My QUAD piped custom exhaust on my 2012 Mercedes C250 (W204/C204)

How to video taking my Mercedes C250 from a single tip exhaust and upgrading/converting/installing to a quad tip setup.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Links on where I purchased my parts.
Magnaflow 13148 Magnaflow Muffler
EBAY: ebay.us/uLSUTY
AMAZON: amzn.to/3DyR24S
4" Stainless Steel Quad Tips
EBAY: ebay.us/uZxpN9
2012-2014 W204 AMG Diffuser (will not fit luxury bumper)
EBAY: ebay.us/DsQzLu
AMAZON: amzn.to/3jDOWZH
DISCLAIMER: This video is NOT endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.

[@TheFlexxGarage]

FOLLOW ME!!! Website: www.FlexxAlexander.com Facebook: facebook.com/FlexxAlexander1 Instagram: instagram.com/Flexx_Alexander

[@mikerivera6428]

Flexx Alexander I searched through the comments and couldn’t find an answer I have a 2008 c300 4matic sport and was looking to do something similar and can’t find anything especially because I live in MA the Laws here are strict as you know. Everything I’ve found was just straight piping it which we can’t do.

[@Tito84107]

Hey guys, to anyone thinking about doing this to their car, I 100% recommend it! At first I was a bit worried and skeptical about it, but flexx helped me throughout the whole thing, helped me what parts to pick, gave me estimates for me to have the idea on how much I was gonna spend, etc. And overall I decided to do it and I couldn’t be happier! My car looks and sounds amazing! It feels and sounds like a completely different car! So if your thinking about doing this, I honestly recommend you too! You won’t regret it.

[@TheFlexxGarage]

It's was a good process to go through with you. I hope you drive that new found beast around with pride!! Great job brother!

[@muhaameddrammeh8514]

Finally a channel for c250 lovers, I want to buy a c250 but I needed a channel with mods because stock is too boring. Thanks for creating this channel man

[@TheFlexxGarage]

thanks. I struggled with mods for this car since there wasn't alot of info out there. So I started this channel because I want to share with everyone that you can mod a c250 (a mercedes) without breaking the bank and keep it looking tasteful. More videos to come and please subscribe!

[@Manhotocu]

Sitting on this mercedes c250 is wonderful. I tried its engine. thank you

[@brucebaker744]

just got it installed, sounds amazing! another mod that i should've done years ago

[@TheFlexxGarage]

Awesome!!! Glad to hear! 😎🤙🏼

[@georgecostanza2695]

I wouldn't go so far as to say it sounds like a V8, but it does look AWESOME and sounds great... better than an I4 has any right to!

[@Woo.f32]

agreed, def sounds good tho

[@trento8397]

Sounds awesome

[@Ogrobz]

Thanks man, i want to swap my polo gti 6r to w204 I found answers about doing quad exhaust in your video Great job, man

[@TheFlexxGarage]

Glad I could help

[@jr7421]

I just setup my c250 with the magnaflow 13148 and the offset amg style tips. Sounds WAY better now. Thanks for the video Flexx

[@TheFlexxGarage]

It’s by far the best mod I’ve done to my car and a lot of people have been happy with the setup as well. Glad you enjoying it as well! 😎🤙🏼

[@cristianlittle3]

Do you have a link for the offset style tips ??

[@ilyasbuyuklu1587]

dude great mods congrats ! and thanks i will have the same exhaust for my c250 coupe tx

[@TheFlexxGarage]

Niiiiiiiiiice!!!!!!! You are going to love that exhaust setup!

[@fl0wmastr]

great video ! sounds good! thanks for the incite! i've seen the fake quad exhaust on ebay that doesnt require as much piping for 450

[@JOHN_WICK_101]

Great vid bro

[@TheFlexxGarage]

Thanks. Just here to help where I can.

[@sin.3]

Another great video brother, but imagine if you had an amg. Looking forward to the next project.

[@ShirjeelArshad]

Legit , helped me out alot!

[@TheFlexxGarage]

Nice. I had several owners do the same exhaust setup and they love it. Thank you for being a viewer! Make sure you subscribe and spread the word.

[@jordanberry4824]

Sounds good!!!

[@TheFlexxGarage]

thanks!!!

