My portable(+affordable!) pedalboard (Feat. Mosky, Mooer, Nux and more!)

Hi there, this is the order: Guitar- Tuner, B Box, Compressor, Mooer 010, Volume pedal and then NuX. I think that is the typical order.
Got a Dimarzio cruiser neck pickup and a bit of rewiring.
*Straight into Apollo Twin audio interface. (NO AMP)
Used pedals:
-Moor Preamp 010 (Amp/cab simulator)
-NuX Atlantic Delay/Reverb (Stereo out)
-Mosky B-Box
-Morley M2 volume pedal
By the way this pedalboard is powered only by a portable battery! (Using BirdCord usb to 9v converter cable)

[@stellararchivescreativepro6674]

your tone is exquisite man!!! great playing too. You are a living proof that you don't need expensive gear to sound expensive.

[@DanielCstudio]

Thanks! Yes..!! If we spend decent time on sound, we can get good sound from cheap gears..!

[@lexist7]

your board may be cheap but your playing is expensive! haha

[@markargel6119]

NuX atlantic is surprisingly good! :)

[@PeterCleff]

Duuuuude!!! This is absolutely insane! Your playing obviously does a lot of the work I would say, but dayuhm them tones are rich!!! You've sold me on this!

[@ey2306]

I always knew that the sound is in the fingers and not in the gear. Fantastic use of the skill mate! Hats off!

[@JSmith-mu3fq]

Sounds Amazing! Tone is beautiful.

[@jbert7289]

You sound so good. Thank you for sharing your pedalboard with us.

[@DanielCstudio]

Thanks for watching Jay. My pleasure!

[@her0de84]

AT would be proud...liking the 010 with the b-box*

[@영상시청용자기계발부]

최근 몇년간 봐온 보드들 중에서 가장 스마트한 보드인 것 같습니다 대단하십니다!

[@영상시청용자기계발부]

아 혹시 카메라는 뭐쓰시나요? 색감이 너무 좋네요

[@DanielCstudio]

@Hyun현 감사합니다! 카메라는 Canon M3 f2.0렌즈를 썼습니다. 보드는 이제 또 바뀌었는데 영상 업데이트를 조만간 해야겠네요..! ㅎㅎ

[@odo_until_2022]

꽤 전에 유튜브에서 본 영상인데 정말 톤이 좋아서 감명이 깊었습니다. 알고보니 한국분이셨군요... 정말 톤도 잘잡으시고 연주도 좋은것 같습니다. 좋은영상감사합니다!!

[@DanielCstudio]

감사합니다..!! 톤잡는걸 좋아하다보니 연주는 신경안써서 더욱 톤잡는 쪽으로 영상 만들어보려구요...ㅠㅋㅋㅋㅋㅋ 앞으로도 좋은 영상 유용한 영상 만들어보겠습니다..! :)

[@thewatcher611]

Great tone, man! Really sounds great.

[@Lordcamilli]

Holy shit, those are some killer chops, mate. And your tone is fucking amazing. Great job, man

[@jonboy82]

Amazing tone!! And the tone is in the fingers!

[@trevorhoward2254]

Sounds nice Daniel. A talk through would be good...

[@erictoniaschwab1009]

Love this board of yours Daniel. Thank you for showing. I’m working on a mini board right now for church and smaller gigs where I don’t need my huge board. I’m looking at one of these Mooer pedals for when I have to go direct. That Nux Atlantic sounds good. Did you say you’re not using an isolated power supply with this board?

[@DanielCstudio]

Yes, I am using it with my portable batter..!! :) Search birdcord..!

[@marshaarestha1947]

very simple but ur set up is very nice sound. perfect

[@62TeleC]

this is great! I changed over to a similar system after viewing this and stopped using the modeling amp. I use various overdrive pedals (Caline Orange Burst as the main one) and use the Mooer Baby Bomb as the amp, which delivers decent clean tones.

[@wjk6931]

제가 딱 선호하는 기타톤이네요.듣기 참 좋아요. 이나아빠님 영상 자주 보개 됩니다. 최근꺼도 너무 좋네요. 연주도 참 잘 하시고…. 사실 님 영상 보고 hx stomp도 질렀는데 시간이 없어서 몇번 만져보지도 못했답니디.ㅋ

[@DanielCstudio]

감사합니다~ 요즘 뜸한데 다시 열심히 해봐야겠어요~ㅠㅋㅋ 저도 요즘은 시간이 없어서 자주 못만지네요.

[@ghostoforion1745]

best tone ive heard in a while, who needs strymons and klons

[@DanielCstudio]

Thanks!! haha. But you will see in my latest videos, I have moved on from this board. ;)

[@yannjouan1544]

very great video ! nice sound !! can you tell us more about the portable battery? the number of usb output...what you exactly power with? than you ..

[@rubenj5269]

0:42 when you forget tht you have a tremolo bar

[@BigHerm111]

Nice playing

[@shafiemisa6324]

Great sound at a cheap price!!!!!

