a weenie. I enjoy your informative and fun videos.

[@LaserEngraving911]

😊 thank you

[@joshcobb4100]

Love your videos!! Thanks for all the tips!!

[@LaserEngraving911]

@@joshcobb4100 Thank You!!

[@zyalan1]

Don't be a weener is on the hotdog great video

[@LaserEngraving911]

nice!

[@meJaneMakes]

DONT BE A WEENI is what I saw on A LOT of replays 😅 could be DONT BE A WEENIER OR WEENIE. 😁 I love your vids, I'm really close to buying a laser or two looking hard at xTools Ultra F1.

[@LaserEngraving911]

Awesome thanks for playing good enough!

[@stevmask1]

Engaving wasn't complete - but "DONT BE A WEENI" is what I saw. Thanks!

[@Revvek]

Thanks for the free settings! You engraved DONT BE A WEENIE On the hotdog

[@LaserEngraving911]

Right on!

[@Revvek]

@@LaserEngraving911 do you have suggestions for engraving greyscale images on cork on the Ultra? It seems cork is very sensitive…

[@paontw]

hi, thanks for all your videos. You engraved "DON'T BE A WEENIE". Btw do you have the possibility to washing the filtres or do you need to buy a new one ? thanks

[@foralways]

Awesome channel, awesome post … ‘don’t be a weener”! Thank you dude

[@LaserEngraving911]

Rock on!

[@CGTaper]

DON'T BE A WEINER I was looking for something better than what I have. Love this channel ❤

[@bernardociglar1338]

NIce one "Dont be a weenie" tnx for settings :D

[@redkellbell6169]

"DON'T BE A WEENIE" Ive seen people also engrave on peanut butter cups and pumpkin pies for upcoming halloween. Fun food times... Have a request from someone to mark pure silver dice on my f1. Should be interesting.

[@dheinis120]

Thank you - I tried to print out your setting advisor sheet - in vain, your .pdf e.g. the screenshots? of the settings are not sharp and cannot be read at my end. Can you please look into this? "DON'T BE A WEENIE"

[@LaserEngraving911]

If I have time ill try and format a printable copy. right now it just for viewing on computer. Thanks for playing!

[@dheinis120]

@@LaserEngraving911 Thank you

[@geniecrook1891]

Don’t be a weenie About to receive my F1 Ultra & trying to absorb all this information! Thank you for your videos!

[@TheRealDraigen77]

Didn't complete and laser dot is in the way, when it switched, it said what appears to be "DONT BE A WEENI", assume it was "DONT BE A WEENIE" when finished

[@LaserEngraving911]

good enough! Thanks for playing!

[@sherry5613]

Don't be a weenie, Thank you for all the settings and the information on the new air purifier.

[@LaserEngraving911]

Glad to help

[@minx143]

Don't be a weeni, clip ended before the e if you added that 😅 love your stuff.

[@LaserEngraving911]

thanks!!

[@ToniaLade]

Thanks for your videos " Don't be a weenie"! You have helped us so much!

[@LaserEngraving911]

You are so welcome!

[@GloryAboveDesign]

Thank you for the great video and settings

[@TheGuardsShop]

1.Subscribed - check. 2. Don't be a weenie or Don't be a weeni - it cut out before I could see anymore. 3. Signed up for an account. Got to be honest though, I was just here for the hot-dog! (on a more serious note, great video, useful settings sheet which will come in handy ........................ but what did the Hot Dog taste like? lol) Stay safe and best wishes to your family.

[@LaserEngraving911]

Thanks for the sub!... 🤣 Im not eating that thing!

[@craig69ify]

Don't be a wiener ... awesome! Thanks for the laugh brotherman!

[@LaserEngraving911]

😁

[@orlcsandiego]

DON'T BE A WEENIE or "Don't Be a Weeni" The video switched scenes before transitioning to the "e". Great video and resources. Thank you.

[@pejdpink]

DONT BE A WEENER...I'm really loving your video and I'm over to your website to sign up too!! Jan from Ontario Canada

[@stevedowning3656]

Great video and looks like a great machine. Don't be a weener.

