MY CUSTOM BUILT MTB DRIFT TRICYCLE IS RIDICULOUS!

[@ArnoldQMudskipper]

Lewy attempting to switch on the -blender- fan through the blades was Incredible dedication to epicness

[@mauricebruns1028]

Safely first; “What you doing there; it will chop your arm off”..

[@carnsoaks1]

Imagine the intro clip they'd have if he did it.

[@DizzyDsvids2Please]

His brother saved him 😂

[@Jean-jk4zv]

U just have two tries this way

[@louloup4607]

Just put 72v3kw on this dam trick .. common sense..!

[@sroozertsch.5711]

03:51 I knew that fun was beeing had. - Sam Pilgrim, 2023 …and with such lyrical simplicity he describes what we all have felt, indeed.

[@hornzeerides72]

The Canyon Stitch 1080 drift machine looks like some epic fun.... if you could get some peddles welded to the front wheel and shrink the back wheels you would have the ultimate Big Wheel....just a suggestion.... cheers 🇨🇦

[@SnootchieBootchies27]

Pedals

[@A42sre]

Love how you censored the maxxis logo😂

[@nukacookie4755]

What kind of paint can be used for stealth mode ?

[@mikemotorsport]

It took me ages to see what that said haha. Pixilated stuff draws my attention way too much.

[@dominikkal1994]

Some shots later he didn't even try to censor the maxxis logo. It's clearly readable😂

[@atirat7388]

Why is he censoring it?

[@thebrowns5337]

​@@atirat7388guess it's not owned by Canyon and as a big sponsor they might get salty about it.

[@nukacookie4755]

This is by far the most epic mtb channel 🙂

[@SamPilgrim]

Thanks dude!!

[@destickert1307]

Sam is THE reason for all the other mtb channels! the Messiah!!!

[@jsppjspp6559]

This is the best bike channel, not just MTB!🤩

[@starkillerrock]

@@SamPilgrim hey Sam Hope this is you someone tried to scam me using your name check my comment it is a bit further up they just made their account today just letting you know don’t worry mate obviously don’t blame you I know there’s lots of scammers going on at the moment by the way great video those drift trikes are really fun

[@matthewbryan7465]

@@starkillerrock they tried to do it to me aswell

[@benm8605]

Yes! Drift trike to the max, love it-- can't wait for the next version! Your idea of putting plastic blocks under the tires reminded me of something my bmx buddy used to do-- call it the Dewey slide-- full speed skid hitting the back brake right as you approach a small square of cardboard laying on the ground, sending you into a super long skid if you find the right spot :) Was always a classic move when we were riding behind shopping centers with good sturdy cardboard for us to use

[@thebrowns5337]

We used to do the same but with crushed drinks cans.

[@sixty2612]

I loooove doing this. Sweet skids without thrashing your tires

[@SpAm-AcCoUnT]

Delrin! Great high density plastic that people use in industry for wear surfaces. If you want a single slippy surface, you could just mount a big lump of the stuff to a rim in one spot. To get it around would be harder and I’d advise contracting a fab shop to make that for you. They could just mount a bunch of little blocks then turn them down into one round. It’d cost a fortune, but they’d last a while and work a treat, I think. Else you can maybe do what my dad and I did for my big wheel as a kid. Big round of PVC tubing of the right inner diameter, cut to desired width plus an inch or so either side. Then, cut 2 more rings, take a notch out of each, and kinda compress them around the tyre like a snap ring. Glue in place with PVC cement, and boom. Retained wither side, nice and round, and mine lasted years on a Green Machine getting whaled on.

[@JordyValentine]

Kitchen chopping boards, usually PTFE. Same result and cheaper. Could make sleds/ski's for the rear

[@robotbroken]

There's something about the Drift Trike videos that make me smile so hard that my face hurts afterwards. Thank you Lewi and Sam for sharing your talents with the world! I'm not sure how we'll ever repay you.

[@distanceresearch]

Dude, you’re channel is so uplifting! I was in the high end mountain/freeride/downhill and BMX freestyle industry for many years. You’ve relit that fire in me, I am going to be building a new bike. Keep up the excellent work! I have to say that I am always happier after watching your videos! The Penny Farthing was insane!

[@jacksonfromm8365]

Someone get this man a Grammy! No ones as creative as MR. Pilgrim! I wana see same garage, he probably has some of the coolest and strangest gadgets ever

[@SamPilgrim]

Just a load of mess haha!

[@augsu]

@@SamPilgrim a mess to you, a fantastic smorgasbord of cool stuff and memories for us!

[@chrismade123]

Sam for Mr Q in next Bond.

[@thebeatclinic9000]

I love how the propeller just has a bit of netting for protection. They must have thought, "that'll do". 🤔

[@crtgamer2355]

Only Sam can turn the grayest. most overcast, depressing, dull and boring day and turn it into SUNSHINE!! WOOOOO!!

