My First Project On The Workbee Z1+ CNC

[@williammcbride4978]

Brilliant Tommy I never thought watching a cnc working would be so satisfying great looking logo too

Thanks William 🙂

[@williamyoulad7064]

Brilliant work! This is the first time I’ve seen a project done from start to finish on the workbee, I’ve seen other videos on it working but they only show small segments of it so was nice to see it working on the full project, it’s also faster that I thought to! Would love to see the program side of things when you get up to speed and other projects from this CNC. Keep up the great work 🙌

Thanks Andrew 🙂, I am running it on the conservative side regarding feeds and speeds so has way more to give 😀

[@therelaxingwoodshop7495]

Excellent Tommy. Looks awesome

Thanks 🙂

[@ooznest]

Very nice project, VCarving like that is so satisfying to watch. We could watch that all day. The finish you applied really made it pop!

Thanks 🙂 I'm very happy with the result and performance of the workbee 👍

[@andrewriches506]

Good evening Tommy, excellent work, sounds like you will always be busy from now onwards.

Good evening Andrew thank you

[@keggyification]

Nice one Tommy. Nice looking sign for the workshop.

Thanks 🙂

[@kevkeelan5106]

Excellent 👍

Thank you 🙂

[@LusitanoPK]

Excellent, thank you. Good to see the Workbee in action at normal speed. I am seriously thinking about having my own.

Thanks Patrick 🙂, you should definitely pull the trigger on getting one you will enjoy every minute building and using it.

Oh and if you decide to purchase could you please use the link in the description of the video to get to the Ooznest site 🙂

[@thijsboomars8007]

Wow!!!! Great!!! 💪🏻👍🏻

Thanks 🙂

[@Jimc4007]

That logo turned out very well! Really liking your videos and the pieces your turning out. I would love to have a CNC, not necessarily that large, but one I could make other things with... alas, got to save up some more money first. Hopefully I'll sell some more of my other pieces and get there one day then I'll have to figure out where to set it up!

Thanks 🙂

[@iainrutherford184]

Fantastic job and such a relaxing process to watch... thank you for sharing.

Thank you

[@graveurgraveur2691]

Nice job!

Thank you 🙂

[@edwardoakley8659]

This was great to see :)

Thanks 🙂

[@stevesedgwick5789]

Great machine and a very complex logo. Good job!

Thanks Steve 🙂

[@woodworking_automation]

Very cool! Nice logo! excellent!

Thank you very much 🙂

[@QAYWSXEDCCXYDSAEWQ]

I have to ask, did you modify or add your own dust collection to this? Don't get me wrong, its working very well, but it looks like there is a lot tape holding things together?

That was just a temporary setup to get the machine up and running. I later added proper dust extractor and a dust shoe there is a video up on this addition

[@CopperheadCustoms]

Can I ask what file type you when with for this design? I'm new to cnc machines and I'm trying to work out the best CAD file to import in order to get nice details like you have here, I was thinking STL to have as much information as possible but the general feedback is that this methout will take ages. Any help is muchly appreciated

I'm new to the whole cnc thing myself. I used vectric aspire design software and I simply imported a gpeg design of the Celtic Knot and the software did a trace vectors. I do find an stl file will trace better than a gpeg picture file. I guess it is totally down to the design software you are using

[@crissstinaa0]

Does it burn the edges when you cut with it?

No it doesn't burn any part of the project

[@Eagles_Eye]

Im on the lookout for a reasonable starter / beginner cnc. in your opinion, does this one work well?

Absolutely, I have had no issues with the cnc over the past 2 years. It is easy to build and is an ideal hobbyist machine.

[@Eagles_Eye]

@ thanks allot for the response! I got a few machines in mind but this one is by far the most interesting.

@@Eagles_Eye if you check out the build series of videos you will get a very good understanding of how to machine is built and the quality of the components and adjustability of the setup to have a very accurate machine. For the cost it would be difficult to get a comparable cnc.

[@Eagles_Eye]

@ do you use the workbee control software?

[@ryanbrogan2910]

will this thing cut 18mm marine ply?

It would but not in a single pass

[@Tarbard]

Love the sign. I'm looking into the workbee z1+ but there aren't that many videos around about it yet.

Thanks, I have a playlist of videos building the Z1+ and I will be adding further videos. Its a cracking machine you won't be disappointed if you decide to get one 😉

[@jamesconnolly655]

Very good enjoyed watching this 👌 such nice detail on your logo 🙂

Thanks James 🙂

[@JohnMcGrathManInShed]

Turned out great Tommy, how are you getting on with it I'm considering getting a CNC

Hi John, getting on good but must say it's a bit of a learning curve and has its pros and cons depending on what it's used for. You are more than welcome to come check it out if you would like see it in action etc.

[@Toshtiger1]

What type of wood is that ?

Hi, it's just some Maple veneered MDF

[@paulbateman5769]

Great work Tommy. Have you done a 3d carve yet?

Thanks Paul, I have done a small amount of 3d carving just a few simple designs. Will definitely be doing more in future and will include in a video.

[@paulbateman5769]

@ nice one. I'm looking at buying a cnc and stumbled across the one you have . The price is very reasonable so I think it's going to be the one and I will be following your channel 👍🇨🇮🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@DogSerious]

Oh, your first project is a witchcraft sign? Eerie workshop.

I must say that's a new take on it 😂

[@joedefloat7802]

Is there one for everybody in the audience Tommy ? 👍👍👍👍

Haha this isn't the late late show 😅 🤣 wouldn't think anyone would want my logo 🤣

[@whitefoamsea8070]

Could you do inlay work on a guitar fretboard?

Absolutely 👍

[@TheSmellyArab]

Awesome video! Im looking at buying a workbee, just curious, do you have to manually switch off the router between bit changes and things like that? Im completely new to CNC-ing 😂

Hi, Yes you have to manually stop and start router. There are some milling motors available that can be controlled by the software but they are fairly expensive.

[@TheSmellyArab]

@ thank you, I’m just trying to take in as much info I can before I get one so it’s not a dead start

[@BAHATI1943]

Are you sure you do not work for Ooznest? What an excellent set of construction videos. I think you have encouraged me to have a go. Thank you.

I'm glad you liked them and I don't think you will go wrong if you decide to get one I'm still learning but loving every minute of the journey. And I'm certain I don't work for ooznest lol.

[@danofrano2035]

Hellow brother, how can I get tha kind of Machine?

ooznest.co.uk/#a_aid=6230bffcd97fc. This is the link to the Ooznest site where you can get this machine

[@pi3ladbd417]

Can you run this all day

Absolutely