My N52 Exploded (N54 Swap?)

[@RaimundN52]

Join membership(Private Q&A Discord) m.kzbin.info_channel/UCBspnwRZifBVXbAVZCHaZ4w?noapp=1 Full build parts list: Https://bavautoparts.com/blogs/builds/e90-330i-time-attack-build N52 + N51 Upgrades: bavautoparts.com/blogs/news/22rpd-n52-n51-upgrades

[@freehands1]

It may be a bit pricey, but the ZF 8hp out of newer BMW’s could be a potential candidate. SLG House of Speed has adaptor plates for N54’s. I’ve been very interested to see it applied to an n52. Either way, good luck and awesome content.🤙🏼

[@RaimundN52]

That would definitely be the best option performance wise. The F series that came with an N52 actually got a ZF8 from the factory, pretty cool but only for a short time. Thank you watching 🙂

[@donchristensen8200]

Some serious BMW geek speak going on around here. Brilliant, Ray!

[@bimmerbryan]

Very interested on how this swap goes, lots of great content Rai!

[@RaimundN52]

Thanks you! Just to clarify, I was kidding about the N54 swap, it'll be getting another N52 (best engine)

[@colorado.e9x]

Great job on the NA N54 conversion. I've done it myself and can safely say you really feel a real difference in the buttocks. My friends have since started calling me "zesty" and "fruity" which must be a good thing. Seems to be a food reference. Who doesn't love food?

[@RaimundN52]

Thank you mister zesty fruit 🙏 i love food

[@coliimusic]

✨️zesty✨️

[@Mp-jw1qg]

if you n54 swap it, just get the maxxecu with the plug and play harness, go dedicated port injection, its cheaper to do all of this than it is to buy new index 12's.

[@RaimundN52]

Great point. Definitely would be a good option as I don't like the n54 DI system. At this point I'm keeping the n52

[@Mp-jw1qg]

@@RaimundN52 yeah, mines wet sleeved n54 block, n53 head and m50 3.5l stroker rotating assembly (bc stroker crank from older bmws fit the n54 by chance). maxxecu and 0 problems with the engine. drives better than stock lol

[@Mp-jw1qg]

@@RaimundN52 ive got a complete n54 engine with spun rod bearing you can have for free if you arrange transport. engine is fine just needs bearings and machien work. come yank it out of the e60 in my garage so i can stuff this ls3 in there. it would be pretty cool to see a high compression supercharged n54, as factory the n54 was designed for low rpm torque.

[@alexj.9268]

5:41 both Left and Right brake disks on the wrong side, the vents are spinning in the wrong direction.

[@RaimundN52]

Thank you for your comment. The manufacturer specified the brake rotors to have the inner vanes sweeping towards the back of the car, which is how I installed them.

[@alexj.9268]

Translation errors happen all the time, what I think may be most helpful for your understanding is every single fan of this type has vanes always sweeping against the direction of flow. This type of rotor fan is commonly called a "Squirrel Cage Fan". There are millions of squirrel cage fans all over the world in home furnaces, and in a multitude of electronic devices, computers, etc.... All of them have vanes angled against the rotation direction. This is just how airflow works. No need to argue about who is right and who is wrong. Do a little research and come to your own conclusions. Either way I don't think your brake rotors will overheat unless you are a track racer.@@RaimundN52

[@Akac3sh]

God I miss my n52 such a good engine

[@RaimundN52]

N52 best engine

[@Cruz.n]

And he said he went 15k miles with stuck open injector on this this shit is a tank

[@jaimermb]

Super funny intro!!!🤣🤣🤣

[@RaimundN52]

Thanks 😀

[@vmmramos]

How many miles did it have when it blew and for how many miles you had it ? I'm considering getting one as a daily car, I saw a manual one but its at 124k miles, kinda afraid it blows on my hands.

[@RaimundN52]

Around 120k I believe. They don't just blow up though, I have had others run great through 230k. I installed used injectors on this one, and one was damaged and I drove home on it thinking it was a failed o2 sensor which damaged the rod. It still ran another several months with a bent rod until it finally blew up. I would not worry at all about a 124k mile N52 if it was maintained.

[@saganworshipper6062]

You should get another Eaton M90 for the N54 lol! Has anyone converted from turbo to SC on an N54?

[@RaimundN52]

It did sound good! And my friend did a twin charge setup and then supercharger only setup on his drift n54. He went back to turbo though. I forget if he posted videos of it, his channel is Drive Harder

[@saganworshipper6062]

@@RaimundN52 Nice, I will check it out.

