My Job As A Graduate Electronics Control Engineer: Quick Overview

In this video I give a quick overview of my new job as an Electronics Control Engineer for a hydraulics company in the UK. I'll be doing a more in depth look into the more geeky stuff I do soon like what software I use and what specific tasks I'm doing. Hope you enjoy!
_____________
Hi, I'm Hamed, I just graduated in Electronics & Electrical Engineering. I'm now working as a PLC Control Engineer.
My GitHub: github.com/had...
My website: www.hamed.engineer
If you have any questions you can email me at [e-mail] or just comment below.
Stuff You May Have Seen In My Videos
Oscilloscope £220: amzn.to/30AmFst
Elegoo Arduino Most Complete Kit £50: amzn.to/3qFHsoU
Elegoo Arduino Basic Kit £15: amzn.to/3qLipRK
Soldering Iron Station £30: amzn.to/3qHRWEm
Handheld Oscilloscope £50: amzn.to/3l76yMx
DIY Function Generator £9.99: amzn.to/30ynTEr
Lavolta Power Supply £60: amzn.to/3rHkFue
Eventek Power Supply £60: amzn.to/30DCrCO
You Can Also Find The Above For Cheaper On Banggood/Aliexpress

[@mateobalcorta9480]

This looks really neat! I was going down SWE route but can't stand staying in front of a computer all day. Really going to check out this career path as I just graduated with EE degree. Thanks for posting!

[@kdyke1993]

I think I’m I. Like an opposite position to you. I’m a test engineer in a hydraulics company. Previously I made test rigs for a pneumatics company. I’m interested in switching or at least increasing my knowledge in control systems to do more of that at my company. I’ve dabbled but nowhere near graduate level. How can I get to that level?

[@earlninoalajid8105]

what were the software applications were you using? im going to try to study them

[@HamedAdefuwa]

@@earlninoalajid8105 TIA Portal and EPLAN were the main ones. Plc programming and electrical drawings. Any alternative software would do as well

[@ItsNotAllRainbows_and_Unicorns]

Well, I do not know too much about control systems, but I'm willing to learn. And I do know that hydraulic systems contain hydraulic fluid. Their a special blend to also act as a preservative on the metal and o-rings, reduce boiling point and boil off, reduce flammability, etc. I used to work on aircraft hydraulics in the Naval Air. The other concepts you mentioned, valves, pumps, the hardware, I am very familiar with. I guess I just need to work on the controls side of things. I was thinking PLCs, or something similar. Background, mostly mathematics, with a heavy emphasis in ME courses, both BS and MS. Not sure what the best option is if I choose to go into PLC. I like robotics and machine vision. An are of interest is defect detection.

[@brandysara]

I love this channel. I also work within the field but im not finnished with my studies.

[@rrafik5086]

Congrats 👏 It's really motivating seeing your journey, thanks for sharing these great videos .

[@HamedAdefuwa]

thanks bro, comments like these motivate me to share more lol im loving it so far

[@Daviddiaz20013]

How is the pay? Thanks!!

[@HamedAdefuwa]

Started off terrible but just two years in it's brilliant, although I have been grinding so results may vary 😂

[@farhiaghiles1629]

Great video thank you for the insight, can you tell us what is the name of the software you used in the end of the video

[@Obzrve]

The company I use to work for work drawbridge. I did the electrical schematics. And layout of the panels. I also did all the wiring for the PLCs panels. Now I’m back in school for computer science.

[@HamedAdefuwa]

I think this will make a good combo, for a really good controls engineer

[@unc876]

This is brilliant, great job.

[@lucasvera2304]

I am identyfied with your situation!

[@Obzrve]

Thanks for sharing!

[@2hmedato136]

نفعك الله بما علمك و نفع بك

[@idioticmonkey]

نفعنا اللہ بکل شیئ

[@HamedAdefuwa]

امين جزاكم الله خير اخواني

[@engineeredappliancerepair2752]

Great video thanks for the upload and sharing your experience.

[@HamedAdefuwa]

Thanks for your nice comment. Just making one now on an engineering conference I just went to. 6 months have flown by.

[@lucylastik1887]

Well done and congratulations on your job - I'm sure you will be running the company in no time!

[@HamedAdefuwa]

God No! 🤣 I hope to be the geeky engineer that stays in engineering lol management seems horrible! Thanks Lucy 👍😊

[@1963knight]

congratulations on your new job

[@HamedAdefuwa]

thanks David, much appreciated

[@hrishikeshlohare6195]

Which city u r working in?

[@HamedAdefuwa]

I'm in Leeds

[@jordanb722]

Congrats man :). Surprised you finished uni so quickly, but I guess it's already been 1.5yrs since I last checked in on this channel :O. Time flies!

[@HamedAdefuwa]

Yo Jordan! Lol yeah I'm well happy I'm done! Been working 3 weeks now. Hopefully I get a lot more content out so you're back sooner next time 🤣

[@idioticmonkey]

Ay congrats man

[@HamedAdefuwa]

Thanks bro ❤️

[@idioticmonkey]

@@HamedAdefuwa ur welcom