[@mlewmisc]

Really like the way you EQ'd this -- what are your general go-to EQ settings for guitar?

[@DanielCstudio]

I turned off mid all down since it has too much mid frequency. Generally too much mid is not good..! ;)

[@jazzydog]

This is proof with cheap pedals you still can get a great sound!. Great playing btw!. Cheers.

[@meepogg8921]

haz una review de tu compresor por favor quisiera saber como suena para decidir si me lo compro o no gracias

[@meepogg8921]

@@jrgutierrez316 Entonces no es tan bueno ese pedal.. Gracias amigo,no encontraba ninguna review de ese pedal Lo quería comprar porque estaba barato jeje Creo que comprare otro nomás Muchas gracias

[@meepogg8921]

@@jrgutierrez316 le escribí en español y inglés Pero no importa creo que me comprare otro

[@rockstardr]

Great sounds man

[@N0rd0n]

Nice tone

[@jhonynaibina]

Great sound 😍😍

[@facundomenendez8029]

Hi, great playing! How do you power your pedals? Do you use a portable battery with a daisy chain?

[@DanielCstudio]

Yes, that is correct. It can be a bit noisier than a dedicated power supply though.

[@cliftontorrence839]

good job. thank you

[@Jaya_Hutasoit_Official]

Awesome!

[@adnan.nabil.maarof]

Fantastic!

[@aquilarossa5191]

Did you find the micro preamp is a bit hot for the inputs of the interface? I have the 019 PLX and had to keep the output very low or the preamps on my Audient iD14 would clip. I was not sure if the tone changed having the VOL control so low, because I could not test it running it higher due to the clipping. I have a Mooer Preamp Live now that has a master output control which solves the problem. I also have a JMP50 clone that I run thru a Two Notes Captor 8. I am thinking of running that setup in the loop of the Preamp Live in capture mode, so the amp and load act like a preamp and power amp model, which the Live then adds IRs to. That way I would not have to rewire everything when i want to switch from using models to using an actual amp. Not sure about delay and reverb for this setup. I like using some tools in DAW for compression and EQ and want time based effects to come after that, which makes running reverb and delay before my interface not possible. I stick with plugins for now to do that. The N-UX Atlantic or the Mooer Ocean Machine have my attention. For echo before the amp like old school players did, I want the Catalinbread Belle Epoch Deluxe. Pricey, but good. A different sound than running delay in a FX loop or adding it post in DAW.

[@DanielCstudio]

It is often normal having a high output for line input. Use the pad button on your audio interface. I often record dry and put fx later for tweaking. But if it is the sound you want from that fx pedal, I will just use that. (can't be bothered with re-amping.)

[@rockyshrestha5401]

Where have I heard this piece

[@joelbizzle4174]

Very impressive. Looking to by the two stones 010. What’s your signal chain order?

[@DanielCstudio]

Gain pedals right to left-> MOOER AMP simulator -> Effects. It's a typical signal chain.

[@lfmd]

Wow great sound. What do you think about the mooer 010??

[@DanielCstudio]

LuisFer73 Good for the price and it is small. ;)

[@k.yhk8274]

It sounds great ...just need your honest opinion ....on these three pedals...010 mooer , b-box , dynamic compressor . How good is it. Would u recommend , I'm more into praise ^ worship ...does all these pedals have noise free?

[@DanielCstudio]

I only use mooer for clean sound. Its high gain is very noisy. B-box does add noise and overdrive pedals will add noise anyway but it's not the quietest pedal. You get what you pay for and it's up to the player. I recorded that directly into my audio interface and I don't hear much noise while I am playing. You might hear some from this video as well.

[@k.yhk8274]

@@DanielCstudio thanks man....wb silver compressor

[@DanielCstudio]

@@k.yhk8274 sorry for the late reply. I don't like the mosky compressor.. noisy and sounds like $20 pedal.. B Box sounds more than $30 pedal!

[@denmarkbueta7665]

Sir what did you use on 2:30? I want to use that tone for church playing

[@DanielCstudio]

I am using the infinite decay setting on NUX Reverb.

[@denmarkbueta7665]

@@DanielCstudio Thank you sir 🙏

[@ymelfilm]

I have the same B Box, tuner. Isnt the B Box noisy a bit? I feel it noisy And now it is at the repairman bc it died. He said it is a very simple and cheap circuit

[@DanielCstudio]

it is a cheap pedal though.. and yes it is noisy compare to my other overdrive pedal. You will hear noise on this video as well.

[@francoisbloch3335]

Hi, great job, man. Can you tell me what is the pedal on the top left?

[@DanielCstudio]

Force by Shift-line. Check this video featuring the pedal. :) kzbin.info/www/bejne/jarRnn-tnqejn9k

[@francoisbloch3335]

👌🏻👍🏻

[@francoisbloch3335]

And your pedaleboard ?

[@pvdmac]

Brilliant

[@kuraienoga5208]

Size of your pedalboard please?😍

[@jetjazzblues4888]

Great!

