My DIY 14 inches touch display Streaming Player.

[@vladimirdovgan9387]

Ну вот молодец. Ну прям красавец.👏 С такой любовью, для себя.

[@DIYAudioLover]

Thanks

[@rickjohnston4001]

Very nice, I have the same display and it came with no instructions or support. Can you describe hookups and screen settings for the rasberry pi and volumio. Any help would be appreciated.

[@DIYAudioLover]

You can follow how to build link that I provided at the bottom

[@mamchristian]

Awesome project. Respect. Greetz from Germany

[@DIYAudioLover]

Thank you

[@gribob]

Congratulations for the wonderful work!! for me,newbie,It will be awesome if you coluld explain by a step by step guide to buy parts , assemble and configure. May i hope??

[@DIYAudioLover]

Check this out. 1. Raspberry PI4B. Ram 2GB 2. Power Supply. www.aliexpress.com/item/1005002126844156.html?spm=a2g0o.order_list.order_list_main.5.6db918024yJ0Xd 3. Display. www.aliexpress.com/item/1005002364481652.html?spm=a2g0o.order_list.order_list_main.19.21ef1802opkCRZ 4. Install Volume on Raspberry PI For configuration , I will write article on Medium soon.

[@K.Ax0y]

is it possible to do with raspberry 3b+

[@rushunt2131]

@@K.Ax0y It us completely possible, it might be a tad less responsive, the pi 4b is faster, but you are not doing anything super complicated and it will definitely work

[@rezhasan]

Where did you make the case? And does the screen work with Volumio as is or are some tweaks required?

[@DIYAudioLover]

I bought case from China and sent it to factory for CNC. The screen work right away with Volumuio

[@baraka6]

hi, that is a really nice setup you have for a media player, would it be possible to have a complete rundown of the full components you used besides the screen and power supply please. looking at it the whole design is very sleek so im guessing it is a custom case (if your able to give the name of the supplier or website to source), also did you use any pi related amps?

[@DIYAudioLover]

Thank you . Well , I will write another story for "How to build". medium.com/@pspracha/this-is-how-i-assemble-music-streaming-player-b413afa9aa41

[@baraka6]

@@DIYAudioLover i appreciate the reply, i will look at that link you supplied and look forward to the "how to build" that follows!

[@travis4619]

@@DIYAudioLover I’ve checked out your article but it didn’t have any info on the case/chassis ?

[@MAKdotCZ]

very nice project! I would like to use the same display for picore player. Do you know if the picore player will work with 2560*720 resolution ?

[@DIYAudioLover]

I'm not sure . As far as I know , picore doesn’t support ultra wide display. The alternative solution would be dietpi.

[@MAKdotCZ]

@@DIYAudioLover Thank You!, can I ask you for a link to the diy allu case? specifically the model where you're looking for the big display. I found some 430mm x 120mm but it has a smaller internal space because the sides are designed as passive aluminum coolers for the amplifier.

[@ontherun8]

@pspracha1 How much all the parts needed (Rap4+display+case) ? Thanks for let me know.

[@DIYAudioLover]

I already left "how to build" link in description.

[@diyhifi2632]

Can you please share the link where yo buy this screen?

[@DIYAudioLover]

You can follow how to build link . It explains everything.

[@diyhifi2632]

@@DIYAudioLover what is the brand of the screen and where to buy. Thanks

[@paju4406]

That lo oks great ! Do you build the chassis by yourself ?

[@DIYAudioLover]

I ordered chassis from aliexpress and sent it to CNC locally.

[@karimitchi9912]

hello it's beautifulll !! what is the reference of your vivaldi box? Thanks a lot

[@DIYAudioLover]

I am not sure I understand your question correctly. It's a DIY streaming player with the following configuration Hardware: Raspberry PI 4B Ram 2GB OS: Volumio 3.198 Display: wisecoco 14 inches touch display Extended Plugin : Now Playing , Peppy Meter

[@robertschumacher9640]

touch a bit slow?

[@nombreaqure3401]

It’s running off a local host server - so basically displaying a webapp or website embedded into the touchscreen. 👍🙏

[@WellnessWise79]

link where to buy your touch screen?