[@MSU.15]

@@RaimundN52 a good content/series would be seeing how much hp can you max out an n54 (n/a) on and see if the reliability increases without the turbos by a significant amount and try dyno'ing N/a n54 numbers

[@RaimundN52]

@@MSU.15the n54 would make much less power NA than the n52 due to the poorly cast head, the n52 has a nice cnc ported head and flows much better

[@ticzxsnipezz8882]

Hey man I was wondering do you have to run FI or can you run those injectors Na?

[@RaimundN52]

Hey, there's zero benefit to changing injectors unless using E85 or boost which both require more flow. There won't be any gains and they still need to be adjusted through tuning to run correctly.

[@bethmason4818]

Very cool!

[@RaimundN52]

No u

[@strawberyfanta1394]

about that trans swap, thoughts on zf8?

[@RaimundN52]

Zf8 would be much better than the zf6. But you will need a controller for it which is $$$

[@strawberyfanta1394]

@@RaimundN52 my concerns were with the driveshaft, I wasn't even thinking about a controller. I'm new to the trans swapping world 😅

[@RaimundN52]

@@strawberyfanta1394custom driveshaft from a driveshaft shop is a few hundred bucks. Definitely doable you just have to give them measurements

[@strawberyfanta1394]

@@RaimundN52 gotcha, I was considering swapping my shit gm trans for a zf8 but it seems too pricey now lmao. good luck with the build, n52 truly is the most engine ever

[@RaimundN52]

@@strawberyfanta1394Zf6 would be much cheaper and an improvement. The gen 1 should be nearly plug and play. Xhp has a guide on their website

[@MrJohn2590]

if i have a AA tune ,can i run GT2 injectors?

[@RaimundN52]

No, get the 22rpd tune on bavautoparts.com

[@UltimateBimmerExperience]

Awesome performance and inspection techniques shown. FUCK335i ///N52 the car ever

[@RaimundN52]

Thank you Pat, this is definitely the compliment ever

[@KooshiesElectronics]

@@RaimundN52 you both have the grammar ever.

[@KooshiesElectronics]

btw, Nice scotty collab

[@zureai]

Should i get a 119k Mile e92 with n52 motor?? Seems kinda high mileage doesnt ot

[@RaimundN52]

Depends on the price and how it's been maintained. I've bought all of mine between 120-200k. 119 isn't bad at all with maintenance

[@zureai]

@RaimundN52 Yeah it's got leaks, but the owner is trying to sell it so he hasn't fixed it up. Asking 8.5 CAD lol. For a 2011 model. I'll probably need to spend 4.5k initially...

[@FixofNicksMix]

​@zureai i bought mine (n52 08' 328i) with 180k miles for $2,900USD. Gotten about 10k miles out of it but it stranded me for the first time today. Blew a hose, nobody wanted to help out so i walked to the parts store, got the hose and replaced it. While replacing the hose i noticed i have a ton of oil in my coolant. Now deciding if i want to rebuild the engine i have or buy another motor.

[@zureai]

@nicholasbolton9996 Dang sorry to hear that! If you're doing the rebuild or have a trusted person do it then that's 100% the way to go imo

[@FixofNicksMix]

@zureai yeah, i have another project car i got for 300 bucks that hopefully i can daily drive that instead long enough to get the e90 fixed

[@steadybreeze1443]

Convert to a 6 speed manual.. you will not regret it

[@RaimundN52]

I don't want a manual in this car

[@riazo4910]

bro, i actually tried your method of inspecting the rod bearings and pistons and now my car is not starting, please help.

[@RaimundN52]

Try turning it on and off again

[@rebeccahessel]

💔 promo sm

[@A92_]

ls swap

[@RaimundN52]

I can't say I like the LS enough to swap one. If I was going standalone ECU I woild do a turbo M50

[@davidhenry4265]

N52’s are poo

[@ogasap862]

ok David henry😂😂

[@PhaceN52]

Lol and N54 are reliable /s

[@RaimundN52]

I guess it's true because it rhymes

[@Mp-jw1qg]

n52's for ppl who cant afford n54's lol

[@RaimundN52]

@@Mp-jw1qgI've had a dozen n54 powered cars but the n52 makes more sense for a reliable time attack car for maximum seat time.

[@concernedemployee5897]

Good! Less of this on the road the better

[@RaimundN52]

It will be back on the road soon 😁