Hey Everyone! I hope you enjoyed this video. I need to get use to these longer commentary type videos. The bottom line message of this video is if I can do it, you can do it! Now go build one and save the tractors!
@alrevels25104 жыл бұрын
Is it possible to build the loader and keep the mule drive to mow
@william380224 жыл бұрын
How much do you want for it?
@johnsayman22713 жыл бұрын
What pump are you using?
@tylorsplane729210 ай бұрын
Is it possible to ask you some questions through email? Would love to know more about the plans and a couple other questions about my cub 127 you might be able to help me with. Would be much appreciated! Let me know and love the whole build!
@willardjsullivan83947 ай бұрын
can the backhoe bucket be changed for a hydraulic auger for mini-excavator ?
@claire-d1eАй бұрын
Norman,I have watched this video many times, I have built the bucket on my 1975 cub 1250, plans were just do it, no plans used, all cylinders and pivots are greasable works like it should. And yes i did the 1 inch spindles. Like you said nothing has broke yet! I bought the backhoe plans from PF engineering, that will be this winters project, once i get started i dont want to stop building it. Thanks for the encouragement! I think i speak for most! Take care and thank you! Keep up the good videos!
@ThePadutch4 жыл бұрын
Anyone who tells you they could dig these holes faster with a shovel has obviously never dug a hole with a shovel! lol Awesome build and video Norman. Thank you.
@bullithedjames9373 жыл бұрын
Amen to that.
@michwoz3 жыл бұрын
Yep. It won't be faster and you'll be messed up afterwards ;)
@williambarnhartblacksmith4143 жыл бұрын
And even if it were faster, the manual effort is what makes a difference for many folks!
@RaspyOB1742 жыл бұрын
Seriously. Hand dug a trench through wet clay and this would've made quick work of the job. Go ahead. Dig it yourself. So cool. Huge supporter of engineering plans. Thanks
@MountainBeekeeper Жыл бұрын
I hand dug a couple of 5 feet deep for 12 inch sonotube at 3300 ft elevation, lots of clay and big rocks. I can tell you for each hole I spend a day working hard, and I wish to be that lucky to had a machine like yours. I'm sure that with your machine I could finish each hole in one maybe 2 hours and save my back. You are doing a great job, sir.
@johnpyle80274 жыл бұрын
I bought a JD 430 last fall that I restored. It has the Yanmar Diesel with front and rear 1" axles. I bought the plans from PF, a Lincoln Mig 180, 220-240. I just finished a fab table TODAY! I have an angle grinder and drill press and I will buy a chop saw. I haven't welded in 36 years and that was stick welding. I've watched most of your videos and it gave me the confidence.
@dustyphillips31664 жыл бұрын
Make sure you get a good quality chop saw. I bought what I thought was an affordable name brand one, and it cuts like crap. Now I'm looking into spending more on a horizontal band saw. The chop saws are just ridiculously loud and I'm not pressed for time.
@timothykeith13674 жыл бұрын
Yanmar makes great motors
@johnpyle80274 жыл бұрын
@@dustyphillips3166 I bought an Evolution Chop Saw and an Evolution Circular saw. They both had great reviews. I thought about swapping the blades in saws I already have but was afraid of the high RPM. The Chop saw is never square and I have adjusted, tightened, put a flat piece of 1/8 plate on the table, held a square up to them and it's perfect but every time it's a little off. Using the circular saw I have to wear my apron and welding jacket, gloves welding helmet set to grind or I may get sliced to death! That thing throw chips like a chainsaw. Just last night I watched some guys from Diablo (I have all their wood blades and steel for recip saw). They used a Makita cordless and cut rail! The guy had on a T Shirt and safety glasses. I completed my first project, which was a snow plow that I fabbed everything but the blade. A ban saw may be the answer. I cant work like that, i'll get hurt!
