My New Jobsite Table Saw - Einhell TE-CC 250 UF - Unboxing, Assembly, Test Cuts / Woodworking

I hope someday artificial intelligence mimics my mistakes.
-----------------------------------------------------------------------------------------------
My New Jobsite Table Saw - Einhell TE-CC 250 UF - Unboxing, Assembly, Test Cuts / Woodworking
-----------------------------------------------------------------------------------------------
▶Business Email : [e-mail]
-----------------------------------------------------------------------------------------------
Do not steal my video against my will.
I've never allowed anyone to use my videos.
-----------------------------------------------------------------------------------------------
▶ Einhell table saw (Amazon DE) : amzn.to/3eqIL8r
▶ Einhell table saw (Ebay) : ebay.us/Y3JD4q
“As an Amazon and Ebay Associate I earn from qualifying purchases.” If you buy products through the links above, you are sponsoring my creation.
-----------------------------------------------------------------------------------------------
▶instagram : bit.ly/mokongtv
-----------------------------------------------------------------------------------------------
▶Mokong View: bit.ly/2LEVQhc

[@CarmoniusFinsnickeri]

Put the riving knife back! If you want to cut grooves, buy a second knife and cut off the top on it so it's lower than the blade. The bevelled cut you do with the panel standing up looks super dangerous, especially without riving knife. Slightest you deviate from the fence after the board passed the blade you will have monstrous kickback.

[@mokongtv123]

I love your comment. That day I modified the riving Knife and put it back again. When I met this kind of comments at my channel, I feel I'm still living NOW. You watched my video as if you were me. Thank you and hope you good luck, AND SAFE!!! kzbin.info/www/bejne/a5aymaqwlqmZpLM

[@coldspring624]

amazing that you displayed the cuts that showed the burns

[@codysmith1915]

Man I wish more table saws had that sliding feature that this one does. That is genius

[@peterfitzpatrick7032]

0:57 ... someones excited... 🙄😂 I shortened my riving knife to just below the height of the sawblade so I don't have to remove it if I'm cutting half-lap joints , rebates etc. If you are constantly taking it (the unmodified knife) on & off, you will eventually just leave it off, not a good idea... Nice tablesaw man .. 🤗 😎👍☘🍺

[@mokongtv123]

I did the same Job. kzbin.info/www/bejne/a5aymaqwlqmZpLM

[@peterfitzpatrick7032]

@@mokongtv123 great minds think alike !! 😂😂 😎👍☘️🍺

[@Lone-Wolf87]

Everyone always gets excite when new things get unboxed. 👍👍👍👍👍👍👍👍

[@dekayscrafts]

브레이킹도 부드럽고 소리도 매끄러운 느낌이에요 좋아보여요~ 👍👍👍

[@mokongtv123]

장점도 있고 단점도 있습니다. 가성비 측면에서는 만족합니다^^

[@cleliosilvasilva1659]

Gostei dessa bancada curti muito .Parabéns 👏🏻👏🏻

[@silvergrizzly316]

I likes it, I likes it very much!!! 😄 looks like somebody got a nice, new man cave toy 😀👍👍

[@luizzahome]

It has been a good job, congratulations, I wish you success

[@andreabirritteri6599]

Che ebbrezza quando arriva un nuovo giocattolo.

[@mihamaker]

Looks like good alternative to Bosch PTS10. Very similar products. Good info about Einhell. Have quite of their 18V battery tools. Real happy about it. It is best quality hobby tool manufacturer. In large amount better than most of the green Bosch products. For this saw it needs a bit testing. Also PTS10 is a rather old product.

[@Zglemb79]

I have this same table saw for a year now and it is very good for the price. It is very similar to the PTS 10. I also have some 18V and 18+18V tools from Einhell and quality is great for the price. Einhell has really improved in the last few years!

[@mihamaker]

@@Zglemb79 Yes, I found in the past 3years that their goal is to be best hobby tool manufacturer. But In that instance, some of them are compared with pro style tools. In my opinion, that is s good thing, because one can find thin line there. Also why spend at least double the amount if one won't use it every day, or at least not in the amount like it would be used daily in a pro shop.