[@xXBaBNikAXx]

great vid!

[@TheFlexxGarage]

Thanks for viewing. Definitely subscribe for more great videos! A new video released every Sunday.

[@deank8068]

hey Flexx, what a awesome sounding, I have a 2017 c250(w205) with amg diffuser and also have downpipe&stage 2. do you think this "magnaflow XL 3 chamber stainless steel turbo muffler-2.25"C/2" dual-13148" can be fit with my c250?

[@abhichopra7217]

Thanks mate

[@raiyan70001]

This channel is super under-rated

[@TheFlexxGarage]

thanks man. I just started 3 weeks ago. Still trying to get the word out there via my facebook fan page, instagram, and other marketing activities. My goal is to help people. Anything else is just extra.

[@raiyan70001]

No prob, im friends with another w204 youtuber who happens to live by me. His names Raymond Urias. Ill tell him about you.

[@raiyan70001]

his channel is called Raymon Urias

[@TheFlexxGarage]

cool. I'll check it out. Thanks for the support man.

[@PNVVJAY]

Hey man, I’m curious how you think this setup would sound on a w204 c300 sedan? I’m mainly worried about drone, i know you said it was minimal to none. But with a 6cyl maybe that would change? I have no clue. I always see you replying to comments years after videos are posted, I think that’s awesome!

[@UntoDawn76]

I’ve got a 2014 C250 Coupe and am thinking about modifying the exhaust on it z

[@user-dl7fe6ut4b]

Original sound cool

[@jasonb4196]

Hey Flex, I need your advice/opinion for exhaust tips. I might go with a single tip exhaust both sides but not sure what size 3.5" or 4" single?

[@luxchannelx6039]

Hey flex can you tell us if the secondary part was the cat after all or a resonator ?

[@miightyalpha6245]

Recommend going with single inlet to single outlet and then doing a y pipe after to get the back pressure like stock but still being able to run quads

[@TheFlexxGarage]

That’s another option but too be honest, it doesn’t really matter in the c250. Exhaust setup (regardless what it is) is not gonna effect the performance that much. The c250 is slow already but it looks damn good! Lol

[@xXReApKiLlSXx]

Hey there Flex, do you know if this is possible on a C 200? Or rather if it’s worth doing on one? Cheers from New Zealand :)

[@joseesparza9757]

Question?… I had my c300 w204 straight piped straight to the headers. It sounded so good. It was loud, sounded mean and tough and would crackle💥& pop…. But I would stall out when I would be at a complete stop for a while. I would have to be playing with the shift knob. I would just keep tapping it left & right as if it was a standard transmission car but it was an automatic. Also sometimes as I was slowing down to a stop after not stopping for a while I would start stalling out. I would feel the gears and have to use my breaks and apply gas as if I was paddle shifting or using a standard transmission

[@rileyturner8198]

If you deleted your catalytic converters and didn't take care of the codes or add any resistors or anything than your car definitely won't be happy.

[@allex___a1031]

The dual pipes to connect the tips did you buy those or the shop sold them to you?

[@guneetsac]

Hey flexx I have a 2012 c250 cdi, what mods would you recommend for it. Preferably on the cheaper side

[@skywlk823]

How did you get your steering wheel emblem black? did you take the OEM on off & purchase it or take it off and dip it?

[@BB0777]

Hi Flexx, how can u understand no backpressure for the first muffler?

[@dieseltortilla]

Almost GTR look for those nice tips

[@713vinh]

I like the looks of the round dual exhaust tip that you got over the oval shape. What did you have to do to make it fit properly since you said there was a metal box in the way?

[@TheFlexxGarage]

Not sure. It’s not perfect on the right. The tips slightly point to the right instead of straight back because the middle inlet is hittin the box area. If you have an offset inlet, aligning the tips is easy and it will point straight back.

[@BB0777]

Flex hi , what about same setup with urs but magnaflow not at the middle but left&right at the end?

[@rahinhuq1608]

So I went to this locally renowned exhaust tuning shop recently and they recommended and gave me an estimate for a custom y-pipe setup leading to 2 11225 magnaflow mufflers and then the tips. What are your opinions on this? Btw the quote they gave me is over priced to around $1000.