[@LaserEngraving911]

Thanks for playing! 😁

[@JasonIrons]

Don't be a Weeni.Thanks for posting all these settings

[@LaserEngraving911]

No worries

[@terrelfitch5838]

DONT BE A WEEN is all I could see in the video. Hey Michael - my wife and I cannot thank you enough! We bought the F1 Ultra a few months ago and have struggled mostly with all of the settings. She and my daughter own a Permanent Jewelry business and they bought this machine to cut charms, names and connectors. We still have not figured that out using various metals. Now we want to expand that business as we learn more of what is possible with the F1. We became members on the site and we will be also joining the Super Fan club as well hoping to learn more! The settings sheet is amazing and thank you for that cause that really is the secret sauce (so far in our endeavor) that has been stalling us. Anyway, thank you Michael and you should be seeing more of my wife and I in the future as active members!

[@LaserEngraving911]

That is a great success story! and I really like that your implanting that laser into your existing business! Glad to hear that those starter settings were such a help! makes me want to make more!! if you ever want to do a 1HR private consultation let me know you can email me michael@laserengraving911 we can talk more about laser technique and laser cutting of metal and fiber lasers.

[@tinaszczesniak7874]

I saw "DON'T BE A WEENI" - and I assume there was going to be an "E" after that. Thanks! :)

[@joshspeer2273]

Don’t be a weeni. Great video! Thanks for the settings!

[@LaserEngraving911]

no problem!

[@lincoln8279]

"DONT BE A WEENI" is what was shown or "DONT BE A WEENIE" as a guess to what it was after finished

[@theprepper3857]

Haha, "DONT BE A WEENI"... I just got the F1 Ultra about a month ago and love your information!!!

[@LaserEngraving911]

Awesome! Thank you!

[@mixalisprot9977]

Don’t be a weener Thank for the settings!!

[@LaserEngraving911]

Welcome!!

[@megank9623]

Very helpful video! "DON'T BE A WEENIE" 😂

[@LaserEngraving911]

Glad you like it! 😂

[@drweip2892]

DON’T BE A WEEN…. Btw, THANKS SO MUCH FOR YOUR AMAZING CONTENT! You have made the laser engraving learning curve SO MUCH EASIER. Also, thanks for mentioning your website. Never even thought of that, and I appreciate the heads up.

[@LaserEngraving911]

You go it thanks for sign up!

[@cliffgeter1105]

Don't be a Weenie...I have been using my F1 Ultra for a few months...I love it...Great Content...

[@LaserEngraving911]

thx!

[@jonnylarsson2081]

You engraved ”DONT BE A WEENIE”

[@stevenlondon7210]

Dont Be A Weener ! Can you make more settings documents? and format for 8x11 printing? Great videos!

[@MrDbq2005cc]

Don’t’ Be A Weenie! I’m probably too late for the give away, but no worries. Looking forward to receiving my F1 Ultra Bundle this Friday! 😊

[@guindonmike]

Hard to say what the last word really was, there was some indications of Weenie or Weener....watched it over and over like 5 times, so one of the two I guess...cheers!

[@kristopherpomilla9469]

Don’t be a weenie! This would be so helpful!!! Love the content.

[@CHARLOTTEDUFFEY]

DON'T BE A WENNIE Great video I downloaded my 911 Cheat Sheet🤗 Thank you!!

[@LaserEngraving911]

Great thanks!

[@thoth80]

Great content again! "DON'T BE A WEENI"

[@sandyb4021]

Don’t be a weenie. Love your videos. I haven’t purchased a machine yet cause I can’t decide which one. Leaning towards F1Ultra.

[@LaserEngraving911]

good choice!

[@jayeckhart1561]

It cut out too soon, but it looked like you were going for "Don't be a weenie.

[@danaford889]

Great vid - "Don't be a ween..."

[@Akwin74]

Nice video. I watched the video carefully. I think the following inscription is being engraved "DON'T BE A WEENIE"

[@sstan03]

DON'T BE A WEENIE but the last part after the I got cut off in the video.

[@imin2cad]

DONT BE A WEENIE Great video, as always!

[@LaserEngraving911]

Thanks!

[@bearfireforge]

Looking at getting one of these very soon, thanks for the settings info! Oh and "Don't Be a Weenie!"

[@LaserEngraving911]

Enjoy!

[@bresnik]

It cut out right before it was finished but it looked like you engraved Don't be a weener or weenie. Weenie is the better guess.

[@johnnyking3894]

Don't be a weener nice video wish I could afford a f1