[@dymone4894]

I am seeing more and more 18v items available here in the USA but cannot find any of their corded tools. I won't be interested in trying some out.

[@sergoloktev2256]

I think that Bosch saw is beeeeetteeeeer... It's gift for you?

[@joseantoniogiraldogonzalez9950]

Cordial saludo. Al parecer le están metiendo mas precisión y ajuste a la infraestructura, pero además de innovación. Veo, en este caso, que es una máquina robusta, llamativa y segura. Me gusta el hobbysmo y tengo mucha herramienta de esta marca, pero la anterior sierra circular Es mala y desajustada y la devolví. Espero poder acceder a esta nueva.

[@standsguadalajara]

En mi caso prefiero invertirle poco mas para una Makita o Dewalt... y ya si quieres precisión vas por una Mafell

[@joseantoniogiraldogonzalez9950]

@@standsguadalajara gracias por tu comentario

[@sddiymakeitworthit7512]

Awesome assembly nice 👍

[@sddiymakeitworthit7512]

@피넛티비 super awesome 👏

[@randolfi.bledoeg9028]

Nice to have a new 'toy' 😀

[@ghsh837]

Congratulation on the new toy.... I thought you have a Dewalt when you made your video on bench top.... anyway wish you enjoy it without remorse😀😀

[@zanbohaxraf6525]

ان

[@mkhenebuli7903]

Nice tool and it gives clean cuts too🧚‍♂️

[@elnovatojc8050]

wow that machine is beautiful, I would like one

[@MustPassTruck]

Wish we had the sliding table feature on jobsite table saws in USA.

[@MustPassTruck]

@버버티비 Someone translate for me please lol.

[@3579rock]

I actually envy the availability of brands and models you have in the US. In most south american countries we get these low-end/quality models like the DeWalt 7470, that, despite being relatively cheap, are a nightmare to set up and calibrate.

[@Erik_The_Viking]

My Ryobi BT3000 has that feature. Not a common feature in saws in general, people are split on it but it's useful for me. I like the saw's option of being able to lock it in place - really nice.

[@badrudinudin83]

I like shoft start motor sound

[@eduardoarielvissio1198]

Excelente herramienta!

[@janavy2510]

Nice piece ,nice work .

[@ebh295]

Nice saw. How about a zero clearance insert when making the panels.

[@mokongtv123]

Need to adjust.

[@vladimirlobanev1076]

Красавчик...!!!

[@piotrgradzik4352]

Congratulation, good job. But what happend on yours Bosch ? Is not good ?

[@mokongtv123]

blade lifting system is not good.

[@sjt275]

Mine burst into flames and nearly burnt my shed down ! Hello Mr DEWALT !

[@jhoanalexisriossaldarriaga6240]

El mejor video que he visto. Excelente video.

[@lucimarsousa2848]

Gostaria de saber o preço dela

[@-grandsonofcarpenter5987]

고놈참 소리가 우렁차네요^^ 👍

[@mokongtv123]

소리가 안정감이 있습니다. ㅎㅎ

[@alfredolentini9422]

Sega da banco cinese. Durata....4 o 5 tagli. Complimenti ( si fa per dire) per l'acquisto!!!!!

[@deeenoo]

Best a man can get

[@cakeisalie]

not bad for ~$400 I love the red color

[@국어-e5i]

대형 유투버가 되어가시네요 ㅎㅎ 백만기원!!

[@mokongtv123]

샘~ 오랜만입니다. 감사합니다^^

[@mouacab101]

Felicidadesss !!!! Es genialll an pensado en todo !!!

[@o4eni_zloiy]

Отличный инструмент.

[@MrGonzach]

Felicitaciones Mokong

[@nigelhunter4230]

Great video. Thankyou

[@eballacharles0302]

😲😲 new table saw einhell 👍👌👊

[@daffaibnuhafiz]

Very work ||

[@bahaaaldeen6744]

Congratulations

[@arshadalishah3817]

You need a better stand for that saw. So if you thinking making one do upload how you made it.