[@interesting-w0rld]

As always the best mtb content on Youtobe, from Sam Pilgrim, it's very fun to watch a new video in the)

[@Christian_Call]

"OH my proximities" LOL!! I suspect all these shenanigans are what keeps you in beast mode 24-7!

[@BenjySparky]

Sam and Lewi y'all rock! Today was EPIC! Peace! To the SKY!

[@colinbird6436]

If you are after plastic/nylon tyres for the trike to use for drifting, 'perhaps' use the 'blue' plastic/nylon water pipe that they use for the water main feed to domestic supplies. You can 'probably' cut the pipe to size and then using an internal coupler with a resin based adhesive to join the pipe ends together. I'm pretty sure this could work mate, you might want to seek further information on 'how to glue the pipe using an internal insert (length of insert needs to be about 25mm. Using the 'blue plastic/nylon watermain feed pipe, you should be able to create a tyre that actually fits within the rim of the wheel (more secure).

[@Punkinbushcraft]

That wheelie to stop 😜🤘🏻 and Sam's face just says it all 😆 pure excitement and dreams rolled into one 😎🤘🏻

[@mattmorris2867]

Awesome. Epic. Rad.

[@mark_nemecek]

8:29 - "don't pull it from there, you'll chop your arm off" 🤣

[@GeorgeJ0935]

the best chanel for comedy and mtb 😂

[@ToxicKaneki]

i love sams channel because there is no clickbait and when he says todays gonna be epic you know its gonna be

[@mke723]

Love how much Sam enjoys his Adult big wheel..lol Seems like you could use ptfe dowels or a single dowel, heated and formed to go around the rim, secured from the side with pocket screws like cabinet makers use.

[@sageambrosek5206]

Pvc bends easy too and flies well. Perhaps a long strip of Pvc hot bent around the rim. Wrap it up until the rim bed is filled them glue a wider strip to it and wrap it around a few times for a thick layer

[@evanbohlander]

New video idea: take a pipe, get in it, and shred dirt jumps inside of it

[@jimmylopez2015]

Is that Dusty in the back at 13:28 ? 🤣🤣 same color outfit as Sam. Thought it was one of his personas 🤣🤟🏼

[@tubularap]

@SamPilgrim. Try wrapping the wheels with melted plastic. Collect a lot of plastic bottles and other household trash. Sort it by plastic type (many YT videos available). Melt it in an oven and kneed it into long strips that you drape over the wheels while still hot, have the various strips overlapping. Include the top-end of the spokes for grip.

[@IdoBerg]

damn that was EPIC! but i have an Idea for you sam. how about you take this thing to a downhill track? :o with the booster :D

[@BennytheJohnson1]

Hi Sam, You can try finding a CNC specialist or someone with a big enough 3D printer to fit to your specifications. An alternative is to create a wheel mold for an acrylic pour. The second option might be better BECUZ you can DIY.

[@jameswray6015]

I think you need to drift trike a tandem bike for the length it will give you. Triple clamps and a big wheel up front. And find some long twisty downhill roads. Might just be the best day ever. Thanks for the entertainment these drift vids and the cheap bikes are my favorites.

[@brandonchan4992]

I love the censoring on the Maxxis tyre. Hopefully Goodyear won't be too upset 🤣

[@markpeterson8978]

Well Good Sam & Lewy! I love your approach to Life Mates! Cheers! - M

[@wecirclethesky]

Nice one Sam! I cant wait to see the future! Not sure about another kind of plastic pipe big enough for those wheels, but you could try thicker cuts of the corrugated pipe, they might be less wobbly as they get thicker. Also, you could screw little blocks of wood into the pipe on either side of the tires in multiple places around them to lock the wheels into place.

[@charlesgraham9954]

i custom built me a three wheel bike as well. front suspension, rear suspension, live axle with a 420cc Predator engine from Harber Freight... lol. yall i ride that thing 5 miles one way to the Dollar General on dirt... lmfaoo.! whats real funny, i was born and raised in L.A. California, moved to Missouri and turn country AF..! lol

[@davea8346]

Thank you, Sam, for doing and recording everything I would want to do when I was 12. Total epicness!

[@okiootski187]

this is the best thing ive ever seen, how is Sam so casual about it. amaze!!

[@eimantasliutikas6633]

no one can ever beat Sam content creation skill😂

[@barnobeats5724]

A colab with Colin Furze for the drift bike would be awesome

[@Coerced]

0:10 Ooooofff, I thought that was a Maxxis front tyre there for a second, but then I saw the blocky illusion on there and I realised it really was a Goodyear tyre after all. Silly me...