[@DIYAudioLover]

check AliExpress and search for HDMI touch screen.

[@prabhuja7554]

Have u tried 3.5 inch waveshare GPIO connection smallest streamer Bro??

[@DIYAudioLover]

I have another device built using 3.5 inches . I think it might be compatible with waveshare. Check this out kzbin.info/www/bejne/a4ate2CQl6p6pdE

[@albertogoldoni3542]

Very good! Yes a making video would be the best!

[@DIYAudioLover]

I will try.

[@edrianloisarborilla4602]

What os did you used?

[@DIYAudioLover]

Volumio for Raspberry PI

[@Stuart.87]

Too complex for me to build 😮😢 but that's a very nice and clean streamer.

[@DIYAudioLover]

Thanks

[@romanchik700]

Это самоделка? Если да, крутяк.

[@DIYAudioLover]

Thanks

[@KolfMAKER]

Great creation! Where did you buy the casing?

[@DIYAudioLover]

I ordered from China.

[@drbouzas]

@@DIYAudioLover OK, but where, on which page, do you have the link? kit is amazing

[@DIYAudioLover]

@@drbouzas there are plenty of chassis from AliExpress for example -->www.aliexpress.com/item/32273251950.html?spm=a2g0o.detail.1000014.6.c491dBXxdBXxjl&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.281175.0&scm_id=1007.40050.281175.0&scm-url=1007.40050.281175.0&pvid=9becf0cc-0afb-4b45-be01-e6c2534f648c&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.281175.0,pvid:9becf0cc-0afb-4b45-be01-e6c2534f648c,tpp_buckets:668%232846%238107%231934&pdp_npi=3%40dis%21THB%212180.81%211766.39%21%21%21%21%21%402103010b16888119456553914edf1d%2150182450755%21rec%21TH%212021265592

[@enput4522]

How did you make it work with a ultrawide display ?

[@DIYAudioLover]

just set the screen resolution to 1280x400 in config.txt

[@enput4522]

@@DIYAudioLover Does volumio come with a config file when i flash it? or how do i get to that?

[@DIYAudioLover]

Once flash volumio you can edit config.txt in flash card.

[@DIYAudioLover]

This will only work with the screen I am using which is HDMI interface hdmi_group=2 hdmi_mode=87 hdmi_cvt 1280 400 60 3 0 0 0

[@FindusXP]

​@@DIYAudioLoverwith this configuration, the display Is working 1/4 its native resolution. Did you tried to force at native resolution?

[@allanh9825]

Hi. How do i get one of those?

[@DIYAudioLover]

This is my DIY project. you can probably build it by yourself

[@Bates147]

How is the resolution?

[@DIYAudioLover]

1280x400

[@Bates147]

@@DIYAudioLover What type of screen do you have?

[@DIYAudioLover]

@@Bates147 wisecoco 14 inches touch display

[@sinusshephard5314]

Will you build and sell?

[@DIYAudioLover]

I just build for my hobby

[@JB-vc6xj]

The album scrolling is not very smooth, some latency 🤔 that realy would drive me crazy 😬😅

[@DIYAudioLover]

Yes. I also try dietPI which is a lot faster.

[@thiyagarajank6695]

Very nice. If u could make a making video, That'll be more informative. Expecting soon.

[@DIYAudioLover]

I am not good at making video. Anyway , I already created instruction in Medium. The link is in description.

[@dannyb5874]

I thought the Wisecoco is a 1920x550 screen. i have the same size, from Lesown, and its 1920x550. BTW Im doing exactly the same :) but with additional 8ch DSP build it, and IF I find space, with 8ch of amplification too.

[@DIYAudioLover]

I think my display resolution is 3840x1100

[@wrongIQ]

If I'd use RPi3 in similar setup will it work OK in your opinion? I'm not going to watch videos only hires audio

[@DIYAudioLover]

Yes it should work with RPi3

[@wrongIQ]

@@DIYAudioLover Thanks!

[@ramanjogi]

Resolution settings please

[@DIYAudioLover]

1280x400