My lawn tractor front end loader

My lawn tractor front end loader Thanks to other KZbin videos I was able to build a front end loader for myself. Some of the main components below
REAR Cylinder
2x16x1.125 Double Acting Hydraulic Cylinder Lion 661330 9-12282-216
Front Cylinder
Maxim, TC Tie-rod Cylinder, Max. PSI 2500, Bore Diameter 2 in, Stroke Length 10 in, Model# 218306
Controller
www.ebay.com/itm/154372481627
Hydraulic Directional Control Valve 2 Spool, 11GPM Double Acting Cylinder BSPP
Pump
NorTrac Bi-Rotational Hydraulic Pump, 6.3 GPM, 1/2in. Dia. Shaft, Model# CBS6-F6. 3SS

[@daverunion9044]

Thanks so much for your video on your diy fel. I just bought a '77 bolens lawn tractor (h14xl), which came with a 38" snow blower, and a 26" bulldozer blade. Both are hydraulic, and run via the hydrostatic trans. I have a bucket kit that is missing several pieces, but bcs of your video, I am in the process of making a front end loader very similar to yours. The exception is that I'm using 4 HD 300# electric actuators to lift the bucket, & perform the dumping function. Your information has been very very good, and has helped me with the frame building process. Thanks for the info and best wishes.

[@charlesoxley6503]

Thank you for this video it has very much helped me move forward with my project ,i very much appreciate your Information.👍

[@kimbeesley7937]

Glad it helped

[@Fjsbdjdh]

Very helpful, thankyou.

[@kimbeesley7937]

You're welcome!

[@swm1975]

I have always wanted to do this and it looks like you have done a fantastic job. What spec is the hydraulic pump and cylinders if you don’t mind.

[@kimbeesley7937]

No I don't. Lift 2" x 16" x 1.125" DA HYD CYL New. Double acting hydraulic cylinder. Lion model# 661330 SPECIFICATIONS Double Acting Bore x Stroke 2" x 16" Barrel Thickness 0.1875" Gland Retainer Tie Rod Pressure 2500 PSI max. Rod Dia. 1.125" Ports 3/8" NPT Retracted Length 26.25" bucket Model Number 218306 Type Double-Acting Bore x Stroke 2'' x 10'' Pressure 2500 PSI max. Rod Dia. 1-1/8'' Column Load 7850 lbs. Ports 3/8'' NPT Retracted Length 20-1/4'' Item# 47350 Brand NorTrac Manufacturer's Warranty 1 year Limited Warranty Ship Weight 6.0 lbs Product Type Pumps Max. PSI 2,500 GPM 6.3 Shaft Type Extended Shaft Diameter 1/2 Stage 1 Material Cast Iron Weight (lbs.) 6

[@boatbuilder1954]

Thank you very much for the specifications!😊

[@floydbarbour8406]

What type of metal tubing did you use on your bucket for hydraulic lines

[@kimbeesley7937]

Brake Line, 3/8" X 60" Steel from Del City. Rated at 3000 psi my pump is rated at 2500 psi

[@robertvasquez3964]

I like the loader. Can you tell me what size are hydrualic cylinders. If I wanted to buy some. How would I go about knowing how to order the right ones.

[@kimbeesley7937]

SPECIFICATIONS Double Acting Bore x Stroke 2" x 16" Barrel Thickness 0.1875" Gland Retainer Tie Rod Pressure 2500 PSI max. Rod Dia. 1.125" Ports 3/8" NPT Retracted Length 26.25" bucket Model Number 218306 Type Double-Acting Bore x Stroke 2'' x 10'' Pressure 2500 PSI max. Rod Dia. 1-1/8'' Column Load 7850 lbs. Ports 3/8'' NPT Retracted Length 20-1/4''

[@bobknight33]

2x2x3/16 and 2x4x1/8 inch stock.. What pump motor specs or model and same for the hydraulic cylinders and finally teh control box for up /down and bucket tilt up / down. This info would be nice

[@kimbeesley7937]

REAR Cylinder 2x16x1.125 Double Acting Hydraulic Cylinder Lion 661330 9-12282-216 Front Cylinder Maxim, TC Tie-rod Cylinder, Max. PSI 2500, Bore Diameter 2 in, Stroke Length 10 in, Model# 218306 Controller www.ebay.com/itm/154372481627 Hydraulic Directional Control Valve 2 Spool, 11GPM Double Acting Cylinder BSPP Pump NorTrac Bi-Rotational Hydraulic Pump, 6.3 GPM, 1/2in. Dia. Shaft, Model# CBS6-F6. 3SS

[@Jonny44]

This is very useful. I was wondering what cylinders and pump to use

[@jackrabbitjiro]

How big is the tank?

[@kimbeesley7937]

Hydraulic tank is one gallon. Fuel is original

[@lextheap1638]

What HP is the engine?

[@kimbeesley7937]

17

[@60Oldfart]

Using counter weight is one thing but your stamped frame was not design for that and could fail badly. I used a 3/8" X 2 " strap to fish plate mine from back to front.. kzbin.info/www/bejne/nHa8l2N7oL-bnq8

[@kimbeesley7937]

I later added a 1/4 thick channel inside the frame channel. I also but a 3/8 x 1 1/2 strap across rear differential to the frame bolts that attach the transaxle with added splines to support the axles. I broke the the original axle housing.

[@adinathzende3782]

This is Battry opreted??

[@kimbeesley7937]

No