@johnpyle80274 жыл бұрын
@@timothykeith1367 I cut down 6 trees last week that were probably 8-9 inches at the base and that tractor drug them up to my burn pile to limb separate cut and stack without hardly a grunt! . They were in a tree line so pretty tall no huge canopies. maybe 1500 lbs. I love it!
@theproudONE924 жыл бұрын
Make some videos keep us updated on your build
@freddirkse3 жыл бұрын
Thanks Norman, I appreciate the kick to "just get it done". I have Paul's plans from PF engineering and it's easy to get lost in the planning, tools, second-guessing, etc. I'm just doing to get it done!
@kennolte58014 жыл бұрын
I watched the series of you building the backhoe. You did it with tools that many guys have already in their garages. It was a great series of videos. Thanks for the update a few years down the road. The success of your build is evidenced by it still being in use. Saving these old overworked and under maintained is a great thing. Thanks.
@danielprivate74424 жыл бұрын
Cub Cadet 149....searching...searching...searching. I check Craigslist everyday for this ad "Cub Cadet 149/169. Doesn't start. $300." So few people that have them ever part with them....and when they do, most people are aware of what they have and are asking a lot for them. What you did with yours is fantastic. The series was a lot of fun to watch. Keep posting Norman. Love your videos.
@Isavetractors4 жыл бұрын
I have noticed lately too not a lot of tractors for sale on FB or craigslist. Keep looking it will happen
@danielprivate74424 жыл бұрын
Recently I saw a very nice 1450 Quietline for sale, $2000. Except I don't want to spend 2k on a nice Cub, I want to spend $300-$400 on one that needs to be saved. At which point I'll no doubt be sending some business your way.
@ferrita764 жыл бұрын
Hi from Spain, Norm! Please write down I'm your first and biggest spanish fan. I've been following your channel for years. It gets me so sad when I see the low number of subscribers of your channel! Yours is one of the best DIY channels all over youtube. There are lots of channels with crap or stolen content with millions of subscribers and it's unfair. Your channel has very high quality, original and useful content. It's a pity that here in Spain that kind of small tractors never existed. Of course we, your viewers, love your restoration videos, but these ones, talking about nice things like DIY and tractors, are also great and welcome. Please keep doing them!
@BA_X7284 жыл бұрын
Norman, the work and detail you do in your projects is amazing.. I enjoy welding and fabrication projects myself . Not quite to that extent. I agree you don’t need the best products to complete the job. I have a x728 John Deere tractor and done many projects with it.
@normhowes29754 жыл бұрын
I built the micro backhoe last year after having watched your build. I based mine on a 1973 MTD with a 16 HP B&S and a mid mount PTO. It's light in the front end and I still need to change the pump drive pulley to a double as it slips with a single. I have a blast using it.
@CzechSixTv2 жыл бұрын
On the choice of welders, it's best to ignore forums. Of course there are pro welders on them that indeed do precision work for a living but for the most part it's just people showing off their expensive toys and pretty welds. Almost none of them have ever been on their back in the dirt doing overhead welding. I'm a former diesel/heavy equipment mechanic and used an ancient Lincoln SAM 400 on site or a vintage 440v Hobart in the shop for years. When you're constantly fixing buckets and blades it is hard to beat a good old fashion high powered stick welder. I currently have a Lincoln 'Tombstone' in my home garage that isn't near as powerful as what I had at work but still welds 1/4" material with ease. I paid a whole $200 for it at a yard sale(plus $100 for new leads). At 17:30 you appear to be cleaning the steel with brake cleaner prior to welding. DO. NOT. DO. THAT. Chlorinated brake cleaner and welding don't mix. MIG or TIG welding with argon gas in particular, combined with brake cleaner, can produce phosgene gas. Inhaling even a tiny amount will send you to the hospital and cause permanent lung damage. There are non-chlorinated brake cleaners but it's better to just stick to wiping with acetone because even when FCAW or stick welding the heat alone can vaporize any remaining chlorine which is bad for you as well. Lastly, on the subject of the build, thanks for going into such detail of the PF Engineering plans. There are a lot of timelapse and completed build videos, but not much in depth of the actual process. I'm looking to modify their micro-hoe plans into a tow behind unit(my UTV can go places my tractor simply can't) and your videos helped determine if the plans are worth the price.
