My Cousin Told Me He Could Weld: I Trusted Him With My Project Truck

[@rollingops]

Tip that Trevor is using: amzn.to/3PSsQC4

[@andrewcaron5285]

Please keep posted on the truck. Going to be setting one up like it.

[@kingtut5923]

Wow what a nice truck and double rams.

[@scottingoldsby5605]

Can't wait to see it painted and stickered... There's just something about the old school cars and trucks that have the chrome key switch in the dash! You guys are doing an awesome job BTW and your cousin is a very good welder!

[@JackofHaulTrades]

Brother you channel is booming 💥 100k by the end of 2024!💪💪

[@rollingops]

Appreciate it man! That's the goal!

[@JackofHaulTrades]

@@rollingops you will make it happen easily!

[@SPUPRR]

I would suggest going to a truck tire shop and ask about 22.5 Dayton wheels. They are used on school busses. Direct bolt on in place of the original 20" wheels. Uses the same Wedges and spacers but uses modern tubeless tires and single piece wheels.

[@rollingops]

Nice! I've been looking for hub conversions. But that's probably a good alternative either way

[@SPUPRR]

​@rollingops if you go that route another trick is to weld 2 tabs beside the valve stem. That way when the wheel slips they hit the spoke and stop instead of shearing the valve stem. Last time I got some 22.5 wheels they were cheap. Like 50-60 in like new condition

[@BentIronBins]

Sweet good back up. I would weld a 2x6 tube on underside of rails about a foot back as a bumper you can put lights in it as well. Good job it’s taking shape. It has power down i presume and not gravity down.

[@rollingops]

It's actually has gravity down, so I'm working on ways to improve that as well!

[@BentIronBins]

@@rollingops oh ok yes not sure how to make power down if it’s a PTO driven pump I’m sure someone knows out there.

[@jakekerr1189]

Don’t forget the hold downs for the back end of the dumpster. Beside just the lock in the front.

[@BeefRocknmore]

LOVE the truck. It's cool what you are doing with it. I haven't been around nice trucks like that since I was your age... But if those are split-rims, be VERY careful. Those old rims have killed and maimed a lot of people.

[@rollingops]

Glad you like it! I'm pumped to breathe new life into it

[@jjremovalservices7418]

If it isn't used on a daily, the whole advertisement aspect for your brand awareness can be done during town parades and such 👌 I sure would still love to see it haul some good loads though.

[@rollingops]

Yep! May even use it for grocery runs!

[@rollingops]

We will make sure to put some work in with it too!

[@scottingoldsby5605]

I actually started with the same venturi vacuum system but had lots of problems with clogs. I have since built a pressure pot system to force the media through the tube and it is much easier to regulate the amount added to water stream.

[@kylehamm7287]

One of my favorite episodes and the dustless sandblasting at the beginning was fantastic. I need to see if something like that is offered near my area. Can’t wait to see the big boy completed

[@rollingops]

Glad you enjoyed it!

[@neeleydev2596]

Lol u had to beat it off 😂

[@rollingops]

Lol, caught myself

[@neeleydev2596]

@@rollingops lol ik u did

[@rirebel6029]

Still cant believe thats a gas job !!! Its a unique bird for sure

[@dougdodson7498]

Every welder is as good as his grinder

[@rollingops]

Absolutely

[@j.cv.bmerwe6304]

Ad some roller in the framework so the container can roll on and of and it wel protect the cable at the start of lifting

[@rollingops]

Yea, I think we will have to!

[@Jonathan-ql1wq]

yes sirrrrr rolling ops working on the old truck before gta 6

[@rollingops]

Wouldn't that be a cool feature!

[@JoeWhoJoeMama2024]

What's the curb weight of the trailer and one of the 4 foot bins?

