You are an inspiration to all of humanity, remember this friend
@Josefppaz6 жыл бұрын
Tg Green thanks man it’s been a crapy week so seeing this makes my day appreciated
@kenyates4616 Жыл бұрын
How do you adapt the throttle cable? My is running from a thumb throttle push out, down to carb which want a pull back cable. Opposites
@Josefppaz Жыл бұрын
Been a while man. I believe I used a landing gear wheel holder from rc airplanes to hold the cable. I just used things which was laying around but easy way was just to crimp a wire housing around the cable and solder it. 👍
@coburnlowman8 жыл бұрын
I'm not trying to be an ass but that thing looks extra heavy. How long or many miles you getting from the drive tire? Been wanting to build one as well but probably use a HarborFrieght Clonda engine.
@Josefppaz8 жыл бұрын
Phil Lowman lol your right it was big and clunky I didn't want it to brake. I also didn't want it to light either if the tire would spin out in the back. this was mainly for testing. If I were to do this again it would be less bulky. For the rear tire I used a old moped tire from a junk yard. I've seen lots of people out there that there tire gets bald very quickly so I used this one so it would last longer.
@virginiapaddler48575 жыл бұрын
great build... i am concerned a bit about the large sprocket being so close to the ground. What do you think about raising engine so that frame strikes objects first and not sprocket.
@Josefppaz5 жыл бұрын
It’s not too bad reason I had it lower was to have a lower centre of gravity below the wheel shaft if not I would have the motor too high and it would be top heavy creating a high speed wobble hope this helps
@szentagostonka12 жыл бұрын
Hi! If you break the bike, not cause a problem the trailer?
@TheFastmozg5 жыл бұрын
Seems a very light)
@104stefan13 жыл бұрын
Great job, i was planing to build one my self this summer but didnt have the time, and next thing you know the money i had saved for the project was all out... the only concern i have is when you turn at a sharp turn and the engine is 90 degrees from the bike wouldn't that push you on the side when you hit the throttle ? Thanks Great work once again cheers
@EvendimataE12 жыл бұрын
is it not a problem when you are going uphill? not much weight is pressing the pusher to to road...so im thingking the wheel will slip when high torque is required....put a wheel in front of your pusher then you have a one full functioning scooter :D
@pacificcloud12 жыл бұрын
nice work
@suz38413 жыл бұрын
Nice job!
@samterravecchia74215 ай бұрын
Do you have videos riding with it
@Josefppaz5 ай бұрын
Just the one short one
@vespass211 жыл бұрын
good work
@dw80711 жыл бұрын
Perhaps a starter motor and battery from a mower so you can start it on the fly.
@68cgwayne11 жыл бұрын
it seems like it's a little over engineered in terms of the materials u used to build the frame with. should be nice and sturdy though. I like.
@whathacrapp10 жыл бұрын
Cool
@Josefppaz10 жыл бұрын
im happy you liked it cheers
@byronparsons74738 жыл бұрын
Nice job if u want more speed remove the 48tooth sprocket and put a 36 tooth more speed but less torque
@Skullkiller91111 жыл бұрын
to make it stable use 2 tiers
@SamGuimbellot11 жыл бұрын
I would just build a reverse trike over the pusher and ride the wheels off it!!
@thecbc76588 жыл бұрын
Soooooooooooooooooooo EXTRA! you should have just bought a 80cc bike kit
@metalkokorea6 жыл бұрын
i dont understand why people make things more complex. make it simple.
@Josefppaz6 жыл бұрын
metalko koma build one yourself then jackass
@pdavidwichner42856 жыл бұрын
Noice bike 👍
@XaLi_GaLi4 жыл бұрын
капец, намудрил, конструкция будто сцепка грузовика)), много лишнего веса, а первая ведомая звезда так низко, что на ней можно ехать и без колеса))
@Josefppaz4 жыл бұрын
Большое спасибо
@warriorcycles95178 жыл бұрын
YOU CAN PUT A SMALLER SPROCKET ON THE RIM TO INCREASE SPEED. THE JACKSHAFT SPOCKETS COULD BE SMALLER ALSO FOR SPEED INCREASE . THIS THING IS MADE LIKE MY WARRIORCYCLES. LAKELAND FL. PUT ME IN JAIL FOR RIDING IT .HERO'S WORKING HARD TO KEEP US SAFE . HERO'S OR SELLOUTS TAKE YOUR PICK.
@felderup12 жыл бұрын
maybe a cvt.
@tacomas960210 жыл бұрын
Put a 2 cylinder diesel on it lol
@Josefppaz10 жыл бұрын
lol I would go flying
@tacomas960210 жыл бұрын
A 20 HP honda would work too.... Or a Kx65 engine lol
@tacomas960210 жыл бұрын
How bout a CR500.... Hmnnn Or a engine from a Lamborghini.
@asssface200012 жыл бұрын
i know what it is i just lol at the way you said it. that pusher is WAY overbuilt and clunky looking.
@LuckyTown776 жыл бұрын
asssface2000 where is yours?
@LuckyTown776 жыл бұрын
A
@HugoSixx12 жыл бұрын
hi man! good job congratulations! check my vid (a pusher bike 5.5 hp honda clon machine) one question, What is the maximum speed?? the maximum speed of my bike is 115 km/h or 69 miles. bye
@luckyfawker26466 жыл бұрын
A wast of $$. Why not build a motorized bike? Fun I guess. Sorry Brother I tried to get it but don't. 🇺🇸
@Josefppaz6 жыл бұрын
Lucky Fawker I did build a motorized bike but this one was at the time still legal to ride on the road before they changed the laws here. What was still an advantage was the bicycle still had peddles which made it legalized