My First Syncmode V2 FPV Build

Building my first Syncmode V2 FPV Frame. In this video we go through the build process and talk a bit about electronics and how to fit out the frame.
Timestamps:
0:00 Intro
0:40 Kit Parts
1:53 Frame Overview
3:27 Frame Build
5:28 Arm Protection
7:37 VTX Mounting
9:29 Looking at Component Spacing
9:55 Electronic Components
10:55 Motor Selection
12:46 Mounting Components
15:37 About Soft Mounting ESCs
17:09 ESC Hard Mounting
17:39 Stack Spacing
18:09 Soldering Tips for FPV
20:18 Soldering Battery Leads
22:14 Mounting the Spike Absorber and Cap
23:32 Motor Mounting and Soldering
23:51 Flight Controller Wiring
24:56 GoPro Session Mounting
26:05 Battery Mounting
27:40 XT60 Soldering
28:37 Close
Components
Frame: Syncmode V2
supaflyfpv.com/product/syncmode/
Receiver: ELRS
VTX: Caddx Vista
Flight Controller: HGLRC Specter F460
cubefpv.com/product/flight-controller-stack-hglrc-specter-f460/
Motors: iFlight XING 2306 1700KV
cubefpv.com/product/motor-iflight-xing-2306-1700kv-unibell/
Props: HQ Juicy J37 4.9X3.7X3 4937
cubefpv.com/product/5-inch-props-hq-juicy-j37-4-9x3-7x3-4937-3-blade-blue/
Battery: GNB LiHV 6S 22.8V 1100mAh 120C
phaserfpv.com.au/products/gaoneng-gnb-lihv-6s-228v-1100mah-120c-xt60-lipo-battery
30 Degree GoPro Session Mount STL: Contact me through CubeFpv website and I'll send it to you.
▼ My Website: cubefpv.com/
👉 Resources: cubefpv.com/home/resources/
🛒 My Webstore: cubefpv.com/shop-page-main/
Flight Footage Example Content
Rotor Riot
www.youtube.com/@RotorRiot
GeorgeFPV
www.youtube.com/@georgefpv3930

[@ChrisQuadFPV]

Beautiful Build 😊😊😊😊😊

[@FlybyJames]

Great build and well produced video. Thanks for sharing.👍

[@MicronWings]

Thanks - Trying to do something interesting and new with the production.

[@ThePieSnatcher]

awesome video production! Little confused as to why tpu protection for the arms wasn't used. What's the reason behind hard mounting the esc? is there any difference? Awesome video once again mate :) when you were soldering how did you get the spin shots?

[@cubefpv]

The TPU boots on the arms serve 2 purposes - mainly to protect the arm ends from delamination in a crash into concrete and as pads for landing. I'm not doing bando bashing with this one so I chose not to use those and instead put the bolt seats underneath to land on. I like to hard mount so the only thing soft mounted in the stack is the FC. Hard mounting also gives more room vertically in the stack. Used an "Andoer L4 Dolly" for the moving shots. Thanks for your support mate.

[@jkwilson35]

Hi do you sell any of your quads on mercari ?

[@cubefpv]

Interesting thought. Maybe if I had more time to do building. But I hardly have time to build the drones I want to build for myself.