My Little HACK for Better Braking with Fanatec ClubSport V3

[@garlic11187]

one important think to add here: if u use a fanatec wheelbase, turn the BRF OFF! if u have it set to 50% or even higher the amount of pressure you apply gets boosted and this feels very strange. because than the car brakes 100% although u just press at half pressure possible at your brake. i turned this BRF setting to 0% and the difference was so much better!

[@michaellivingston8015]

What's BRF? Just got my first wheel base and pedals

[@markussammer4910]

Breakforce in the Tuning Menu

[@byMariusz]

Is that a thing? I have read many people saying that a higher BRF worked better for them.

[@ienupar2003]

@@byMariusz It's all about what works for you. I run BRF at 40%. Tried loads of other combinations and this one makes ME being most consistent on the brakes.

[@plorwax]

Just tried this now and I realized i been missing out. Trail braking and modulation is so much better now after re calibration and tuning. Thank you!

[@azzazz4549]

What preload position did you choose . . .

[@nanoverse]

Gamer Muscle did this too. Have to try it probably with softest polyurethane. Few tips I have. Before installing to plate insert usb-cable for firmware updates. You can’t get it in on rig. Turn the part around that has the brake retaining screw. Again when on rig you can’t get it out otherwise. Now just unscrew motor from above and you can access the screw and mess with the insert hardness. Lower the gas throttle throw with screwing the rod in. I like the black spring more. Oh and don’t bother with damper kit it makes braking and gas worse.

[@kennyreyes6708]

Best GT7 channel!

[@Dung_Beetle1617]

Just bought V3s on Black Friday so very glad you made this video last year!

[@Khans0120]

How's the wait period for you going? It's been 2 weeks for me since they set the V3 order status as fully shipped yet I have not received any email regarding the order as far as tracking goes. However, I ordered it when the product page indicated that it was in stock.

[@moncimoov]

same, 25nov never arrived😢

[@darrenhnidka1168]

Got mine yesterday🎉 Ordered 24th

[@moncimoov]

@@darrenhnidka1168 USA ?

[@Dung_Beetle1617]

Got mine yesterday. Though UPS are horrific. I’ve got another Fanatec order at a collection point that I can’t collect because they won’t give me a code. The irony!

[@hellomihai]

pls don't forget to set the BRF (frake force) in fanalab or fanatec software or on the fanatec wheel settings (same setting)

[@simracerjoe]

Amazing! I’m glad you took my advice ;) excellent content bro

[@daddictionmusic]

Great content as always… So you still use that hack of two greens and one third of another green elastometer ? Or did you find it to hard and combine a red piece instead of a green ?

[@DigitRacingDG]

I got back to the recommended setup from Fanatec now. I spent a lot of time trying to get the best feeling, so if you can, try both.

[@daddictionmusic]

@@DigitRacingDG so yellow red green ? Thank you m8

[@DigitRacingDG]

@@daddictionmusic yes

[@TSXChef]

This video is so good, still coming back to it. For me, Digit inspired me to try this less than a year ago (cut rubber instead of using foam, 13Red cut for me). Then last week when I was maintenancing the pedal, I decided to go back as Digit recently suggested (Foam+13R+12G). However, after a week, I went back to cut rubber instead of the foam. The foam gives me too much of a separation feel, very spongy short press followed by harder rubber feel. I went back to 13R cut + 13R + 13R (I own 2 BPKs), which gives me a very linear press feel. I'm nowhere near Digit's pace, but this works best for me. Everyone is different so there's no magic fixed setting, but thought I share. Cheers.

[@last_lsa1793]

Good info thanks man

[@Steve19105]

I changed to that long ago, but it locks up the brakes for me, so I installed 2 greens, but with the white elastomer supplied as directed. Firm pedal, less lock up. Interesting the gap you left. Why did you not cut it longer?

[@DigitRacingDG]

I tried it longer but this got me the feeling I was looking for. It's really personal preference tbh

[@popino7971]

Ciao e grazie per la condivisione , ho una domanda da farti visto che usiamo lo stesso volante, fanatec gt , che impostazioni usi sia con software fanatec , e che impostazioni hai sulla ps5 , grazie

[@martexl]

I've done this mod to my pedals but I've found the rubber is creaking when I press the pedal, any ideas why? I only put thin film of grease on so maybe I need to smother it.

[@B1G_UN1T]

Great vid, thanks :)

[@german72079]

@DigitGaming Does the vibration function with GT7?

[@notdreadyet33]

So the hack was installing the brake performance kit. ?

[@DigitRacingDG]

Kind of, I cut the part of the rubber to get myself more travel

[@notdreadyet33]

@@DigitRacingDG Thank you. I think I've gone the opposite, my Preload is maxed out. My particular problem is ACC vs every other sim. ACC requires about half the pressure needed vs iRacing, for instance. That's because in ACC, you have to be at 100% brake pressure for extended periods of time. With that, I want less travel.

[@SSRT_JubyDuby8742]

Like deployed 👍

[@marcelocamacho6641]

hey digit! try the black spring for your throtle, this red one is too soft!

[@shorty808100]

You can also adjust the throw on the throttle and change the tension on the spring if you know how I’m grabbing a hydraulic piston for my gas pedal my black spring is starting to wear

[@Zascar_88]

@@shorty808100 try the damper on the throttle it helps....

[@ThexGreatxLTS]

Your hack is a product they sell for this literal reason?

[@DigitRacingDG]

Well no, they don't recommend cutting the rubber in half to fill the space