My jewelry DESIGNING process, learning new techniques, making mistakes

Welcome back to another day in my jeweler's studio! Today I'll show you my jewelry designing process and how I learn new techniques. I also have some tips to share with you! Sit back, relax and enjoy the video :)
⭐️ My shop: www.stardustmine.art/
⭐️ My mini online course: How to make silver flowers: art-of-metalsmithing.thinkifi...
⭐️ Follow me on Instagram! 😊
/ stardustmine.art
/ artofmetalsmithing
⭐️ Want to see more? Check out these videos!
- Next vlog: Cozy ART DATE! How slow productivity is changing my life as an artist and maker: • Cozy ART DATE!⭐️jewelr...
- Self employed jeweler in Poland: photo shoot in the forest: • How I work as a self e...
- How I make a themed jewellery collection: • How I make a THEMED je...
⭐️ Additional resources can be found on my Patreon page!
Find out more about becoming a Patron and ways to support the production of the videos: / stardustmine
⭐️ JEWELRY MAKING TUTORIALS:
UNISEX RING step by step tutorial: • HOW TO MAKE A RING - t... ​
BEZEL step by step tutorial: • SILVER BEZEL for caboc... ​
RING from start to finish: • How to make a ring - f... ​
GOLD FILLED RINGS tutorial: • How to make GOLD FILLE... ​
⭐️ BASIC TOOLS:
- Dremel torch: amzn.to/3UafQtc
- Third hand: amzn.to/4bgB9jJ
- Soldering tripod: amzn.to/3JljTxC
- Soldering block (honeycomb): amzn.to/4azIgnp
- Soldering charcoal brick: amzn.to/3xI8c1t
- Solder pick: amzn.to/3UkLoO0 or amzn.to/3W6otHB
- Borax cone US: amzn.to/3W2A0Yt
- Hot plate for pickling: amzn.to/3xGZ8tP or amzn.to/3UiMie2
- Glass beaker amzn.to/4d3rSgg or glass bowl amzn.to/4cUlkRj
- Basic saw frame: amzn.to/4aUBbgP
- Saw frame: amzn.to/3U2jULN
- Bench peg: amzn.to/3w6LIGO
- Bench peg and anvil: amzn.to/49GfUGJ
- Saw blades: amzn.to/43YYMe9
- Dremel 3000 hand rotary tool set: amzn.to/3U2EqvZ
- Dremel 4000 hand rotary tool set: amzn.to/3U14Q11
- Dremel Flex Shaft Attachment: amzn.to/3xJmaQQ
- Foredom Rotary Tool - amzn.to/3vVGMEI
- Center punch: amzn.to/3JkV9FR
- Rawhide mallet: amzn.to/3vXYs2I
- Ball pein hammer: amzn.to/3W3ZFAa
- Chasing hammer: amzn.to/3UahCKS
- Ring clamp: amzn.to/3JjcIGi
- Ring bezel pusher: amzn.to/3xBCH9f
- Set of pushers: amzn.to/3Uknpyq
- Burnisher: amzn.to/3UkE4lt or Agate knife burnisher amzn.to/49LH3I5
- Barrel (tumbler) polisher: amzn.to/3xyraaE
- Ring measuring mandrel: amzn.to/4aWF2do
- Ring measuring tools set (mandrel, mallet, sizer): amzn.to/3xBD0AV
- Half round pliers: amzn.to/49EJtbF
- Flat nose pliers: amzn.to/4cUkp3j
- Round pliers: amzn.to/3TWpgrY
- Pliers SET: amzn.to/441lJgI
- Wire Cutting pliers: amzn.to/3Q6BGMP
- Flush cutting shears: amzn.to/3xzwwCu
- Steel block for bench top: amzn.to/4aVPeCF
- Selection of sandpapers: amzn.to/3Q5GZMl
Some of the links are affiliate links, which means that, at no additional cost to you, I may earn a small commission if you click through and make a purchase.
⭐️ LET’S CONNECT!
My website: stardustmine.art/
Instagram: / stardustmine.art
Facebook: / stardustminejewellery
Pinterest: / thestardustmine
#jewelrymaker #studiovlog #jewelersvlog
Sub count: 99,084