@choppermike51624 жыл бұрын
Excellent video! My Dad and I built a loader using PF Engineering plans for a Case 446 many years ago. Love the loader and if performs very well. Only drawback I have is the lack of power steering which I pan to remedy later on this summer.
@harrysmith5244 ай бұрын
I am glad to see you have new stuff to show us
@arthurmandel65414 жыл бұрын
Great build glad to see it is still going strong, very informative video, thanks.
@p.f.engineering95084 жыл бұрын
nice video Norman! there is nothing better than building something yourself and being able to use it on your property. it's good to see those implements still going strong, i've been using the ones i built 22 years ago and they are still doing great, in fact i swapped the loader and micro hoe i originally had on the cub cadet onto a 1986 Ford model 1110 compact diesel 4WD tractor 1500 lbs, widened out the loader bucket to 54" and can lift about 1000 lbs with it. the onboard hydraulics on that tractor put out 4.15 GPM at 1750 psi and run the loader and backhoe no problem. keep up the good work! ~ Paul @ P.F. Engineering
@kentowakai1234 Жыл бұрын
I wish I had soil like that. Lake Missoula left lots of gifts for me: boulders that weigh as much as a VW. Sweet build.
@jason-white4 жыл бұрын
I always love seeing this machine run. I can watch it dig and then fill in holes all day long lol This machine is the reason I subscribed for ever ago.
@1978garfield9 ай бұрын
I am very impressed you did this with a 110 Volt flux core welder. I started with a 110 Volt Harbor Freight flux core welder, upgraded to a 110 Volt Mig welder and now have a 220 Volt Mig welder. The HF welder was 70 Amps and was hot all the time. The 110 V mig welder was OK but did not have the sticker in the door telling you what amperage and wire feed to use for each thickness of metal. It also sped the wire up as you increased the amps. It had 7 amps settings. I managed t get an Amazon return 220 Volt Mig/ Stick/ Tig (if you buy the leads) welder. I find it so much easier to use. Liked and subscribbled for Al Gore's Rhythm.
@dustyphillips31664 жыл бұрын
Love your positive attitude. I can hear you smile while you're talking.
@dadmezz40243 жыл бұрын
Very nice project! You are spot on to diy because you get all the tools and learn a lot to improve yourself. Thanks for sharing your hard work.
@SilverRaven1959 Жыл бұрын
Norm, thank you so much for these video's. I've watched this one 3 times. I bought the drawings from PF Engineering, started buying metal and looking at my build list. Anything on sale would be my first purchases. Starting the build in about a month. I live on Northern Ontario Canada and really need this on my property. I built a saw mill last year and doing this now. Last year I found an LA165 JD that's going to be a Dozzer and my Ford LGT145 will be by loader back hoe.
@raymonroe1983 Жыл бұрын
Just found your channel today. My Dad watches it and told me about these plans. Very nice build and video.
@davidherr9635 Жыл бұрын
You inspired me to build one. I Finished it in 2019 it has been a awesome Machine
@genesloan31754 жыл бұрын
Norman, I really appreciate this talk and explaining the real tools. I have a Bolens HT-23 that I'm strongly considering doing! This video is exactly what I needed to see. Oh, and your personal chat on the phone about converting #16 Kohler carb for my S-8D engine... Went to order it and it wasn't available... No problem. I luck up on a TR-10D, which turned out to be a Interchangeable engine that Wisconsin began selling as replacement engines for almost any industry. Mine came with a rare extended front crankshaft. It also was solid state ignition with a Wico Magneto under the flywheel ..... Working with it on a Bolens 1000 ....