[@keith7172]

Hey Flex! Quick question, when you were getting all of the stock piping removed in order to install the new muffler and everything what type of shop did you take the car too when you where going to get all the stock stuff removed below the cat

[@TheFlexxGarage]

The same muffler shop I always go to in my exhaust videos. Lou’s in Chelmsford ma.

[@gabe307]

Hey Flex! Quick question, I have a C250 and I want to get this done but I wanted to ask if you had to buy the piping that runs from the magna flow muffler to the quad tips separately or did the shop just pipe it for you, if so about how much did each pipe cost? thanks!

[@TheFlexxGarage]

no, exhausts shops do that. Its part of their price to install the muffler and tips. Usually $200-$400 depending on the shop and if you go aluminum or stainless steel.

[@bandito1290]

Hi i was wondering if you had to run different diameter piping? I see that the outlets for the muffler have a diameter of 2 inches but the inlet for the tips you linked are 2.5 inches. Did they have to modify the piping for it or use clamps to them together? Thanks so much, ive started modding my c class because of your vids!

[@TheFlexxGarage]

The shop will make it all work because they supply the piping to connect everything. It’s up the to shop on pipe size. Nobody uses clamps on a custom exhaust like this. Everything is welded.

[@jaydenorth8925]

how loud is it in decibels, to pass law requiements?

[@Blackberrybar]

Hello! tell me on the m274 (2l engine)? need to update? there were errors after installation(check engine)?

[@MoneySitchell]

Order my setup a week ago. Looking forward to it. Was this your first mod or did you do anything else before the exhaust? Thanks

[@laieakana8360]

Hey man, In the video where you said the quad tips should be the offset one, I didn’t order that and instead got some symmetrical quad tips. Will they still work on my c250 and can I just have them stick out a bit more?(yes I have the c63 diffuser installed as well and have a super 10 flow master waiting to be put on)

[@TheFlexxGarage]

symmetrical should be fine. That's what's on my C250. Offset ones are ideal and easier to work with but the symmetrical can still be fitted.

[@dieseltortilla]

Is this the diesel c250? For it being a bit black smoky under wot? also for the single exhaust tip? Eitherway super nice setup, they look clean, the diffuser bought where?

[@TheFlexxGarage]

This is then regular gasoline c250 coupe. It does get black on the tips but washes right off. I bought the diffuser on eBay. $70-$80. It's in my diffuser install video.

[@taylorgucci9243]

what year is your car ? i have a 2014 c250

[@all.hail.charles]

Is the link in the description still correct? the exhaust tips have a 2.5” inlet and the muffler has 2” outlets.

[@TH3_D3ADLY_DILF.]

Yeah it’s still correct

[@Variedadtema3109]

It sounds great men, i have a C200 coupe 2018, you think that punt Can function in mine?

[@TheFlexxGarage]

Don’t know. We don’t have a c200 in the US, so I have no clue how that car works or it’s parts to modify.

[@KLRCLWNTv]

what was the cost of labor from the mechanic?

[@clashofclanstricksandtips7481]

Will this fit on to a c180 1.6 AMG 2013??

[@dannycarrillo1749]

Did you have to buy the dual pipes online? Or does the muffler shops have some ?

[@allex___a1031]

Danny Carrillo that’s what I’m wondering

[@JuiceForJuice]

Do you guys thing that is gonna be ok if I get a 5x8 instead of 4x9 inch muffler? Still a 2.25/2 inch in/out

[@deanvo58]

did this increase the car performance/ hp?

[@Thereggaeboy1]

Hey Mr Flexx I got a MB C300 v6 Engine,could you help me to get that great sound of your car, I want my car to sound the same.

[@chickens366]

You should upload more exhaust clips on your Instagram 👌🏽👌🏽

[@TheFlexxGarage]

I will. Thanks!

[@penguinkid837]

Hey for ur quad tip magnaflow muffler set up? Did u do anything else to make it louder besides take out the resonators? I got the magnaflow muffler and quad tips installed but it seems a lot quieter than urs in the video

[@TheFlexxGarage]

Nope. What you see is final

[@TheFlexxGarage]

kzbin.info/www/bejne/jJaapqepiLmcm9E

[@ezequeilpena7208]

Was the MF xl any louder compared to the first one

[@odilonarista9610]

Hey Flex!!! I have a C250 4 door luxury and I want to make mine sounds better but I wanted to know If the 2 long pipes came with the magnaflow muffler or do I have to buy them separate? Btw love your vids brother 👌🏾👌🏾

[@TheFlexxGarage]

I didn't mention them because you dont buy them. Any muffler shop will run those for you. That's why it's called a custom exhaust setup.