[@TheArtOfMetalsmithing]

I hope you enjoyed this vlog! If you did, please consider giving it a like, it truly helps with the algorithm a lot! :) And to watch next: - Cozy ART DATE! How slow productivity is changing my life as an artist and maker: kzbin.info/www/bejne/aIKad5JjqZZkqq8si=-9KkBEr4GO2u0Oo3

[@WinniemaeHooray]

This felt like sitting down with a good friend and having a lovely conversation while drinking tea (I had coffee :)) and sharing ideas in a safe, creative space. I LOVE your videos, Basia! I love your bright and positive look on the creative process. I too procrastinate when I feel intimidated by trying something new. This video has put me in the mood to try something new today! Thank you, Basia! 🥰

[@TheArtOfMetalsmithing]

Aww it means the world to me, love! Thank you so much for such a sweet and encouraging comment ❤️ I love making these vlogs, but sometimes I'm not sure if what I talk about is even interesting 🙈 I'm so happy to hear that you enjoyed it and find it valuable. However, there's one solid improvement I need to make and that's the microphone! I just purchased a portable mic and I can't wait to use it in the next video. I'm sure it will improve the quality of the sound, so that hopefully the videos will be nicer to watch 😍❤️

[@jadeheart911]

I think I just drooled on my keyboard when I saw all those gem stones !!!!!!! OMG ! My addiction and now while my studio space is down and packed... I cant stop adding to the hoard !!

[@TheArtOfMetalsmithing]

hahaha oh gosh, I feel you!! I'm the same, looking at other makers' gemstone collections always makes me excited, but it's also dangerous, as it makes me want to purchase more pieces haha 😂

[@skinnychallenge]

I recently started making jewelry again after years of talking about it. Your videos make me feel much less intimidated by doing what I love and I already have inquiries about selling my pieces. Honestly it's a whole new world! Thank you for your lovely and relaxing (and informational) videos, they/you make my day :)

[@TheArtOfMetalsmithing]

that's so wonderful to hear! And so sweet of you, I appreciate it a lot ❤ I'm sure you will enjoy making jewelry a lot, have fun!

[@Suboptimalconditions]

I can’t wait to have a workshop. You’re the most talented and kind person with the most beautiful gentle voice. I don’t know anyone who is as wonderful to listen to as you are. Thank you for constantly inspiring me to move forward with creating my silversmithing dreams. ❤

[@TheArtOfMetalsmithing]

You're the sweetest! Thank you so much, this truly means the world to me and motivates me a lot too. I appreciate it with my whole heart ❤

[@stephencoster9532]

Hiya Lady Stardust, So, less procrastinating and more doing??? A lesson I need to learn, too. Now, about Smith Little Torch? And a few other things... Oh, it's so good to be doing comments again. Thank you for a wonderful video, Basia; it is up to your standard. Not over long, bright, informative, and made with a love of imparting knowledge and sharing the joy of making. I finish treatment next Wednesday and look forward to making the gold Christmas presents I told you about. I've some earrings to make this weekend for the tec ladies at Radiotherapy. Your collection of gems always fills me with envy; you have a great eye for a perfect buy. I've seen from the comments that you are inspiring as many people as ever to join us; well done!!! Stay safe, dear Basia, Love Steve xxx

[@TheArtOfMetalsmithing]

Hi Steve!! So happy to see you here again, we've missed you! ❤ I hope the commenting issue is solved, I have no idea what could've caused it. So happy you enjoyed this video! I had fun making it and I hoped you would enjoy it too. I never know if the scenes and subjects I choose to show and share in the video will be interesting for others, but seeing the current views and reading comments, I think it's safe to say that this one was well received ❤ :)) I'm looking forward to seeing the gold present you will make! I hope you can share it with me, maybe a photo? I'm curios to see how it turns out :) Thank you so much for watching and being here, as always, it means a lot and brightens my day. Stay safe, Steve xx

[@archerandthemouse]

What a beautiful studio, I don't think I have ever seen one so clean and organized, metal smithing is so messy and your hands and nails are perfect, even your apron is perfect. How do you do it?

[@TinatinaMak]

Love the music in the beginning! Love your videos!

