My DIY CNC // Matilda - Thats a Wrap // Fluidnc

[@MrJesus4194]

Love your design. Can't wait for when you make those files available.

[@pdxcerealkilla9847]

Did that ever happen?

[@peacemakermotion3949]

Awesome machine mate! You've done well. I think i may have to look into making this beast when you've got the design files ready :)

[@user-j1111]

I am interested in the design files as well. A CNC router ist one my 2024 projects.

[@benpryce]

Beautiful work! Looks to be retail quality. nice work

[@rust941]

Incredible looking machine. Do you mind sharing how much you paid for the aluminium plates from pcbway?

[@gaiustacitus4242]

You are right to have some fear of very fast rapid rates. I once had a Z axis failure that left the spindle down when the program called for a raising the spindle and performing a rapid mode move to the other end of a part. Well, the machine proceeded to move at 20000 mm per minute (787.4 inches per minute) and pushed the part, fixture, and clamps off the table and onto the way covers. This caused thousands of dollars in damage.

[@RootCNC]

Love it! Keep up the great work!

[@NEWTechCreative]

Thanks Pete 🤩

[@fabog3732]

Where did you buy the closed loop motors

[@NEWTechCreative]

Au.stepperonline ebay!

[@googleyoutubechannel8554]

Bringing ERGABLED to CNC!

[@IceCreams62]

Hi. Could you please share your CL57T V4.1 configuration (DIP switches and rotating switch) ? Just to have an idea on how to start to set mine when it will arrive 🙂 Thanks in advance

[@NEWTechCreative]

Great to hear your going closed loop!! On the dip switches I have gone with 1600 pulse/rev on|off|on|on Then left mode off |off|off|off|off Rotary switch I used was: For my 5A (y)motors: ‘B’ For my 4A (x,z)motors: ‘5’ Hope this makes sense?

[@IceCreams62]

@@NEWTechCreative Yes, thanks a lot

[@sterneza]

Howdy, awesome project. Glad to see it up and running. Is the root controller a stand-alone controller, or do you need a PC to stream the gcode to it?

[@NEWTechCreative]

Great question! Yes this is a stand alone control board that manages its own control and uses an Sd card to store and read gcode files without processing from another device- however you will need a device to use as a remote screen to move CNC and initiate gcode files. The board hosts its own webpage that you connect to via Wi-Fi. Additionally you can use this via USB and connect to gcode senders like traditional grbl controllers…. Best of both worlds 🤩

[@jeffdolheguy3755]

I notice you run Ball screws I guess 5mm pitch and the machine looks 1200mm wide so do you have problems with Ball Screw Whip at high speeds. 'What is your max travel speed and what ball screw' while running the closed loop stepper online steppers ?

[@NEWTechCreative]

Thanks for your question! Yes I am using 1605 ball screws. I never pushed machine to absolute maximum as I really don’t need any faster then 8000mm/min. I can run the machine at 14000mm/min without a problem and no whip as I have tensioned both ends of the ball screw!

[@alejandroaguirre2355]

Does anyone know if the Matilda CNC CAD files been released yet? Any download links?

[@wyattkirchner4447]

Total cost aud?

[@NEWTechCreative]

Approximately $4500-$5000 AUD depending on how cheaply you can get plates cut!

[@CoffeeblackUk]

Discord Link Has Expired!!

[@NEWTechCreative]

I’ve updated link in description 🤩

[@vigigamehacker123]

Every shot is so 'cinematic' that you cant see wtf is going on at all, I just want to see where/how the rails are mounted, whats the ball screw block positioning etc. etc. but I feel like im watching a teen drama series

[@NEWTechCreative]

Hmmm happy to share more detail. Hard to see how it is relatable to teen drama series, however I suppose it’s not bad 0 budget and 100% passion. Feel free to jump onto my discord and I can provide more detail.