[@odilonarista9610]

Flexx Alexander ahhh gotcha 👌🏾👌🏾

[@odilonarista9610]

Flexx Alexander appreciate it fammo. Keep the good content going My guy 🤘🏾👍🏾

[@omaraguilar3956]

Hey flex so what did they end up doing to get around that right side of that square box ?

[@TheFlexxGarage]

Nothing. Just maneuvered until it looks somewhat decent but it’s not perfectly straight.

[@cristianlittle3]

Do you have a link for the other quad tips with the offset inlet ?

[@JesusDisciple916]

Following, just in case he gives an answer.

[@jasoncuz420]

holy looks like a c63 w204

[@slah426]

Do you think I would be able to keep the secondary resonator (to have it a bit quieter) and then run the magnaflow muffler instead of stock resonator to the Quads?

[@WoodleyNoriega]

I was thinking about doing the same, did you keep the second res? How's the sound?

[@obabobai]

Obviously this is none of my business, but I was wondering; with all this money you have invested on the car (assuming you have paid for all the parts so far), wouldn't all that money have bought you an AMG?

[@tyewilson9174]

So I have a 2013C350 I am upgrading to quad exhaust. The exhaust that you recommend is it just one muffler or do I buy two?and I apologize this sounds like a dumb question but honestly I'm not mechanically inclined so I before I order it I want to make sure I order what I need. If you don't mind answering this question I really appreciate it

[@TheFlexxGarage]

A c350 already has 2 pipes and 2 mufflers. All you need to do is get 2 (single inlet to single outlet) mufflers....buy a set of quad tips, and make sure you buy a diffuser that will have openings large enough to fit the new quad tips. I would suggest your take your car to an exhaust shop and talk to them and tell them what I said above and get their input.

[@tyewilson9174]

@@TheFlexxGarage I appreciate you responding bck to my questions. I honestly didn't think I would hear from you. But yes sir I will do exactly what you suggested. Going tomorrow morning 😊👍

[@joaquincanals1866]

Where did you get the rear fairing to go from single left pipe-tip to quads?

[@TheFlexxGarage]

It’s in another video. Just go to my channel and search diffuser w204.

[@beautybeast8312]

Hi flexx I really like your channel and I think what are you doing here is amazing I want to ask you about the c250 because I am planning to buy one Are there any different between the c250 coupe 2doors and the c250 4 doors in ( front bumper, back bumper, Diffuser, and the hood) are the the same size and can I install the parts from the 4 doors to th coupe??

[@TheFlexxGarage]

Most is the same except trunk, wing, seats, door panels. You can interchange grille, front bumper, rear bumper, wheels, headlights, taillights. I’m not 100% sure if the hoods are the same.

[@beautybeast8312]

@@TheFlexxGarage thanks very mach I really like your car and you are the reason why I liked this car and want to buy like it thanks again very much

[@unik544]

I want to do this to my car but mine its a c250 cdi sport Will this improve the sound on diesel engines to? Or should i look for different parts? My car isnt quiet because i think it has a sound generator from factory but i want to improve a bit more Thx

[@sarmadkhan428]

Usually yo get sound out of a diesel you need to do a dpf delete, which also gives you a light that needs to be mapped out but will make the car sound amazing for a diesel

[@_StevenCutz_]

Hey Flexx I know this is late but by why didn’t you go with a y pipe instead ?

[@_StevenCutz_]

And what is the difference

[@panduhgaming5473]

how would you do it on a 2011 c300?

[@louka3891]

Hey Flex, do you think it's possible to have the same setup without removing the secondary cat/resonator?

[@TheFlexxGarage]

That’s how I first had it setup. Wasn’t that loud and it wasn’t throaty. It was kinda single note and “meh”.