[@mili9808]

Thank you for share this. Blessings from Puerto Rico 🇵🇷

[@TheArtOfMetalsmithing]

You are so welcome, thanks so much for watching! :)

[@skullingtonfly]

Enjoyed 👏👏👏

[@wendyvancamp1738]

You have such a lovely workshop. I love the way you store and display your stones for designing. I usually just place mine out on a table and then back into a box when I'm done. Your way seems to protect your stones in storage much better. While I don't do as much metalsmithing these days as I have in the past, it was a delight to watch another smith at work. I could feel my saw in my hands as you worked with yours. I look forward to seeing more of your videos.

[@celesteg9020]

Soooo HAPPY to see you again and learn more valuable lessons!!💞

[@TheArtOfMetalsmithing]

Thank you so much ❤ There's more to come, I can't wait to share everything :)

[@pennycandyys]

Thanks for getting me out of the house 😉, I enjoyed coming over for a visit and sharing a hot drink and some creativity with you! Oh btw, aren’t those Betta fish, rather than Koi? Regardless, they are lovely!

[@Silverring9250]

Lovely

[@Paullebbon]

I love your enthusiasm and positive attitude. Great ideas and tips. Thank you 😊

[@TheArtOfMetalsmithing]

Thank you so much, Paul! That's very kind

[@PranaadhikaSinhaDevburman]

Needed to see this today ! Thank you ❤

[@TheArtOfMetalsmithing]

Thank you sweetheart! I'm glad you enjoyed it ❤️

[@matthiaslow8533]

Hi, I truly love your works learn a lot and wish I can do like you do. Thanks a lot for sharing.

[@jeannettesalazar6442]

😮 wow

[@jacqueagawlik7897]

Just started watching your videos. Thank you for sharing your process with us.

[@TheArtOfMetalsmithing]

My pleasure! So happy you're enjoying it, it means a lot ❤️

[@amyj.s.9610]

Your space is so warm and cozy, and very well organized. I would live to have a similar clean and bright space to work in! Thank you for sharing your process!

[@TheArtOfMetalsmithing]

Oh yes, good light makes a massive difference. My previous space that I had for about a year before this one was very dark and sad. I did what I could using artificial light, so it doesn't look so bad on the videos. But this one was a game changer, bright space makes you feel entirely different and so much better ❤ I hope you will be able to get a lovely space for yourself too! ❤

[@altinhandmadejewelry]

❤awesome as always. So relaxing after this crazy day🤗

[@TheArtOfMetalsmithing]

Yay!! So happy to hear that 😍 thank you for watching, have a restful afternoon 💕

[@ZaroniSoulCraft]

I had never left a comment on a KZbin video until now. Your videos are exceptionally wonderful, and I couldn't resist leaving a comment. Your authenticity and positive energy are truly heartwarming. I have recently started crafting metal jewelry and dream of turning it into a business one day. However, I often face challenges and make mistakes, leading to moments of self-doubt where I question my ideas. When I see your creations, they are works of art, and I feel that I might never be able to achieve that level of craftsmanship. However, your videos provide a glimpse into your honest and ongoing learning process, reminding us that learning is a lifelong endeavor, and it's perfectly acceptable to stumble along the way while continuing to forge ahead. Embracing mistakes and moving forward is part of the process. Thank you very much for being a genuine source of motivation and inspiration, and for sharing your knowledge freely. 🤗

[@TheArtOfMetalsmithing]

oh wow, thank you!! This means the world to me! I appreciate your kind words and encouragament. Yes, absolutely, it is a constant learning process and I'm nowhere near perfection. I make a lot of mistakes and sometimes things don't turn out the way I want or how they should. It's a long process, so I always try to focus on the joy and small steps :) I encourage others to do the same, have fun, experiment, practice and not let the frustration get to you. They way you said it is just perfect, I wish everyone could read it ❤ Thank you again ❤

[@vanessagray2677]

Really enjoyed seeing your workshop and how you create some if your ideas 😊

[@TheArtOfMetalsmithing]

That's so wonderful, I'm very happy you enjoyed it! Thabk you 😍❤️ I'll publish another vlog like this in a couple of days 🥰

[@jeannettesalazar6442]

I founded your videos today and I love them. Thanks 😊

[@TheArtOfMetalsmithing]

I'm very happy to hear that you do, thank you so much ❤

[@TheMolli555]

Your studio is dreamy😍

[@TheArtOfMetalsmithing]

Thank you :)

[@PhoenixCreationsKaTyJs]

12:10 ps mind don’t drink tea from thst cup or muddle the cups up 😂😂. I love watching you saw you make it look SOOOO easy! 😊

[@tammiehonican76]

Can't wait to see what you do with the fish! Love your videos!