[@DanielCstudio]

Thanks!

[@MrYannvaran]

Wonderfull tone!!! What is the order of your pedals?

[@DanielCstudio]

Hi there, this is the order: Guitar-> Tuner, B Box, Compressor, Mooer 010, Volume pedal and then NuX. I think that is the typical order.

[@MrYannvaran]

Daniel Chung i have the 010 two stones too, but when i connect to PA it sounds digital... do you have a secret way?

[@DanielCstudio]

@@MrYannvaran Have you turned on Cabsim on 010?

[@crisjohnalvarez6036]

I have the answer although its a clone of a bbpreamp, Xotic reply to my message this is the reply - from (Xotic guitar & effects): It is its own thing - however it does have a midrange growl similar to the TS pedal. Its an overdrive - the name BB Preamp is meant to recall the preamp of a amp that you turn up to create overdrive

[@meepogg8921]

You compressor is good?

[@bagusss3772]

Hey, is it okay to put cabsim before delay to get stereo output? Thanks. I like ur sound.

[@DanielCstudio]

Yes. normally it should be before fx such as delay.

[@gabcaxias]

Nice! what size of pedalboard?

[@henriquecorreia9917]

Nice pedals, but the NUX Atlantic is in my opinion very expensive for what it offers.

[@DanielCstudio]

Henrique Correia it is not very expensive. Delay and reverb. Three different sounds each with infinite decay, tap tempo and etc.

[@henriquecorreia9917]

@@DanielCstudio you are right, but is the same price as EHX Canyon... and this one is top one

[@DanielCstudio]

@@henriquecorreia9917 I think EHX canyon is not a reverb. Just a delay.

[@henriquecorreia9917]

@@DanielCstudio Yes I know but it has more delay options, much more...

[@DanielCstudio]

@@henriquecorreia9917 It's up to what you need. Try if you can find a pedal with 3 different delay and reverb..? And you know there are many other options not just EHX or NUX.

[@crisjohnalvarez6036]

Why front of compressor?

[@DanielCstudio]

I think I used as a booster there.

[@crisjohnalvarez6036]

@@DanielCstudio Very nice tone! Very very close to andy timmons

[@DanielCstudio]

@@crisjohnalvarez6036 Thanks! I love his playing! :)

[@crisjohnalvarez6036]

@@DanielCstudio I try to my last chain, before my cabinet sim, act as an "Preamp" totally i find the tone i want. I see the video of -rhet shull, a preamp in a box a Xotic bb preamp And other stuff I know that if you swap your pedal on the pedalboard its sound differently and many musician can not understand this, its endless tone there

[@ponygracian]

Awesome tone!, how good it's that Tuner pedal?

[@DanielCstudio]

Good enough for general tuning but not much detail. Think it was like $20.. Can't complain much.

[@versnellingspookie]

What brand / make is that guitar? It looks really cool!

[@DanielCstudio]

Just a Fender Strat. ;)

[@DanielCstudio]

Jaime Gutierrez I can’t recommend it. Too noisy. I sold it immediately and mosky has different ones nowadays I think.

[@Theylieohio]

What song are you playing in the beginning?

[@DanielAshleyDuo]

that's Electric gypsy by Andy Timmons

[@Theylieohio]

Daniel&Ashley thanks it took me a week to get that answer 👍🏻

[@PeppoRock93]

What is a name of song at 0:33?

[@DanielCstudio]

Electric Gypsy by Andy Timmons, one of my favourite guitarist..!!!

[@diversifying]

Top D+👍👍👍

[@musicchords8549]

Magkano nagastos mo boss lahat?

[@jediborj]

Rad stuff going on here dude! Just need to ask you, what is your setting for the Nux Atlantic around 2:30 - 2:50?

[@DanielCstudio]

With NUX reverb, if you press down on certain reverb type, you can have infinite decay. ;)

[@xienwenlee8022]

Are the settings of mooer preamp same in both channels ?

[@DanielCstudio]

Xienwen Lee no. Can be different on the channels. Channel two is too much mid boosted compare to channel one.

[@eliassilva7209]

Did you record the signal directly on the audio interface, or is it on an amplifier?

[@DanielCstudio]

As I mentioned in my comment -> *Straight into Apollo Twin audio interface. (NO AMP)

[@eliassilva7209]

@@DanielCstudio Sorry, I did not see it. Incredible sound.

[@rubenj5269]

What app are you using?

[@Casquillo8520]

What compressor pedal was that?

[@DanielCstudio]

That's by Mosky.

[@js_guitar2144]

Which drive do you use?

[@DanielCstudio]

B BOX!

[@js_guitar2144]

@@DanielCstudio Thank you so much

[@klausmitwoch]

bee skilful

[@vintagetone22]

Sound nice.but.but no amp so it all sound nonesence

[@georgerichard7823]

Awesome!!!

[@mikegarcia179]

Awesome!