My first YouTube Video! Installing eBay headlights on F150! Cheap LED!

Hey everyone, this is my first KZbin video and I ended up having to upload and edit from my iPhone 11 Pro Max because my MacBook doesn’t handle 4K video, so bare with me! Subscribe for more content to come!
Headlights - www.ebay.com/i...
LED H1 type bulbs - www.ebay.com/i...
Third brake light - www.ebay.com/i...

[@kaitlyngekiere1721]

New lights look sweet! Looking forward to the next truck project!

[@mikemartin6857]

My truck was just dropped off at the shop today for some light body/ paint work and a brand new set of these In the box are being installed as well. Looking forward to it! 💯 Like the vid

[@RRANGELTV]

could you send me the link? his link wont open

[@alexaattard7824]

Sickkk!!! Just ordered my H1 bulbs!

[@nathankiser7058]

I got the same 3rd brake light. I had to fiddle with the connectors a good bit to get it to work but haven’t had a problem since

[@francescobuscemi500]

Jacobson drill a hole on the fan cover, good job buddy i love it!!!

[@Jvrdln]

For the 3rd break light…. I kept the original with Led lights from LASFIT led. They’re very very bright …..

[@twoweary]

The headlights look really nice . I have 2011 Lariat that I love . I wouldn't care how bright the 3rd brake light is (as long as it matched stock brightness), but I would definitively want the bachup light brighter (is it ?) . Maybe the misses could hold the camera on shots where a tripod won't work. Great first video, keep up the good work !

[@310WoodWorks]

How did you wire the replacement led bulbs?

[@RRANGELTV]

Are these still available? trying to click the link in the description they wont open it gives me an error page

[@benjamincruz514]

Those two spots in the middle are your hotspots for light farther down the roads

[@JbbJake]

Get the Raptor third break light and use a 921 led instead.

[@vinhgolf]

Great video. you have link for the front grill?

[@raulcastillotexasrealtor410]

Have you had any complaints since you installed these headlights? I'm thinking of ordering them and your video is very helpful

[@Dispair06]

One of the first mods I do to any Vehicle is the headlights Finally! BLACK FRIDAY is HERE to SAVE the Day! Headlight Revolution has got a killer Black Friday sale for everything in the store! You can snag deals on items for up to 25% OFF! Don't miss out this next week on these great deals while you can! You don't want to wait to upgrade the lighting on your vehicle! Check it out Starting Monday the 22nd!

[@ILockert]

10 months later how are the bulbs doing?

[@ericmilliman2228]

Did you ever adjust the beams on the lights? I have them in my truck and keep getting flashed. I can adjust the high beam but don’t see anything for the low beam.

[@jacobbuscemi8586]

I don’t have the truck anymore sorry. If you mean the spread of the beam then yes I used the adjusters on top of the headlights and they were fine.

[@trugritlit6272]

How r they all holding up? I just got the amerlite switchbacks and wanted to install leds to replace the stock halogens they come with...

[@jackconway3248]

Did the new replacement headlights not come with LED bulbs?

[@ordnajelaaadartse3917]

What size tires are on this truck?

[@fernandoborunda1241]

Can you make a separate video on how You spliced the wires please?

[@fernandoborunda1241]

And make a new video to show off how the truck be looking like now 😎

[@jacobbuscemi8586]

The wire splicing is in this video, if you’re looking for exactly what wires I spliced you can find a link to the forum page I used and between that and the video you should be good!

[@S_Carolina_Pyro864]

#200 sub. Nice demo, have you had any problems yet? And have you had any moisture issues

[@fdurango]

I really need to know where can I buy that front license plate mount to the side. Please let me know anyone! Thanks

[@NoemisDad77]

Have you had any moisture problems? It's been a year. If not, I'm definitely pulling the trigger

[@hectorlopez1344]

#41 here🤙🏽... looking forward to your vids

[@lheogarcia5611]

What brand did you get for bulb high and low beam headlight

[@Dkang1443]

What type of wheels size and tires size do you have? I like your setup!

[@juansalvadordiaz]

So, how do the work at nigh? Are they better than the originals? I mean with some time using them

[@ah4800]

How the leds and headlights holding up 2 years later

[@alexcea5709]

How are these holding up the headlights ?

[@satan3726]

are both bulbs on for the brights?

[@ordnajelaaadartse3917]

What type of lowbeam u used?

[@txkingg]

Did these last?

[@fireman616wfd]

Hey man.. did you use the same bulbs in both high and low beam?