[@TheronLewis]

I'd love to see your collaborate with colinfurze. He's built a number of drift trikes along with a ton of other insane things. He's pretty much a mad scientist/wizard when it comes to building fun ridiculously questionable and borderline dangerous things.

[@ArmstA79]

I was just about to mention exactly the same. This is such a Colin Furze machine!

[@randomcamerajunk6977]

Slope style on the bike of springs

[@TheronLewis]

That would be epic! So death!

[@mujtabamirza2784]

This man just achieved the everyone’s childhood dream drift on cycle

[@bmfarslow]

That was Epic , wish I could give that more thumbs up.

[@ashpunting]

Sam is like the mad Scientist I love it 😁🤣😂

[@ashleytombs]

Today is going be sketchy as I don’t know if Sam has a middle name but sam Frankenstein pilgrim has a nice sound to it with these drift bike builds and big respect to Colchester cycles for helping Sam out always support your local bike shop

[@joechiappetta9483]

I've never seen a man with that uneven of hoodie strings 😎 iconic

[@paultomlinson528]

Seriously that looks the most epic fun ever!!!!

[@toripowers7295]

Japanese drifters sometimes use large pvc pipe! It might be a bit more durable but they also have a drip system so the wheels don’t get to hot and crack..

[@loren7osartori]

ERES TOTALMENTE EL MEJOR SAM, TU HACES LAS COSAS ABURRIDAS A QUE SEAN GENIALES, TU ERES UN ESTUPENDO CRACK...

[@lahillsm3]

You sure could use a 2" roll of grip tape for the inner diameter of the pipe. Same thing works with 10" PVC and go kart tires. The keys is grip, ironically!

[@CorrectingIgnorance]

The censored Maxxis symbol on the front tire is too good

[@ReturnOfTheGhoulScouts]

"It might be a bit too steep and I don't have the front brake BUT I'm gonna send it anyway.." 😂🤣😂🤣 Wish I could 'like' this video more than once! Such a funny idea, imagine what the people looking out of their windows on that hill must have thought! And the CCTV operators in that car park! 😂 Long live the drift-trike! Would there be any way to make some sort of electric drift trike using the Sur-Ron or any other e-bike? And don't forget that parachute thing you've got! 😉👍

[@djsonfire0001]

This was truly epic!!!

[@vangilanteryan713]

Bruh, when he broke out the 60cc 2 stroke fan knew shit was the best. No, thats a whole new sport! Gotta add a better frame to fall against so dont get arm/head chopped off when roll Lolol. But that was truly epic. Could prob 3d print like plastic wrap around tires.

[@gib_life]

If you get a router and the right bit you could carve a half circle grove in the piping for the tire to sit in and it would probably stay on straight. It would only take a few seconds per each plastic tire sliver and you could probably cut them thinner since the tire is now a skinny road tire.

[@garethjackson2760]

Dill holes in the groove of the plastic on the outside through the wheel and fasten with nuts and bolts about 10 per wheel should do it 👍

[@troyrogers1236]

that fan pack is hilarious ... like a long lost devinci invention..i can just imagine someones like theres a guy in the parking lot with a gas powered fan backpack and a tricycle doing donuts and the other person would be like- WHAT?

[@petrtancinec8627]

Cool and fun like always :) ... Nice Maxxis tire :D

[@christofs-a1834]

Brings back mad memories. We used to do this back in the day, but used to raid the bin at the lbs for old bmx wheels and put the on minutes the tyre and shred to they felt apart!! Happy days 🤣

[@leebatt7964]

This is the kind of stuff we lived for when I worked at a bike shop, customers coming in with crazy ass ideas and helping make it happen.

[@wedipcarwrapping8496]

Add snowboards/skis with holes in for the rear wheels to poke through that are adjustable up and down. So you have the option to roll or slide with like a handbrake mechanism.

[@jiggilowjow]

your a true pioneer mate!!! never stop, never slow down.

[@krisjones74]

Best video in a few weeks. Well done, Sam and Louie! edit: typo

[@MrToppox]

😈😈😈 ohh my god your an innovator. ... the fan and bike is ridiculous 😈😈😈

[@weshodges86]

We had a green machine trike as kids that we skidded through the plastic wheels really quickly but my dad found this super thick pvc pipe that fit perfectly over them and glued it to the original wheels the wall thickness was like 20mm so super durable but so skiddy it was barely rideable as kids. Feel like as an adult with a fan it would be perfect!👌🏼

[@itsyeeoledskoolfurry3208]

It's Wangan Midnight all over again!😆😁 Rolled up in a new experimental material; "Insanium".

[@itsyeeoledskoolfurry3208]

@Sir_SamPilgrimTV Yup. Thanks, though NO thank you. Please locate your self another "winner".

[@Borrie131]

Every day is probably epic!

[@raoul2350]

Simply the best!!