[@alfaomega4381]

¡¡ Congrats !! great machine

[@yahirtecuapa4792]

Alguien se dio cuenta que antes trabajaba en una carpinteria con erramientas muy buenas y ahora esta en otro sitio de trabajo con erramientas de menor calidad y aun asi sus trabajos estan bien chingones. Pero si tengo esa duda ¿que paso?

[@mokongtv123]

I don't prefer to use expensive machines. I love trying out new machines for good value.

[@Haribabu-ij6np]

Well and good great job

[@붕반깜붕]

은퇴후에 목공분야에 관심을 갖고있습니다. 보다 전문적인 기술을 익히는데 추천하시는 교육프로그랭이 있을까요?

[@mokongtv123]

국비지원을 해 주는 훈련기관이 꽤 있는 것 같습니다.

[@rolandcornille3531]

j'ai du matos enhel j'en suis content cette scie sur table à l'air pas mal

[@patrickarchuleta9594]

How much did you pay for the new table saw.

[@julietphillips1991]

Why did you choose this brand?

[@mokongtv123]

I chose it because it looks sturdy and has good mobility.

[@gorzo_6439]

Just one question: is there a soft start system on the saw?

[@masterskaia_23]

Хороший аппарат, сколько он у вас стоит?

[@masterskaia_23]

@@stroitel1634 Может для вас и "хрень" для меня один косяк, диоптр не удобный.

[@MrJetDevil]

Лучше доплатить и взять DeWalt, хотя почти по этой цене можно взять новинку от JET с чугунным столом

[@masterskaia_23]

@@MrJetDevil да и бош не плохой

[@vnuendru1]

@@MrJetDevil это который jet?

[@enockbatista6008]

No Brasil não tem desta máquina einhell a máquina de serra einhell que eu tenho é muito diferentes

[@rafaelmoyaogaleana]

Fabuloso 👍

[@mouacab101]

Hace nada es la nueva mesa , an modificado algunas cosas siii....la veo muy bajaa pero si el motor es mas bueno y las guias y la meza en si ....

[@josenavas7770]

Hi, I have an saw einhell. It’s very good. Sorry for me English.

[@mokongtv123]

I understand your English.

[@piasidadleo7613]

full suport n rin sayo idol dikit n s bahay m

[@andresolano5888]

The Bosch 10xc will eat this thing for breakfast!

[@danilogujtman6140]

You can't compare Bosch with this hobby tool

[@danilogujtman6140]

Einhell cost about 130€ and Bosch is more than 500€

[@michaelanderson1788]

👍👍👍👍👍

[@VFZtube]

Is it worth the money spent?

[@RomaRush]

Жесткость как у детской игрушки

[@livutufinutu5884]

👌👌👌👌👌👌👌

[@ВасилийЮркевич-к2ф]

👍👍👍

[@mouacab101]

Incribleee !!!

[@danijelkrivak2491]

And what are your impressions on this table saw?

[@vinopit]

Are the legs sturdie, robust, fixed or not realy?

[@YunMyeongCheol]

아인헬 목공기계를 몇개 구입해본 사람입니다. 사용중인 테이블쏘는 오래전에 너무 싼거를 사서 괜찮은 걸로 구입하려고 하는데, 혹시 보쉬나 다른 테이블쏘보다 장점이 있을까요? ^^+

[@mokongtv123]

안녕하세요. 기본적으로 스펙이 다른 제품이라 단순비교는 어려울 것 같습니다. 다만, 제가 아인헬 처음 사용하면서 느낀 장점을 말씀드리자면, (1) 기계가 회전할 때 안정감이 있습니다. (2) 스타트와 멈춤이 부드럽고 빠릅니다. (3) Rpm이 높아 깨끗한 절단면을 만드는 데 용이합니다. 세세하게 파고들자면 한도 끝도 없이 장단점이 나오겠지만, 조금더 사용해 보고 두 제품을 비교하는 영상을 한 번 만들어 볼 생각입니다. 사용한지 얼마 되지 않아 많은 정보를 드리지 못하는 점 양해 바랍니다.

[@mokongtv123]

혹시 괜찮으시다면 제 이메일로 연락처를 남겨주세요. [e-mail]

[@jcagam3811]

Does it accept dado blades?