[@fortis12]

Was your main headlight connector 4 pin or 3 pin ?

[@efm2169]

Did you end up getting the h7 and if so which ones did you get?

[@kingdomsan3335]

I have a problem,I ordered the same ones but to conect the socket for the high beam have 4 enters and the new lights have only 3,can u tell me what I can do about it?

[@nickcrimi9657]

Same problem, factory has a four pin and these new bezels will need to be modified

[@urdaddyefrain]

Wondering if you need the h1 bulbs for high beams? I have led lights in my truck already and they have high beam built in. Would I need to purchase additional bulbs for high beams?

[@jacobbuscemi8586]

Yeah high beams are separate lights

[@jordangonzalez7420]

I put these headlights in my truck but the green wire needs an adapter or something to connect to it

[@bryceberliner2174]

Hey man great video! I recently purchased a very similar pair of headlights but they use halogen and have a prefabricated similar to what you ran into. I have LED bulbs that I used to replace the stock ones with the stock headlight assembly. How did you replace the halogens with the led you put in?

[@jacobbuscemi8586]

they were plug and play

[@braydenbledsoe3252]

Can you replace the low beam and high beam lights?

[@jacobbuscemi8586]

Yes I replaced both with cheap led bulbs on Amazon so far so good

[@braydenbledsoe3252]

@@jacobbuscemi8586 I think I might buy this then. Thanks.

[@bretlinden8248]

How are they holding up after 9 months? Any water in them?

[@jacobbuscemi8586]

Nope, no water, they haven’t shown any sign of defect imo for the price I recommend for sure

[@taniaarevalo6254]

question: when you purchased these from razor motor on eBay did you put 1 quantity or 2 quantity (I am a bit confused if 1 quantity means 1 pair?

[@jacobbuscemi8586]

They come in a pair

[@lasseigne13]

When you turn the blinker on does the side mirror blinkers still work as well?

[@jacobbuscemi8586]

The mirror lights were burned out on this set but I replaced them with tire mirrors with switch back LEDs and yes they work

[@MrQUICKRABBIT]

I have these exact Headlight on my F-150 2013 STX. I just have a question I ordered some LED lights now I noticed the headlight is covered... how am I supposed to plug in the LED if the cap is closed do I just run them without the cap? I ordered some Sealight S1/H13 9008 lights they come with a conversion plug

[@jacobbuscemi8586]

I used whatever the truck calls for but the LED version, they plug and play and the plug is on the inside of the cap

[@MrQUICKRABBIT]

@@jacobbuscemi8586 ok when it arrives hopefully it’s an easy plug install

[@MrQUICKRABBIT]

@@jacobbuscemi8586 yea mines didn’t fit

[@chimes1134]

Thanks for the video, did you end up keeping that cap on? The LEDS I got have a fan but it’s too large to put on, did your fan just perfectly fit? Same with the low beams?? Also did your beam pattern come out good? Mine didn’t for either lows and high beams and i put the LED in 3 and 9 positions

[@jacobbuscemi8586]

Yeah I kept the cap on everything fits no issues, no issues with cooling either

[@keithmatt1485]

At 13-14 seconds an orb appears to move over your right shoulder and disappear...so.eone may be watching over you. BTW ur truck is bad ass!!

[@jesse_m.grosso2378]

Will these take H13 LED?

[@jimwalker3207]

Hey Jacob, Found a similar set of lights on Amazon, Brand is Amerilite...Look the same. Is that a step on the tailgate, if so can you post a link? Thanks

[@jacobbuscemi8586]

The tailgate step is integrated to the tailgate. It comes on the platinum from the Factory

[@jimwalker3207]

@@jacobbuscemi8586 OK thx...lights look great!!

[@Nick5Riley]

good video, did you have to add resistors to any of the LEDs for the H1 or H7? Or was it just a straight plug in and then get the clip worked back over?

[@jacobbuscemi8586]

No resistors, plug n play

[@Nick5Riley]

@@jacobbuscemi8586 okay awesome! do you have any issues with hyper flashing or the LED's flickering?

[@jadenkoehler6089]

Are the H7 bulbs just a fog light that you put in your bumper?

[@jacobbuscemi8586]

No I plan to delete the fog lights when I do a bumper

[@Tumi_n_Company]

Any condensation issues?

[@jacobbuscemi8586]

So far so good! No condensation

[@Kaljor92]

Hey bro i just scooped up a 2012 fx4 eco boost i was looking at those headlights too. I wonder how you’re liking them so far?