@jakeolsen27644 жыл бұрын
Really like this. I have a 1971 john deere with the loader and backhoe that i did'nt build but know and bought it from the guy who did. I also have a 1970 ih cub cadet 105 with mower and tiller on the back along with several other tractors. Great videos and thank you. I dont do the facebook so this is where i get to see them.
@Rusty_Nickle5 ай бұрын
I agree. I have done more wrenching with cheap harbor freight tool set and probably the cheapest welder you can find out Amazon then most of these guys preaching about the expensive brands have ever done. I know I'm late to the party but this was an awesome build to watch. All it takes to start a project is a little bit of know-how. The knowledge and skill comes with time.
@stevescuba19785 ай бұрын
I've been a tradesman in machining, mechanics, electrical, and plumbing. Some tools need to be beefy, industrial quality....most do not. I have done engine swaps with a $40 harbor freight socket set and a few extra hand tools, and I have many thousands of dollars worth of high-end tools
@P.Trim69Ай бұрын
Great video and shout out to Paul. Good name lol on the plan man .
@tomsanders94913 жыл бұрын
Thanks for the resource of P.F. Engineering. I want to do the same build for my 1994 Deere 332. As for the holes, I use my earthquake 2 man hole auger
@beunbad3 жыл бұрын
PF Engineering is aweso,e, he always answers every email no matter how many questions I send him!
@andrewfuller84403 жыл бұрын
Great work Norman. I was inspired by you and built one for my 16 hp Gilson/ Montgomery ward tractor.
@Isavetractors3 жыл бұрын
Awesome! I'm so glad to hear! I love seeing photos! Info@isavetractors.com
@resqdiver14 жыл бұрын
I built a PF Engineering FEL for my Wheelhorse about 10 years ago. It’s a beast. It moves my 750lb welder with very little effort. Best advice I can give is to find a used Zamboni blade for the cutting edge. Beautiful work on the Custom Cub!
@timothykeith13674 жыл бұрын
I got the PF Engineering plans too, but I haven't used them.
@ambrosemackinnon83142 жыл бұрын
U made that backhoe it serves u perfect u have the satisfaction of knowing u built it ur self ...never mind the haters they re always jealous really enjoyed ur video make more.
@Maketrainsgreatagain4 жыл бұрын
This remains my favorite thing in the tractor world
@hamrobert14694 жыл бұрын
Awesome video Norman, There is many opinions out here on the web. Many that think they know the only or best way to accomplish something. Your approach to making or doing a project probably gives more people the encouragement needed to at least try with what they have on hand. I believe it helps people realize they don't need anything fancy. Keep up the great video's that I believe help others. God bless you and your family much. Have a wonderful 2020 summer season.
@jackedwards59854 жыл бұрын
Big fan Norman!
@asus123514 жыл бұрын
Nice vid Norman can't wait for your next restoration.
@therealjorge99972 жыл бұрын
Great Job!! And I love your attitude about using inexpensive tools. Thank you
@ryy5974 жыл бұрын
i absolutely agree with you! i have always been told that only the professionals with professionals tools could accomplish certain tasks but thats a complete lie. when i started working on small engine i bought cheap tools to get me started and im still using these tools to this date!
@desertfun4all6504 жыл бұрын
Awesome video Norman. I just got my loader and backhoe plans. Now to buy the materials.
@mossyoakshomestead88852 жыл бұрын
Good stuff Young Man, Keep at it, you Sir are a great contribution to what is left of what KZbin use to be. Thank you for your valuable time and effort.
@TheTorkerman4 жыл бұрын
This is a great format Norman, very helpful. I think it’s time for a 2020 loader build !!!!
@flaircraft2 жыл бұрын
2:24 So you're saying you really wanted a Bolens? :) It's cool that you were able to make a hydrostat foot control for your Cub, a lot of people really prefer foot control to hand control, especially for something with a loader. And at least yours is a hydro trans, my GT18 has a manual transmission...