[@TheArtOfMetalsmithing]

ohh I can't wait to share how they all turn out! ❤ Thank you so much

[@margaretgarciarivera7527]

I Just start learning and you really inspired me love youre video❤

[@TheArtOfMetalsmithing]

Thank you! I'm very happy you feel this way ❤️ Good luck!

[@OFFROADTRAVELVLOG]

Wow i hope to visit poland and learn jewelry making😊😊😊

[@jwon5614]

I would love to see a video on the beading tools-especially the ball technique! Such beautiful work you have!

[@TheArtOfMetalsmithing]

I'll definitely make a dedicated video about it once I practice and get better at it 🥰 Thank you so much!

[@ChenBoonOoi]

hello from Malaysia. Thanks for your sharing, it is interesting.

[@kjirstenboucher9682]

Loved this video! Ok, so I always like your videos. It was fun to see how you work in your studio, how you design, some of the tools you are using, and some new things you are trying out. Thank you so much for sharing.😊👍💖✨

[@TheArtOfMetalsmithing]

my pleasure, Kjirsten, I'm very happy you enjoyed it ❤ I'm already working on another vlog like this, I hope you will like it too! ❤

[@kjirstenboucher9682]

@@TheArtOfMetalsmithing I am sure I will.👍😊

[@hanfleet]

Thankyou for such an inspiring video. Love to see your studio and tools. Never heard of protoplus before. Looking forward to seeing your completed flush settings. :)

[@TheArtOfMetalsmithing]

Thank you! I'm very happy you enjoyed this vlog, it felt so good to film it again and I had a lot of fun. It felt like a meeting woth a friend :) ❤ it's protoplast, it's great! I recommend it a lot. But I think the water I used was essentilly too cold, that's why I had these white elemets that didn't go completely transparent

[@kendrabosten1]

I love this. I keep putting things off as well...like flush setting and tube setting. I think new things scare me a bit so I tend to not pearn them which is silly. Lol. I loved your video. ♥️

[@pattiklaus9580]

Those beads would be beautiful on your koi! Also maybe the mantas

[@TheArtOfMetalsmithing]

I agree!! I need to test it out 😍

[@pirazyoko]

Basia! Wspaniały filmik, super mi się oglądało

[@TheArtOfMetalsmithing]

Dziękuję kochana! ❤ Jeden z vlogów musimy nagrać razem niedługo ❤

[@pirazyoko]

@@TheArtOfMetalsmithing UUUUUU, już odkurzam gimbala

[@anthonydobija3669]

Well still polishing this chandelier,and looking for things to make.i was thinking about door knockers made of brass.just looking for something a little differnt to do.figured you might be able to make some to.heading to ebay for ideas.

[@Mirathehermit]

great artblog, you got my subscription

[@TheArtOfMetalsmithing]

Thank you! That's so sweet, I appreciate it a lot ❤️

[@netcreativedesigns]

I always bring the water to a boil, transfer it to a bowl and put the plastic in immediately. Sometimes it takes a little bit to melt all the way but it does eventually go all clear. When you are removing your piece and want to store it for fuse, try to break it into pieces that are as small as you can get them so they heat easier

[@TheArtOfMetalsmithing]

Thank you for the tip! I appreciate it a lot :) Will try to follow these steps next time

[@cheri6785]

Your workshop looks like heaven! Really enjoyed watching your work and getting to see your process💞

[@TheArtOfMetalsmithing]

Thank you! I'm very happy to hear that, I'm always a bit reluctant and unsure if the things I share will be interesting for others, so I'm happy to hear that you enjoyed it :)

[@sylviahall5667]