[@jacobbuscemi8586]

Love them no complaints

[@Thomasbqz]

Did you put the LED in the low beam or high beam?

[@jacobbuscemi8586]

Both got LED

[@jaysonmartinez2830]

Great video... I don't have those headlight housings, but I think with the LED needing the fan to keep it cool....you should leave that "cover" off to keep it from over heating

[@david_derlak]

That cover is the moisture seal. if he removed it, the inside off the casings could fog up.

[@mrbrightside4082]

Anyone else see that weird orb at the beginning of the video??? Was very weird.

[@trudeaumustgo1920]

Any condensation yet

[@36carson44]

do the headlights come with all the bulbs u need or do u have to buy separate bulbs

[@jacobbuscemi8586]

I replaced any and all bulbs I could with LEDs link in comments

[@36carson44]

@@jacobbuscemi8586 i understand u replaced them but im wondering if its necessary or if its just something u wanted to do

[@jacobbuscemi8586]

@@36carson44 I paid around 20$ for high and 20$ for low beams extremely bright LEDs. For them being so cheap I’d say it’s necessary these days although they did come with bulbs

[@36carson44]

@@jacobbuscemi8586 okay thank you

[@lexgonzo6774]

What is the link to the headlights?

[@Seniorsix]

You got a link for the tonneau cover?

[@jacobbuscemi8586]

This is the x4 bak revolver, www.tonneaucovers.com has the best deal

[@justindeyoung9968]

Interested in how the headlights perform at night

[@jacobbuscemi8586]

Headlights are 1000x better than stock at night

[@Tyler-ye9tm]

What bulbs did you get for your low beams?

[@jacobbuscemi8586]

The links are in a reply to another user asking!

[@jacobbuscemi8586]

www.amazon.com/dp/B07FRC77GX/ref=cm_sw_r_cp_awdb_imm_t1_a3B-Fb70MWKZ4

[@thejet4619]

hello, where did you buy your car screen?

[@jacobbuscemi8586]

Hello I’m not sure what you mean by “Car Screen”

[@thejet4619]

@@jacobbuscemi8586I was referring to the one on the interior dashboard. I thought you had put one on it because my car is the same model as yours but it doesn't have a screen. Do you know where I can get a screen?

[@jacobbuscemi8586]

@@thejet4619 this screen is OEM it came in the platinum, limited, and I believe was also an option in the lariat and XLT

[@thejet4619]

@@jacobbuscemi8586 Ok, but you don't know where I can get a screen?

[@jacobbuscemi8586]

@@thejet4619 idk man, Ford. Search it online.

[@maxexb]

I wish these came without the amber corner

[@trudeaumustgo1920]

Illegal to not have amber corners

[@isaacocasio3165]

Were the low beams halogen or led

[@jacobbuscemi8586]

I have all LED bulbs in these lights

[@isaacocasio3165]

@@jacobbuscemi8586 which bulb did you use? Would you mind posting a link? You may have convinced me lol

[@jacobbuscemi8586]

@@isaacocasio3165 Aukee H7 LED Headlight Bulbs, 50W... www.amazon.com/dp/B07FRC77GX?ref=ppx_pop_mob_ap_share www.ebay.com/itm/2pcs-IRONWALLS-H1-LED-Headlight-Bulbs-Kit-2200W-330000LM-Super-Bright-Hi-Lo-Beam-/292363803769?_trksid=p2349624.m46890.l49292 One is high beam and one is low beam

[@isaacocasio3165]

@@jacobbuscemi8586 awesome man, thank you!!

[@thomaswatkins7789]

Yvan you post a night ride video please

[@ordnajelaaadartse3917]

Hey man are you still making content?

[@jacobbuscemi8586]

I am but I haven’t been consistent due to life

[@ordnajelaaadartse3917]

What size of tires are you running on it it really looks bad ass.. I have same wheels but not sure on the tire size

[@jacobbuscemi8586]

@@ordnajelaaadartse3917 these are 2019 raptor take offs, wheels and tires. Tires are 35” BFG KO2s

[@ordnajelaaadartse3917]

Thanks for the answer I appreciate it , last question do you have to do any modifications on the front suspension or leveling kit ? Upper control arm on the way?

[@jacobbuscemi8586]

@@ordnajelaaadartse3917 just a 2.5” level on the front to fit the 35”

[@cristobalagnrb]

Perronsisima!!!!

[@Quisexual]

dont do that (editing tip)

[@wesleylindley1229]

How did you wire up the bulbs ?

[@Tobyspostings]

How did you paint your chrome bumper to black?