@tomgluth42544 жыл бұрын
Excellent video! And please, keep up these commentary additions to your videos as they are extremely helpful and interesting.! Thanks again Norman.
@dingui8754 жыл бұрын
Super génial !!! Toujours aussi cool de regarder!!!
@Paiadakine4 жыл бұрын
Very nice. My brother is a hydraulics engineer. He does this stuff for a living. Me I have no use for a tractor but I would sure love to build one like this and just dig holes in someone’s yard.
@michaelbenoit2484 жыл бұрын
Hey @isavetractors, on our property down here in Texas we don't dig them up, we burn them, way easier & more effective. other than that, nice build! The cub cadet tractor really fits nicely with the loader/backhoe. I like the all yellow theme on it.
@timothykeith13674 жыл бұрын
Yes, easier to burn them. I found that I can break up huge rocks with a feather and wedge set. You might need a generator set. Use an SDS drill and a hammer - I'm in Texas hill country. Previously I'd dig out rocks for days. Now, within an hour, a piano size rock can be broken up.
@rogerbegin34772 жыл бұрын
Beautiful job
@SHAD0WZOMBIE11 ай бұрын
Not trynna be "Macho" or anything but i dig for a living everyday.. big holes... long holes... footers.. and i walk just fine. Love the tractor! Just built a root rake / box blade for my husq and considering building an excavator for it.
@crazyDIYguy2 жыл бұрын
You can get deeper penetration on the flux core if you pre-heat with a propane torch, etc. On the thicker stuff I used to do that before I got a bigger welder.👍
@robertjordan90754 жыл бұрын
Thanks for sharing and being honest about your work. That’s why I watch your videos and tell others about you. Keep up the good work.😎👍🏽👍🏽👍🏽
@robertwright18184 жыл бұрын
Your right I dont need them big dollar tool ether I have a shop at home like u an I get it done 2 .I'm a big fan an really like the message u bring really cool an very nice work I think. 1 - 4 the lil guy win win . Thanks 4 the video very well done.
@martinadams60672 жыл бұрын
I am very impressed. Nice video and great bulit
@stevescuba19785 ай бұрын
I know this is old, but bro, go back to HF and get you several magnet squares for welding mockup. It will greatly help with aligning, holding, and squaring up your assemblies for tacking together
@codydunn2424 жыл бұрын
I got a 70s cub like this and a 80s cub that I am trying to get running again and a 70s ford 145, the ford had been rebuilt but now the stator and regular went bad so trying to scorce thoes parts so it will charge while it is running. The ford has a front blade, 50 inch deck, one bottom plow, disc, and calla packer. Love the ford and have had it for 17 years I believe.
@dominique48224 жыл бұрын
Salut Norman, Thanks thanks thanks, c'est tout à fait la vidéo dont je rêvais. J'ai presque tous le matériel pour me lancer. Trop bien 👍👍👍
@ironleatherwood13574 жыл бұрын
Great video Norman! Know that there crazy, what a great line. David from Tennessee here.
@brianbloom17993 жыл бұрын
I got to give you thumbs up, flux core first time welding great job, I built a bulldozer with flux core , For a young man Great job.
@Lovinflyindrones20223 жыл бұрын
Just found your channel. Interesting. I enjoyed. Thanks
@GaryT19524 жыл бұрын
Really interesting Norman...excellent format
@RaspyOB1742 жыл бұрын
Only thing I didn't understand was sauna tubes. Clearly a self researcher but left this here for the masses. Thanks again
@Isavetractors2 жыл бұрын
sonotubes
@craigbennett10253 жыл бұрын
I just watched your video you done a excellent job on that tractor
@wadealan70854 жыл бұрын
Nice work! I would love to have one of those.
@paulg4444 жыл бұрын
Great video. Biggest take away for me, the hard part is getting all the pieces jigged up.
