I found this drive cheap, and now i need to check it all out.
Пікірлер: 51
@Zerostar36912 жыл бұрын
Thanks for this vid Frisco. I was able to successfully build my pressure tester with the info you provided.
@irapesheep12 жыл бұрын
its for surface piercing props like cleavers.. which work best when they get 1/2 air 1/ 2 water. Either way, you can mount it higher so the prop gets some air, but your water inlet stays submerged.
@kapitan.unitazaАй бұрын
You were right the first time! Shrader is the correct name and you can do this test with a bicycle pump which has a built-in manometer. Thanks fkr the valve and hoseclamp idea! 😊
@FriscoBoatersGarage12 жыл бұрын
Spread the work about the channel. I spend all that I earn on youtube on projects for you guys.
@callumwearne78708 жыл бұрын
Your new lower case probably has a different gear set, personally I would've just replaced the output shaft of your old lower unit its quite easy to do
@sketchyssk8shop8 жыл бұрын
Thst pointed nose cone helps with fuel economy since you do not have a high speed boat. you may have to run a different prop since the lower gear ratio is gonna be higher than the one on your heavy boat.
@jm09130812 жыл бұрын
Sure does. I look forward to seeing more out of it. LOL. You know Higher Grade Equipment, Higher standards. LOL
@eyezonr6 жыл бұрын
WOW!!!!!!! the seal kit and gears alone is 300.00 for a alpha 1 for a bravo prob like double. an i need to redo my seals. i had water in my gear oil so im going to use this format to test my pressue.
@FriscoBoatersGarage6 жыл бұрын
Yeah and you need special tools. It's a pain.
@chriscorum72664 жыл бұрын
Can u tell me if i can swap my twin alpha drives for bravo3 drives with out changing the gimble part or is the gimble diff on bravo drives
@FriscoBoatersGarage12 жыл бұрын
@goldens984 It should be. It has been raining on stop since I bought it, and I have not had a chance to go look at my Sea ray to see. This one s a 1.50 to 1 ratio, and I think that is what my boat is.
@John-jz9pr9 жыл бұрын
great help.I found some water this spring.Dealer missed it last fall for winterizing.Sure saves time doing our own work as I have 268 searay alpha 1..Bought it in 2009.Had some work on it and no problems since.Again thanks much
@devildogae7 жыл бұрын
I know this is an old video, but I'm getting ready to go down the road you've traveled several times and going to totally rebuild a boat I just bought that was neglected. I don't have a marina close. Where would you suggest to look for parts online that have good prices. I have an old Mercruiser GM motor and Alpha 1 outboard. Thanks. BTW I've been watching all your vids in order and you very thorough, bravo!
@GioArmy6810 жыл бұрын
You robbed the guy blind,,, LOL holly shit what a great deal!!!! Love your videos I'm doing my transom on my 1972 Chris Craft lancer, your videos gave me the courage to go for it, thanks for teaching me how, I watched all your videos on your Sea Ray
@gt150glas9 жыл бұрын
If I saw spacers like that on the top cap screws I wouldn"t have given the guy fifty cents for it Whoever put them there is a major "hacker".
@FriscoBoatersGarage12 жыл бұрын
@jm091308 I like it too. I am trying to figure out all it will do. It sure makes clearer videos.
@turdfurgeson5173 жыл бұрын
Is that a tr2 drive
@Georgiagreen3175 жыл бұрын
Old adage. A deals a deal only if you need it. At least that's what I tell my wife.
@FriscoBoatersGarage12 жыл бұрын
LOL... I still have not done it yet, so you may beat me too it.
@ChrisLawley4312 жыл бұрын
Don't be afraid of the nose cone, heck it may help on speed. You could probably turn around and sell this thing for some serious money especially seeing it has this racing style nose cone on it. Does the lower unit have a low water pickup just under the pointed cone? or is the water pickup on the sides?
@brianrhoades52713 жыл бұрын
I dont know why people talk so dam much to make such a simple pressure test
@FriscoBoatersGarage3 жыл бұрын
Some people are slower than others
@turdfurgeson5173 жыл бұрын
Why did U watch the fucking video just to talk shit. Dick
@FriscoBoatersGarage12 жыл бұрын
@riverking4u Yep you always fill from the bottom to prevent air bubbles.
@FriscoBoatersGarage12 жыл бұрын
@deanoobaby No they are sealed. You want them to hold pressure .
@FriscoBoatersGarage12 жыл бұрын
@live4545 I think he meant a chubby in another way...
@vladyerus12 жыл бұрын
darnit frisco... that half silver half black idea was mine! lol on my build on iboats its post 141 take a look. i think it would look really nice.. my rebuild is on hold until i get my house which should be coming up end of april!!! still on track for my splash goal though. Take care -74bayliner
@FriscoBoatersGarage12 жыл бұрын
@welderman27 there are water pickup on the sides.
@upallnight88812 жыл бұрын
A little video tip, place the camera on a tripod and take your final scene for the day, (leave the camera at the same location and still on the tripod) with your camera still on the tripod start your scene the next day. Use a dissolve effect to transition the previous night scene with your new day scene. It would look more professional. Great video and great score.
@AngelsSong10012 жыл бұрын
Too good of a deal. Probabaly stolen =(
@FriscoBoatersGarage12 жыл бұрын
@AngelsSong100 Nope had the serial number checked.
@kubaSWAT4 жыл бұрын
Hi,Can i pressure just a lower or upper part ?
@TheWaterDoral12 жыл бұрын
It cost $3,000 to replace the lowers of two bravo three's. They became so corroded that it was unsafe to use. Luckily it happened within months of our warranty ending so Mercruiser covered it.
@FriscoBoatersGarage12 жыл бұрын
@upallnight888 Thanks for the tip.
@riverking4u12 жыл бұрын
Silly of me to ask but, you are filling the gear oil form the bottom up aren't you? keep up the great information!!!!!!!
@vladyerus12 жыл бұрын
Ha! thanks man your an inspiration you really are... and not just me!! keep up the good work and do another project ;)
@trickalloy12 жыл бұрын
Great find I swear your channel is like watching a t.v series ,can't wait for your next video
@PersuaderboatsGoFast12 жыл бұрын
Strip the paint from the lower. Leave it natural.
@live454512 жыл бұрын
ha ha he called you chubby jay lol.. you deff got follwers ... great videos!
@ChrisLawley4312 жыл бұрын
The Nose cone will be fine and what a great find you have there
@irapesheep12 жыл бұрын
nosecone with low waterpickup if the sides are welded tight or closed.
@deesterdee12312 жыл бұрын
dam you got a chubby tell the truth !!! really like your video's
@live454512 жыл бұрын
@jay. Lol yeah I get ut now .. Poly must be getting to me ha ha
@FriscoBoatersGarage12 жыл бұрын
@deesterdee123 LOL!!!
@jm09130812 жыл бұрын
HA! Cool Graphics! I like your MAC!
@roberthobin662010 жыл бұрын
Super Deal! You did good!
@BigJoethib12 жыл бұрын
wow Jay 500, up here in canada they sell used stern drives for over 2500$... very nice deal
@stevekline11715 жыл бұрын
yes canada is one big scam/ripoff ! everything that is new or used is like quadruple the price compared to the good old USA :)