[@robertocollicelli6734]

La verità..... Funziona bene?

[@gillesmarange991]

👍👍👍👏👏👏

[@victormazuelos3293]

Muy interesante

[@박수남-z8i]

이 공부에 대해서 관심이 있어서 댓글을 했습니다 설명을 좀 해주세요

[@guilhermedemelodasilva494]

Sonho de consumo...

[@pawjeppesen-ifttttricks605]

How precise is the fence?

[@mokongtv123]

Not bad

[@3dprint4woodworking59]

I have some accessories for this table saw if you are interested in ! (Mitter bars, zero clearance insert, gauge jig for blade adjustment etc) let me know!

[@kazeemmorakinyo392]

Please how much did you bought it

[@marionisperos6675]

Where is this made?

[@brucecarey1780]

Who is the agent for this in South Africa plse/!

[@phoenixgonlee8408]

보호 덮개가 어색하고 불편하신가 보군요 ㅎㅎ

[@mokongtv123]

이전 톱에서도 사용을 해 본적이 없어서 좀 많이 거추장스럽습니다. 대신 더 안전하게 사용하려고 노력합니다^^

[@phoenixgonlee8408]

@@mokongtv123 선생님. 이전에 찾아뵈었던 사람입니다. 성격상 댓글 잘 안하는터라 눈팅만 하였는데요... 덕분에 많은걸 알아가고 있습니다. 항상 안전 유의해주세요. 그래야 저도 밝은 마음으로 영상 계속 볼수 있으니까요

[@mokongtv123]

@@phoenixgonlee8408 아, 그러셨군요!! 걱정해 주시는 마음 깊이 새겨 항상 안전에 주의하겠습니다^^ 감사합니다~^^

[@Haribabu-ij6np]

How much this cost Where it is available

[@bilcres]

How much this power tools?

[@mokongtv123]

Prices vary from country to country. In Korea, it is about 600 dollars.

[@massimilianomosca2284]

Wich angle for door?

[@mokongtv123]

15

[@Tradewind25]

Hi, Can anybody tell me the maximum ripping width that this this saw can handle? Thanks.

[@megavarnam7723]

Hi, i from malaysia in malaysian price is howmuch and where we buy and address

[@ПетрКоровин-э2ц]

👍👋👋👋

[@danilorabara7661]

How much price pls.

[@nghitchanneltv9253]

Like 👍👍👍

[@mokongtv123]

Thank you!

[@ramprakashsharma3405]

भाई ये मशीन कितने का और कहां मिलेगा। कृपया बताएं

[@김산-l8l]

슬라이딩기능이 일자로 각이 잘나오나요?

[@mokongtv123]

슬라이딩 정반 쓸 만합니다. 보쉬보다 우격이 덜 한 것 같습니다.

[@김산-l8l]

@@mokongtv123 슬라이딩 가능한 길이가 어느정도 되나요?

[@proissproiss]

Да ему ненадолго) Так как он к ТБ относится никуда не годится

[@MegaOfChaos]

4:04 wait thats iligal ;p

[@mokongtv123]

I swear to always use it safely.

[@leandromagalhes32]

Quanto custa uma serra dessa completa

[@joserobertofrancavillasboa2223]

ONDE COMPRAR NO BRASIL ??

[@frankpourcel7068]

How much?

[@a.ra.n2258]

What,s praiz Rs ?

[@noeyhod]

오잉!?

[@mokongtv123]

어떻게 하다 보니 이 기계를 사용하게 되었습니다 ㅎㅎ

[@noeyhod]

@@mokongtv123 ㅎㅎ 안전목공하세욧!!

[@paulmcdonald5287]

If it like any einhell tools I have bought it should last two days before some thing breaks bad quality even worse customer service wouldnt touch anything made by einhell ever again

[@burhanucar5690]

Kaç waatlık motoru var ve

[@mokongtv123]

2000W

[@yungaterror]

Wow its loud

[@effusorsanguinis9313]

Какие жуткие люфты :(

[@집수리달]

오웅 서울시

[@wilianr9319]

Esa marca es mala