@vincescalise48214 жыл бұрын
That is a beautiful beautiful job, that you did, thanks for the video
@davidprins94012 жыл бұрын
Thanks so much for this - I’ve wondered about that set up too
@brianphilbrook52624 жыл бұрын
Yep still my favorite
@stevevogelman33603 жыл бұрын
Nice job
@johnkutzak72393 жыл бұрын
very nice job
@guyina4x4994 жыл бұрын
I built my loader with a 240 volt harbor freight welder with flux core wire. And a champion 5kw generator. Fact is a lot of heavy equipment is welded with flux core wire right at the factory.
@keithbuck16683 жыл бұрын
Solid work. How much was the parts cost between the raw steel and all hydraulic components?
@brosselot14 жыл бұрын
Very cool. I've got a 314 hydro wheelhorse tractor I would like to but a loader and backhoe on it.
@drivingmylifeaway71494 жыл бұрын
Same tractor and goals! Love the 314s! Mine has 1,300 hours!
@alan01664 жыл бұрын
Hi Norman, thank you for the video of your build! Do you have more info regarding the conversion from the hand operated hydrostatic control to foot pedal control?
@Isavetractors4 жыл бұрын
I sure do. I have a video on the conversion. It's in the TLB playlist on my channel
@gohunter24 жыл бұрын
Awesome Job !
@Jackdelfranco683 жыл бұрын
Well done, thanks for sharing.
@msack69044 жыл бұрын
I enjoy your videos, with 3 acres I so need a FEL and a backhoe would be great. I have a bunch of landscaping jobs around the house that a BH would make short work of. Maybe someday I'll build a set for my Massey MF1855.
@scottfoster24874 жыл бұрын
Need a thumb and a quick change for the bucket and this will be a more versatile machine. Good points on basic tools.
@jacobsaltzman13373 ай бұрын
Epic build dude!!! Did you use the drill press to hollow out the spindles?? WOW!
@Isavetractors3 ай бұрын
I had a machine shop with a lathe do that for me.
@BushImports4 жыл бұрын
You did a nice job on that. I wonder if a John Deere RX75 is too light for those to work as attachments. They would have to both be used on the front since the motor is in the rear, it would be difficult to operate anything on the rear. Your tractor initially looked a lot like a Sears garden tractor we used to have. Thanks man
@metalworksmachineshop2 жыл бұрын
cool build. I'm going to put a front loader on a cub 100 , just scanning KZbin for videos. Id like to see more detail on your pump system. I know yours is live. but I want to use the pto clutch. the 100 isn't a hydro tractor as you prob know.
@blairguinea13374 жыл бұрын
Great job Norman love ya style Sir
@aarongore92746 ай бұрын
I built the same fel/backhoe, but from a cub cadet 129. The 12hp kohler k301a is no slouch. It did everything i asked of it. You don't have to have a 149 or 169.
@PurpleCollarLife3 жыл бұрын
Do you know of a way to put an hour meter on these old Cubs?
@Isavetractors3 жыл бұрын
Just wire it to your Ignition terminal on your coil or key switch. So anytime the key is in run the meter gets power
@RYM14 Жыл бұрын
I know I’m a little late but you could put a thumb on the back bucket for logs and brush!
@Isavetractors Жыл бұрын
Heck Yea! I will in the future. I am thinking of putting a grapple on the loader.
@Slisktord3 жыл бұрын
I love this build!! I'm very new to hydraulics. How do you control the two cylinders for the front loader at the same time?
@Isavetractors3 жыл бұрын
I pull two levers at once
@Slisktord3 жыл бұрын
@@Isavetractors oh it's that easy.. hehe well okey! I thought you had to synchronize the two cylinders somehow. Are they just connected as two individual units then? Thanks for the reply!
@Isavetractors3 жыл бұрын
Yes the control valve controls 2 circuits and each circuit is plumbed into both cylinders on each function. So one lever sends oil to both lift cylinders and the other lever sends oil to both curl cylinders. To lift and dump at the same time just work the two levers at once.