[@louka3891]

@@TheFlexxGarage Thanks for your quick reply! Good luck with your next projects ✌🏼

[@ishraqislamlamin1735]

Hello Flexx, My Magnaflow 13148 just got delivered today, will be putting it up shortly. But taking a look at the muffler, there is no actual logo or branding on the muffler itself, but it did come in manufacture box and all the papers with it. Does your 13148 has branding or logo on the muffler itself? Or this is how the 13148 looks like? If possible could you also provide a picture of your 13148? I wanted to make sure that the genuine Magnaflow was sent to me. Usually I have seen all the magnaflow muffler with magnaflow branding on top.

[@TheFlexxGarage]

You’re not alone. That’s how they come. I’ve had numerous people ask me the same question. After the install, they were definitely happy and didn’t care if the logo was on the muffler or not.

[@ishraqislamlamin1735]

Flexx Alexander Ohh, I see now. Thats a relief haha. Now I can install it with no worries. Thank you

[@ThelPhon]

it doesn’t sound like a v8 it sounds like a wrx instead it still sound decent tho

[@razsburner4495]

Do you have to change the bumper/diffuser to have it able to fit the exhaust tips?

[@TheFlexxGarage]

Yes. You need a diffuser that has openings wide enough to support quad tips. Check out my other videos on a diffuser install.

[@alrey5572]

Looking for a muffler that makes noise when I hit the gas. I don't want any noise while it warms up and sits in driveway. I want to keep the classic feel to the car then when I press gas I want it to roar....any suggestions?

[@TheFlexxGarage]

Not possible unless you get a valve system that you can press a button and when you want it to roar.

[@slah426]

So how were you able to clear that box on the right side I have tips that are your kind of inlet :/

[@TheFlexxGarage]

It clears it if you have the tips stick out more from the diffuser. I didn’t do that though. Mine are just slightly, very slightly crooked to the right.

[@slavievityk6951]

Would my 09 c300 w204 sounds like this?

[@anthonyzimmerly1984]

Ngl this video just helped me decide to not touch the exhaust on this car this car just sounds quiet no matter what

[@TheFlexxGarage]

It will never sound "loud" but it can be louder than stock and have a better tone then stock. Still worth it to me and others but it's your car at the end of the day if you want to keep it stock.

[@MFabelgarcia]

What pipes did you use for after the muffler to make it a dual?

[@TheFlexxGarage]

You don’t buy pipes. The exhaust shop has them and custom cuts and installs them. That’s what exhaust shops do.

[@vladimiramador8178]

Yesssssss

[@TheFlexxGarage]

Oh yeah 😎🤙🏼

[@dannycarrillo1749]

Would I need to buy some pipes ?

[@K2Paranormal]

whats the over all length of the new pipes once fitted(from the cat)?

[@TheFlexxGarage]

Don’t know. That’s custom done by the shop. I don’t own this car anymore for years.

[@darkness17]

How did you get the second set of pipes on the other side when the bumper has took for only one? Was it a cutout or did you replace bumper?

[@TheFlexxGarage]

Pretty sure I mentioned in the video I changed the diffuser. This is an old video.

[@TheFlexxGarage]

I have a video on the diffuser install.

[@lalusastrawan6792]

Hey flex , I’m thinking to do this, but will any engine code pops out if I do this?

[@TheFlexxGarage]

It has nothing to do with engine or sensors to cause a fault

[@quintontolbert5270]

Does the size of the quad tips have to match the inlet and outlet of muffler?

[@TheFlexxGarage]

No. You want the inlet of the tips to be the same or slightly larger then the piping it’s going on. Any good exhaust shop can make it work.

[@jaymoney9054]

Did you dip your rims yourself it looks really nice

[@TheFlexxGarage]

Nahh. They aren’t dipped. They came matte black from Sparco. I’m planning to spray them gloss black once I mount my summer tires in a few weeks.

[@jaymoney9054]

great cant wait for that video

[@remetea]

Does this swap change the emissions? Will it pass an inspection?

[@bradboss8868]

Hey is this petrol or diesel, I have the diesel but the layout under the hood is different to yours

[@TheFlexxGarage]

Only gasoline c-class in the US

[@joaquincanals1866]

FLEX! What diffuser do you have at the rear? This one is perfect as opposed to the large fin one. I want to do this to my 2015 C 250 Coupe. Let me know. Thanks, man!!