[@masacziusets9593]

kox filmik samie pielgrzymie 😍😍😍😍😍

[@dr07828]

"it already feels like it's going to be the best day of my life." Best ever!

[@dbfhddhdhd-xy1yj]

imagine checkin ur tesla camera and seein sam pilgrim driftin past ur car

[@riderdor2796]

Super vidéo 👌 🔥 🔥

[@thedford]

that slow manual is hilarious. im not sure if its an optical illusion but those rear wheels look like they are about to snap.

[@daledubose3032]

That slow mo wheelie was the best thing ever

[@philipB31]

Genius (borderline insanity) levels of epic-ness.

[@Tekloiddnb]

This should be a sport for sure!

[@ag4058]

So I have a knee way of doing this, put the back 2 tires on plastic tea trays, pull the break so they don’t move, and there you go, drift plates Used to do this in my ford escort with maccy D trays

[@jameswray6015]

What about mains water pipe the blue plastic stuff. Run it without a tyre, bolt it to the rim in a few different spots with the bolts sunk through the outer part.

[@nathanb9152]

Do the PVC pipe again except this time drill holes in each side of each peice so u can string heavy gage metal wire to wrap snuggly around the rim. That way they don't go shooting off everywhere.

[@jokermtb]

That tube's corrugations are hollow on the inside! Just reveal them from the interior of the tube and you'll have a lot of drift tire casings. if you got a soldering iron, you can make (via melting) two 360 degree cuts on the inside of the plastic tube's interior, removing the flat tube interior face, revealing the hollow void of the corrugations in that tube (they're hollow!) Then merely put your wheel/tire back inside and inflate - the tire will occupy the void of the corrugated section and be held firmly in place by the sides of the corrugation - you will only be able to use one corrugation section (or three - just use the middle void for your tire). Might have to slap on a fatter tire to fill the corrugation void, but that's the idea - and you get to use the rest of your expensive tube.

[@CarnalCarnival]

3:59 haha that's nuts, you should stick a gyro headset on and you'd be able to do infinite bar-spin wheelies. Also, any chance of you and Matt Jones meeting up for a video and go and shred the new indoor skatepark he's just built!

[@Mile-long-list]

Rocket thrusters are the logical next step. You can get them !!!!!

[@DONEWR1TE]

1:05 MAXXIS everyone loves maxxis tires for real

[@akihirozheng9273]

The sound track of Tokyo drift fits this crazy shinanigan...😁😁😁

[@smartnothard2400]

The look at 3:01 is 🔥 😂 👌

[@Newbieriderr]

Im laughing with that Maxxis Tire Brand Blur. hahahahahaha like okayyyyy, lets just pretend we dint see any maxxis, carry on. 🤣🤣🤣

[@zachgibbons9290]

His childish laughter warms my heart

[@B.Tuff0]

This is why we love Sam.

[@lostwithasmile485]

When someone asks who is Sam Pilgram...the 9:20 mark is the perfect answer!

[@MrToppox]

😈😈😈😈 its going to be a driftng bike .. awesome. ... you are the man ! 😈😈😈😈

[@RacerX400600]

The stopped wheelie was my favorite part!

[@leonarko]

“The chances of survival are going to be minimal” 😂😂😂😂😂 4:44

[@gamndoodbrewing8636]

Why is everything Sam does hilarious?! 😂 keep it up 🍻

[@mossyhollow3732]

Go to a welding shop and have them make steel hoops that can be bolted on. Add titanium screws for white sparks. 🤘

[@JordyValentine]

Make some ski's for the rear out of Teflon and drive the front wheel instead, some cheap plastic kitchen chopping boards will work well

[@Macomac]

That looks like so much fun

[@dekun007]

2:59 xD perfect 4:03 perfect :D 4:23 i cant no more hahaha

[@louislienard]

Why is the "maxxis" blured on the front tyre ?

[@nevango2884]

he's sponsored by good year so he can't show the maxxis logo at least i think

[@Vhagn]

@@nevango2884 You can see the logo at 2:09

[@luisdenzel9536]

respect for the crazy stuff that you do

[@alexcampbell5162]

Spray the insides of some old tyres with release spray. Fit them to the rim. Cut a hole in the top and fill with deep pour epoxy. Let it cure then cut the tyres off.

[@Keyshawn420James]

Sams face as he drifts round that corner LMAO love this dude !!!

[@ilikeelevatormusic2175]

Ultra cool propeller ride 😎

[@mtbeyker9404]

11:05 , 12:19 Imagine going out with your dog and you see a guy on a trike DJ bike drifting with a paramotor on his back 🤣🤣🤣

[@better.better]

try PEX (plumbing, that's what it's called in the US anyway) you can cut it to length, close the loop with a fitting and crimp it closed after you get it on the rim. use a heat gun to "relax" it. Pex may not be hard enough though to last very long, but there's only one way to find out