[@j.cv.bmerwe6304]

Do you target bilders to rent containers? Here its the big bus Private Residence tend to get alot of problems

[@rollingops]

@j.cv.bmerwe6304 not as much as you might think. Large contractors always want 30 yarders it seems. And are big companies around here only provide 25 yard dumpsters and up. So we typically fill a much needed niche with residential and small commercial contractors

[@scottingoldsby5605]

Clayton have you finished the metal work on the truck as far as the locks and the tail system? If not i am going to email you some pics of my build which may make life easier for you..

[@rollingops]

Please send me them! Looking for ideas because I'll have 2 lock points

[@scottingoldsby5605]

@@rollingops I sent you some pics via email of my front lock system and also the yellow pads on trailer frame are rail slides that I chose over a roller in frame rail. I will send you some of the rear locks as well..

[@chavojr89]

Am curious to see that too if at all possible!

[@scottingoldsby5605]

You looking for lock down ideas​@chavojr89

[@anonymousguy4860]

A grinder and paint, make me the welder I ain’t!

[@rollingops]

Exactly!

[@hiimbob8858]

Merch!!! Merch!!! Merch!!!

[@ciaranxr8]

Not to be used daily .....i give you about half an hour with it not having to drag a trailer around and its going to be the main character of the story.. just think of your trailer as the promotional idea

[@rollingops]

You may be right!

[@rollingops]

It only has 15k miles! Lol

[@ciaranxr8]

@@rollingops Hey if its not used its not getting the justice it deserves as a work horse

[@andrewcaron5285]

Also what is the over hang length

[@rollingops]

4 ft.

[@andrewcaron5285]

How is the coming along

[@rollingops]

@@andrewcaron5285 getting there!

[@nickmorgan8434]

My prayers are with you..i know you have to be stressed about your shop and the damage Dollar Gen has done

[@porchard3628]

10 days bro! Come on.........

[@rollingops]

Sorry, mate! I'm doing my best. It's a tough time. Busy seasson hit hard, buying a new house for me and the misses, and the new apartment simultaneously has come with a lot of crap. Not to mention linking up stuff for the storage unit build. Nothing necessarily fun either! Video soon though!

[@porchard3628]

@@rollingops copy that, stay safe buddy , good luck

[@rollingops]

@porchard3628 thanks man! Don't want to saturate you guys with boring filler!

[@andrewcaron5285]

What is the name of the system he used to do the wet blasting.

[@rollingops]

I belive its just an attachment. But you need to have a power washing pushing at least 3500 psi

[@markchristensen5206]

Remember to always check to make sure, the hood ,is latched, Ford is known for, the hood, coming unlatched ,while driving down the road, been there done that, no fun.

[@rollingops]

I've heard that from a few guys. I'm gunna need to fasten a little something to prevent that

[@sethhardin4351]

We’re you at the Morgan Wallen concert in Indy last week?

[@rollingops]

Nopeeee

[@scottingoldsby5605]

Wet blasting is the way to go If Trevor wants to save a bunch of $$ I have a hookup to buy the coal slag (the black stuff) in 2000lb bags for probably what he is paying for about 500lbs in bags....

[@BanditVanWoert]

IMO its too steep.... You may wanna put some weights on the front of the truck. Your truck's wheel base is shorter and taller then a normal dumpster truck. You get a heavier Dumpster your popping a wheelie.

[@rollingops]

Hmm! I'll have to look into that. Because the dump angle isn't as steep as my trailer. But that may operat differently on the rear!

[@johnwilliams8371]

I swear you look like zna productions Eli is his name yall are so similar

[@rollingops]

I'll have to check em out I guess!

[@cwsalmans]

Maybe it’s because I own my own welding business that this whole video made me cringe

[@porchard3628]

Where is new video!???

[@rollingops]

Man, I need to put one out! To say things are crazy is an understatement. Between the move into a new house, purchase of a new rental building and of course just running the business, I'm just keeping a float! Hopefully, an update soon!

[@porchard3628]

@@rollingops u dashit buddy! Good job