Very very interesting I will watch more now I’ve found you bright blessings

[@TheArtOfMetalsmithing]

aww, thank you so much Sylvia! ❤

[@aumi.jewels]

I wished I was there to help you with the protoplast!!! But you were on the right track… you have a wonderful and beautiful day❤ big hugs 🤗, Michelle

[@TheArtOfMetalsmithing]

Ahh, thank you, Michelle!! Oh yes, it's true - sometimes having help from a friend can save so much time! I think what I did wrong here was letting the water cool off too much, that's why I had these white elements left in the protoplast. I think using boiling water would've been the best, just being careful not to get burned :)

[@aumi.jewels]

@@TheArtOfMetalsmithing I think that was the problem too… I make sure the protoplast stays in the hot water until it turns completely clear. Then take some tweezers or tongs and pull the protoplast from the hot water so you don’t burn your fingers. But still, I think you did a great job.🤗Michelle

[@debbierowe965]

Procrastinating when something new intimidates: this is a big problem! I felt like I was the only one!

[@TheArtOfMetalsmithing]

not at all! I think this is more common than we think. I'm definitely one of those people who struggle with procrastination when something seems difficult for me or that I won't be good at doing it haha :) You're definitely not alone in those feelings

[@youssefbensalh1534]

السلام عليكم ، حظ موفق .❤

[@createremake3864]

Great video ladies! Gosh can so much resonate with what you are saying! At the end of the day also I hope your KZbin channels get some revenue as well to compensate for lower than desired income from jewerly making. I watched a video by a few well known furniture artists and she was saying they came to the conclusion that donating furniture and focusing on creating great KZbin content works better for them rather than trying to make great sales of that refinished furniture. In Canada a single person needs to make at least cad$ 5-6K per month to be able to cover basic expenses and have some budget for developing business (or paying back loans). Min wage is $17-18/h, bread costs $5-9 per loaf, an average modest lunch out would cost at least cad$25-35, min $18-20, often without drinks and desert, it is crazy. The challenging part of jewelry making for me was that it took me time to figure out what I like designing, making and recreating and what is easier to sell, so through a few years I accumulated some supplies that do not match the collection. Might either sell or make some tutorials with them but since they are not the priority keep putting it off… Anyways, it would be fun to meet you both in person some day!

[@milagrospickling9656]

Nice video, Dear, as usual

[@TheArtOfMetalsmithing]

Thank you, I'm happy you enjoyed it!

[@PhoenixCreationsKaTyJs]

I love watching your channel, I’ve been making jewellery for 10 years, it’s something I can do even when my medical “crap” (sorry it’s one of those days and that covers it) is playing up. I’ve always wanted to do silver smithing but no space, can’t afford the tools and no outlet! I’m not a front room type I’m a back room type, u can make and create but business brain I don’t have sadly. I’ve tried etsy and local gumtree even but no luck, people want handmade for pennies not it’s worth round this area. So I enjoy watching you and your process. He he you just talked about intimidate yep I get intimidated easily lol! If all else fails and no clean containers I’ve used the lids of spray cans they make great cups! I love how you show the “how do I do this” process, like me when all else fails reach for utube 😊😊😊❤❤❤❤ id love to see you do a Phoenix sometime, your art skills are enviable 🥰🥰

[@TheArtOfMetalsmithing]

I'm so sorry your medical issues have been acting up :(( I hope you're feeling better now and able to rest and relax. I agree, silversmithing is quite pricey when it comes to tools, and it's hard to skip some of them. The business side of things - I completely understand you here! I'm the same. Although I do enjoy some parts of it, it is really tiring and difficult at times and I would prefer to jjst focus on making jewellery and videos and skip all of the marketing, admin, taxes, sales, customer service, social media and all that stuff haha Thank you for your kind words and encouragement, it means a lot! I'm very happy you've been enjoying my videos ❤❤❤

[@zoeb3871]

I have been thinking of getting into jewellery making recently as it looks like something I would really enjoy. I find it very hard to start leaning something new as I always doubt myself before I start, but your videos have inspired me to give it a go! Absolutely love your videos, they are so cosy and relaxing to watch. I was wondering if you have any tips or advice for someone looking into starting making jewellery as a hobby? :))