[@TheFlexxGarage]

it's a standard C63 AMG diffuser. Sells for like $150-$200 I think on ebay. Just search for "W204 C-Class AMG Style Rear Bumper Diffuser"

[@joaquincanals1866]

Will that fit a 2015 C250 coupe???

[@joaquincanals1866]

Most fit 2012 to 2014.

[@TheFlexxGarage]

yes...as long as the C250 is the same looking as mine. Because in 2015 they had the W204 and the W205 c-clas platform. The 2012-2015ish C250 coupe are W204 so it will fit.

[@joaquincanals1866]

Great! Thanks, man! You are the best!

[@RamizSultan]

Anyone know how must this would cost in total?

[@jameswell8943]

Hi bro I need this kind of exhaust pipe for my car loud one

[@throwbacks3928]

Is it possible to find a carbon fiber defuser with a single note exhaust?

[@TheFlexxGarage]

I think they make one. It’s rare but jut check ebay.

[@jackyjimenez3453]

what did you do to the turbo to make it sound louder

[@TheFlexxGarage]

My turbo is not louder. Turbo sounds don’t get louder but you can get an intake and blow off valve and that will give the car a unique sound. I already did videos on these on my KZbin channel.

[@aneesoabdu227]

Bro how’s this car on gas?

[@Truevibe]

Hey quick question does your car have a dual clutch transmission, if so, why are you releasing your right foot off the gass when shifting?

[@mrturbo011]

No engine light or any issues like that after this mod? Thanks

[@TheFlexxGarage]

No. I would let people know if it did.

[@mrturbo011]

@@TheFlexxGarage thanks for all the info.

[@noahmurillo6048]

Is your car wrapped or paint Jon and how much was it?

[@TheFlexxGarage]

Wrapped. I made a whole video on it on my channel.

[@TheXaaav]

Hey Flexx, Has it changed your fuel consumption? Thanks

[@TheFlexxGarage]

Not mine

[@HalfManHalfTech]

I was looking for this comment

[@omaraguilar3956]

I had to keep my resonater on because the shop I went to said it was against the law to remove it I live in Texas btw is it gonna make a difference in sound?

[@TH3_D3ADLY_DILF.]

Yes it definitely makes a difference in sound

[@Dnasty1]

That's illegal in texas? Lol I'm in cali and they let me do it.

[@nathantaye9795]

On the c250 you think you could do a resonator delete and add an x pipe and do quad tip exhaust

[@TheFlexxGarage]

You can’t do an X pipe since there’s only 1 tube coming from the engine. You can only do an X pipe on a c300 that has dual pipes running from the engine.

[@nathantaye9795]

@@TheFlexxGarage oh ok so you could run a y pipe then right

[@TheFlexxGarage]

Yeh. You can. If you watch the video, I don’t need a Y pipe because my muffler has 2 outlet holes already but if you don’t wanna use the same muffler, you will need a Y pipe to split the single tube in order to route the pipes to a pair of exhaust tips.

[@nathantaye9795]

@@TheFlexxGarage oh ok you think the y pipe would make it louder or would it have same sound as your muffler

[@sflenterprises]

can this be done by not having to add quad tips+diffuser? where it would only have the stock one tip, stock diffuser, and that muffler welded. or are those 2 neccessary?

[@TheFlexxGarage]

Yup. Just buy the version of the muffler with single inlet and single out and do the same thing to my diagram but have a single pipe run to the oem diffuser opening and have the shop weld on the stock tip or a new tip.

[@sflenterprises]

@@TheFlexxGarage bet. Thanks

[@sflenterprises]

@@TheFlexxGarage should I look for the 13148? Cause I can’t find it in single inlet/outlet.. which one should I get which would sound like your c250?

[@TheFlexxGarage]

Don’t know. Just send a message to magnaflow and tell them my part and ask them for the same muffler but single to single. They’ll tell you so there’s no guessing game.

[@TheFlexxGarage]

By the way...did you watch my updated video? kzbin.info/www/bejne/jJaapqepiLmcm9E

[@dannylofoten4474]

Is that any way to get the gear change faster?

[@TheFlexxGarage]

Not that I know off. Might be able to get someone to tune the transmission but I bet it won’t improve much.

[@StraiyEU]

nice car... but i like the interior of the pre facelift more somehow...