@Slisktord3 жыл бұрын
@@Isavetractors ohh well I only meant how are the left and right lift cylinders connected together, is that function on only one lever? If so, is there something that balances the pressure between the two?
@jorgeposadas11924 жыл бұрын
Cool video big guy.
@Richjk8415 күн бұрын
Try running the Flux core uphill ,it is a lot stronger.
@christianvandonselaar54113 жыл бұрын
The only reason that I need Snap on is being of my day job being a technician so buy one and done and use the hell out of those warranties haha but my secret favorite is still harbor freight
@TerrellWillams Жыл бұрын
Sweet!
@josem.29094 жыл бұрын
Just uploaded and the video have one like already!! 😲!! Cool
@trucks_n_tractors_63354 жыл бұрын
Does Isavetractors have points and condenser parts for a 16hp cast iron Briggs?
@Isavetractors4 жыл бұрын
Yes we do.
@moparman01884 жыл бұрын
I have a house well stick wielder 115 volts 75 amp out put and I’ve wielded the frame of my cub back together and it held just fine I only paid $110 for it and I’ve had it for almost a year and it’s done a lot for me
@freakinownedАй бұрын
I would love to know how you plummed in a hydraulic filter into your loader. I have a gardening tractor with a loader and I need to plumb in a hydraulic filter.
@michaelsnell40344 жыл бұрын
I wonder if it would be more helpful to have the backhoe bucket be longer toward the teeth so you can dig more straight down the end of a trench.
@stevetakacs8493 ай бұрын
I did the same thing with a Snapper 1650
@tanello23 жыл бұрын
this makes me want to build one even tho i dont need one
@woodrowcaudle2 жыл бұрын
What wattage generator did you use with your welder? I bought an older house up here in Northern Maine and every time I try to run my welder circuit breakers start tripping. So.....right now , no welding.
@eddiebowens1919 Жыл бұрын
I love it, Great job. I have an LGT18H Ford I would like to do this too. Do you think it would hold up to the load?
@Isavetractors Жыл бұрын
I don't think the LGT18H could handle this long term.
@eddiebowens1919 Жыл бұрын
@@Isavetractors The frame will need to be beefed up. The Trans. is an Eaton Pearless, it can handle a lot.
@MustangsTrainsMowers4 жыл бұрын
If I had a welder and the money for parts I’d build a loader for my Toro 522xi attached to the frame under the footrests and in the front to the 4 bolt holes where the front bumper attaches so it could be used along with the mower deck. A custom mule drive would have to be made.
@phillipyoung3250 Жыл бұрын
Do you think there is a market for a smaller than subcompact lower cost garden tractor like your custom cub cadet? Ever since I was a child I wanted to build things and I’ve been hoarding tools since I was a teen. I’ve got all the tools and shop space to build something like this and I’m confident I could get it exactly right my second try. I currently install communications infrastructure but I’m looking to switch professions to something where I can just be at home with my tools and maybe sell a couple of custom tractors every month? I really admire your attitude and abilities
@Isavetractors Жыл бұрын
Yes I do think there is a market for it. Good luck in your endeavors!
@DancingCrittersAcres4 жыл бұрын
Hi Norman. I am wondering if the plans you purchased is a one size fit all or are they specced different for the other types of garden tractors? Maybe the frame widths are the same? I've got a Toro Wheel Horse 418A, that I would like to put a front end loader on. Many thanks for sharing. You take care. Dean
@johndeeregarage53394 жыл бұрын
Hey Norman I have a question I have a kholer series 2 twin pack 17 that needs a rebuild does isavetractors supply parts for it? Great video!
@Isavetractors4 жыл бұрын
Yes we do!
@johndeeregarage53394 жыл бұрын
isavetractors awesome here I was thinking I’d have to find a new engine for it 😂