[@user-jf7oo7iz8c]

❤

[@maiguapa8]

I just love watching your videos and getting inspiration. I think the water needs to be very hot so the balls will melt. Also, can you make a video of how to flush setting and how to use the tools from Otto frei. I have it just a decoration 😂. Thanks so much for sharing your work. We surely appreciate you ❤

[@TheArtOfMetalsmithing]

Thank you so much! ❤ Oh yes, I totally agree. I think I let the water cool down too much haha >.< It should be very hot. I will share updates and progress of my work, and I will definitely make a whole dedicated video about flush setting and tools once I'm good at it :)) ❤

[@catherinemartina6469]

Oh My it looks like a butterfly

[@catherinemartina6469]

deepL also good translator

[@GingerNinja007]

You are an absolute gem and a joy to watch! Your video landed in my KZbin Recommended and I am so glad it did! I really enjoyed watching this video. What brand of tea are you drinking? I am looking for a new tea to drink as I have to give up coffee sadly, you made that tea sound so delicious I would like to see if I can find it here in Canada and give it a go. I am now your newest subscriber and I will be sure to come back and watch more of your videos.

[@TheArtOfMetalsmithing]

Oh wow, so happy you've found your way here! Glad KZbin has shown you my video 🥰❤️ I really love tea and I dring decaf one (as I can't really dring caffeine, so coffee is always decaf and so is the tea now too). I love Twinnings Earl Grey, both regular and decaf are delicious. I also love one by Sainsbury's, but I think it's only in the UK. Check if you have a Sencha Sakura tea available, it's a green tea, but more delicate and less bitter type, it's delicious too 🥰 I'm happy you enjoyed this vlog and I hope you'll also like the upcoming videos ❤️

[@GingerNinja007]

@@TheArtOfMetalsmithing Thank you for the reply. I will try out the Twinnings Earl Grey, we have it in Canada but sadly there are no Sainsbury's here. It is interesting you mentioned Sencha tea, I just bought some leaves from a small shop called All Things Tea in Belmont Village. I asked the store clerk for a delicate green tea and he recommended it. I will make a cup today and try it out!

[@anthonydobija3669]

Been polishing like a 100 peices of a chandelier over here.its like big jewelry.

[@TheArtOfMetalsmithing]

oh, my gosh. That's a lot of work!! 😆 I hope it went smoothly!

[@user-nv6ob5jt3m]

❤❤❤❤❤❤❤

[@tinmouse1083]

Invest in some stainless steel shot for your tumbler. Its worth the price, no rusting

[@TheArtOfMetalsmithing]

You're absolutely right, I'll get one soon 👍

[@yana_kaechka_mandalas]

I love the design with the cat and bottle❤❤❤❤did you made anything with that?

[@TheArtOfMetalsmithing]

thank you so much love! Hmm, I think I didn't! I should, shouldn't I :) I made another one, but not this one... will have to make it at some point too ❤

[@JustME-ft4di]

Another fabulous video! Can I ask you which gravers you think are most useful to but to start with? I’ve been looking at them online for months but have no idea which shape and size would be most useful. I am hoping to learn to flush set some small stones and make star bursts radiating out around them. Just got some protoplast myself as well. Perfect timing! 😀

[@TheArtOfMetalsmithing]

Thank you! So happy you enjoyed it :) Oh, with the gravers, I only just started using them, so I may not be able to answer that question yet. I struggled to choose too, so I know the feeling. In the end, I went with three shapes (I'm not entirely sure how to describe them), but one is sharp (like V), one is slightly rounded and one is more of a square shape. As for the sizes, I'm sorry, but I still don't have much idea - I think the ones I got were the most common ones. But as I'm nly just getting started with them, I will learn and then I will be able to share more :)

[@Lucy4n89]

Wow, that was amazing. Thanks for sharing Basia!

[@TheArtOfMetalsmithing]

Thank you so much! I'm very happy you enjoyed it ❤

[@Nataliawysockaa]

Chętnie obejrzałabym film o polerowaniu biżuteri np. od jakiego sprzętu zacząć itd. Coś w stylu kompendium wiedzy

[@TheArtOfMetalsmithing]

postaram się w przyszłości taki filmik zrobić, jak sama wypraktuję wszystkie kroki, na razie jeszcze nie czułam się w pełni na siłach, żeby zrobić przedwonik. Ale zaglądnij proszę co jakiś czas, bo ten filmik na pewno się pojawi ❤

[@marelisaromero4986]

You're so cute and talented ❤😊

[@TheArtOfMetalsmithing]

Thank you 🥰

[@BlooStorm1]

Thx so much for talking about Canva and the sources for your themes/shapes I have downloaded your files on Patreon, but frankly don’t know what the png extension means on the files. Also, can you recommend some ball vices that aren’t super pricey for a newbie? Thx so much. ALWAYS look forward to your videos!

[@TheArtOfMetalsmithing]

You're very welcome! Thank you :) The png extension is like jpg, but it offers better quality, it's usually used with graphics and digital images to retain the quality. But it's still an image you can use any way you like. As for the ball vice, it's very hard to find a cheap one. These tools are actually pricey. If they're super cheap, then it means there;s something wrong with them. I got mine from Vevor if I remember correctly. Their tools are of good quality, while an a cheaper side.

[@BlooStorm1]

@@TheArtOfMetalsmithing Thx so much for answering my Q’s!

[@user-sz6xe3xe4z]

😮

[@theselfmadecrafter]

Can i ask what the difference is between hard and soft solder? And which would you recommend for Sterling Silver rings? Also i am looking towards the solder paste would you recommend this for beginners?

[@TheArtOfMetalsmithing]

All silver solder can be used with silver, for rings a hard solder would be best. Usually, it's best to use hard solder in general, when there aren't many soler joints. But if there are, then you go through the hard, medium and easy solder to make sure the previous joints won't melt when you solder the next one. You start with hard and finish with easy solder. I hope it helps! 🙏

[@jadeheart911]

Where did you find that ball vice? And do you have a link so you can get credit for my purchase as a referal ? I have been shopping for one and that one you have looks perfect !

[@TheArtOfMetalsmithing]

Thank you, that's very sweet of you to ask about the referral link 🙏 I appreciate it a lot! I don't have a link for this ball vice, as I bought it several years ago, but I think it was on Ebay. I'm pretty sure that the brand is Vevor (I think they also have an Amazon store now and a website). After researching the ball vices, this one was within my budget (it's an expensive tool in general) and the brand is ok. I knew of their other tools, so I decided to give it a go. It's not ideal and it's very heavy, but it works!

[@jadeheart911]

Thank you!@@TheArtOfMetalsmithing

[@anthonydobija3669]

Kind of funny they have a woodpecker brass door knob.has a bird hanging from door

[@maryzylema9699]

You have so many gorgeous gemstones . You are quite a artist and your work is beautiful. 😊😍💖

[@user-tl5zo2in6w]

تمنيت لو ان المقطع كان مترجم الى اللغه العربيه

[@debterilli1380]

Do you draw out all those piercing designs, or do find them online?

[@TheArtOfMetalsmithing]

I talk about it and explain it all in the video...😆 03:45

[@debterilli1380]

@@TheArtOfMetalsmithing I wrote before I listened fully…thank you

[@svetlanakilyakova2346]

👍👍👍😉😉😉

[@catherinemartina6469]

was that a eucalyptus plant on your shelf

[@TheArtOfMetalsmithing]

I'm not sure :D Sorry, I'm not the best when it comes to plants haha

[@chrisp4962]

you are so sweet! Also doing my dream,

[@jeannettesalazar6442]

Is not easy, I am learning to saw and is so hard specially when I change direction.😢

[@TheArtOfMetalsmithing]

It takes time! So don't worry and go easy. Practice and focus on a smooth and steady movement, don't twist your frame when changing direction and making turns - make sure to slowly turn your metal while keeping the saw frame wertically in one position. Check out my video here, in which I share sawing tips to avoid breaking the blades: kzbin.info/www/bejne/iXqrp5-AZ8yrptksi=8w9VuoThE5RYkOzr

[@jeannettesalazar6442]

@@TheArtOfMetalsmithing thanks. You are my inspiration.